Publications

Research Publications and Presentations

Department: Aviation and Transportation Technology

Timothy Ropp

Recent Publications, Conference Proceedings & Presentations:

Wang, Y., Anne, A., & Ropp, T.D. (2016). Applying the Technology Acceptance Model to Understand Aviation Students’ Perceptions toward Augmented Reality Maintenance Training Instructions: A Case Study.  International Journal for Engineering and Science.  Submitted - in Review September 2016.

Ropp, T.D. (2016). Aviation Week - Speed News 4th Annual Aerospace Manufacturing Conference.  Executive Roundtable Session, invited Keynote speaker: The Aerospace Technology Landscape: Preparing a Workforce as Pioneers. Belmond Charleston Place - Charleston, S.C.  May 3, 2016.

Leasure, M., Ropp, T.D., Chia, J., & Appold, E., (2015). Inspection, Maintenance and Repair Training for Civilian Unmanned Aircraft. Aviation Technology Education Council (ATEC) Journal, Fall 2015, Vol. 37, Iss. 2, pg. 21-23.

Ropp, T.D., Anne, A., Davis, J.M., (2014). Incorporating 3D printing as an introduction to digital manufacturing in an aeronautical engineering technology curriculum.  Aviation Technology Education Council (ATEC)Journal, Vol. 36: Iss. 2, pg. 1.

Anne, A., Garcia, E., Deng, K., Morrissette, J. & Ropp, T.D. (2014). Using Augmented reality in advanced aerospace manufacturing and maintenance. Purdue University Research Roundtable Poster Session.  Purdue Memorial Union Ballroom.  Nov. 11, 2014.

Ropp, T., Minkel, A., Dobson, J. & Reed, J. (2014). Visual Electronic Cumulative Threat and Operational Risk - “VECTOR”: Threat Management System for Aerospace Operations.  Purdue University Undergraduate Research Poster Symposium, April 8, 2014.

Hartman, N., & Ropp, T. (2013). Examining the use of model-based work instructions in the aviation maintenance environment. Proceedings of the 10th International Conference on Product Lifecycle Management, PLM13, 8th - 10th July 2013.  Nantes, France.

Ropp, T.D.; Thomas, E., Lee, S.; Broyles, A.; Lewin, P.; Andreychek, C. & Nicol, J. (2013).  Creating hybrid adaptive air vehicle technical work instructions using Augmented Reality and 2D Barcode    visualization technologies.  White paper.  Hangar of the Future Research Laboratory, Purdue University, West Lafayette, IN. June 2013.

Borsa, R., Dillman, B.G & Ropp, T.D. (2013). Exploring the impact of ADS-B NextGen technology requirements for general aviation. Proceedings of 17th International Symposium on Aviation Psychology (pp. 214-219).  Wright State University. Dayton, OH.  May 6 – 9, 2013. Paper and Poster session.

Ropp, T., Hedden, J.B., Mick, P., Davis, J. M., & Austin Jr., S.W. (2012). Incorporating advanced aircraft technologies into an Aeronautical Engineering Technology curriculum. Journal of Aviation       Technology and Engineering, Vol. 2: Iss. 1, Article 5. http://dx.doi.org/10.5703/1288284314863

Lu, C-t., Schreckengast, S., Ropp, T. D., & Dillman, B. (2011). System safety study; Pedagogical aviation action researchThe Journal of Aviation/Aerospace Education Research. (JAAER), 20(3), 17-23.

Ropp, T., Whittinghill, D., Bowen, E., Hansen, R., and Holmes, J. (2011, June).  Work in progress: Incorporating pervasive computing concepts into an aircraft maintenance job task card system.  Paper presented at the American Society of Engineering Education annual conference and exposition,   Vancouver, BC, Canada.

Dubikovsky, S., Ropp, T. D., & Lesczynski, T. (2010). Developing next generation research competencies through collaborative student design and advanced manufacturing projects.  International Journal of Applied Aviation Studies (IJAAS), 10(1), 219-225.

Ropp, T. D., & Dillman, B. G. (2010).  Standardized measures of safety: Finding global common ground for safety metrics. Technology Interface Journal, 10(3). Available online: http://www.technologyinterface.nmsu.edu/Spring10/

Ropp, T. D. (2009). Implementing safety management systems for aviation into an aviation technology curriculum.  Technology Interface Journal, (10) 2. Available online: http://www.technologyinterface.nmsu.edu/Winter09/

Johnson, M. E., & Ropp, T. D. (2009). Safety and process improvement using PFMEA in aviation courses and laboratories. Aviation Technician Education Council Journal (ATEC), 31(2), 10-17.

Ropp, T. D., Dubikovsky, S., & Johnson, M. (2009).  Using peer and team performance assessments as learning tools on collaborative student projects.  Journal of Aviation/Aerospace Education and Research (JAAER), 18(3), 48-55.

Woo, I., Kim, S. Y., Maciejewski, R., Ebert, D., Ropp, T., & Thomas, K. (2009). A context-preserving interactive visualization system for technical diagrams. Computer Graphics Forum, 28(3), 943-950.
 

 

Stewart Schreck...

MITRE Publications

Schreckengast, S. (September, 1996). Flight Crew Accident and Incident Human Factors:  Data Access, Integration and Analysis Process, 96W069.

Schreckengast, S. (September, 1996). Flight Crew Accident and Incident Human Factors:  Data project Design Document for Integration Tool (IT), 96W0116.

Schreckengast, S. (October, 1997). Safety Roundtable on Runway Incursion Prevention, 97W0108.

Schreckengast, S. (February, 1998). Bangkok International Airport, Airfield Simulation and Gate Scheduling Analysis, 98W015.

Schreckengast, S. (1999).  Assessment of the Egyptian Civil Aviation Airports Sector.

Schreckengast, S. (June, 1999).  Airport Certification Manual for Egyptian Civil Aviation Authority.

Egyptian Civil Aviation Regulations: Parts 139 – Certification of Airports, 107 – Airport Security, 108 – Airline Security, 109- Air Cargo Security, 110 – Protection of Navigational Aids. (1999-2002).

Several additional publications were conducted; however, their release to the public has not been approved.  These would include but are limited to:

MITRE Technical Reports (2003) international airports in Argentina.

MITRE Technical Reports (2013) international airports in India.

MITRE Technical Reports (2014) international airports in Argentina and Uruguay.

Non-MITRE Publications

Schreckengast, S. (September, 1995). Security Plan for the National Aviation Safety Data Analysis System (NASDAC), Federal Aviation Administration.

Schreckengast, S. (1998). Gaining Control over Controlled Flight Into Terrain, Royal Aeronautical Society, London.

Schreckengast, S. (2000). Airline/Airport Emergency Planning, Handbook of Airline Operations, McGraw Hill.

Cason, B., Lu, C-T., & Schreckengast, S. (2010).  Are we secure? Surveying FAA FAR 139 class IV general aviation airports.  Journal of Transportation Security. 87-104.

Lu, C-T., Schreckengast, S., & Preudhomme, J. (2010). GA airport security: has the threat been overlooked? Journal of Transportation Security.

Lu, C-T., Schreckengast, S., & Ropp, T. (2010). System safety study I: The application of Action Research (AR). Journal of Aerospace/Aviation Education Research.

Schreckengast, S. (2010). Departure flight into terrain (D-FIT). Proceedings of the Flight Safety Foundation 63rd annual international air safety seminar Milan, Italy.

Lu, C., Schreckengast, S., Ropp, T. D. & Dillman, B. (2011). System Safety Study: Pedagogical Aviation Action Research. Journal of Aviation/Aerospace Education & Research, 20(3).

Schreckengast, S. (2011). Pre-departure safety risk management. Proceedings of the CASI AERO 2011 Conference Montreal, Canada.

Lu, C-T., Young, J., Schreckengast, S. & Chen, H. (Summer, 2011). Safety Culture: The Perception of Taiwan’s Aviation Leaders. International Journal of Applied Aviation Studies (IJAAS).  (p. 27-45).

Lu, C-T., Schreckengast, S. & Jai, J. (Fall, 2011).  Safety Risk Management, Assurance, and Promotion: A Hazard Management System for Budget Constrained Airports. Journal of Aviation Technology and Engineering (JATE). (p. 2-10).

Lu, C-T. & Schreckengast, S. (2012). Regulatory Compliance: A Case of Airport Safety Management System Using Open Source CMS, 2012 Air Transport Research Society, Tainan, Taiwan, June 27-30, 2012.

Schreckengast, S. & Hiatt, K. (June/July, 2012). The Purdue Approach. ICAO TrainingReport, 2(1), 10-12.

Schreckengast, S. (2014). SMS - Reaching beyond low hanging fruit. International Journal of Aviation, Aeronautics, and Aerospace, 1(1).

Schreckengast, S. & Drury, D. (2015). Regional Airlines Early Career Pilot Attributes Study. International Journal of Aviation, Aeronautics, and Aerospace.

Spencer, T., Fanjoy, R., Lu, C-T. & Schreckengast, S. (2015). International standardization compliance in aviation. Journal of Air Transport Management. Vol. 49.

 

Ronald Sterkenburg

Journals

  1. Sterkenburg, R., Wang, P. H., Kutch, E. R., & Dubikovsky, S. (2011). Assessing tensile strength of damaged fiberglass specimens repaired with UV cure fiberglass prepreg patches. International Review of Aerospace Engineering, 4, 43-47.
  2. Dubikovsky, S., Goodrich T. A., & Sterkenburg R. (2011). Incorporating industry-recognized safety practices into a       university-level technology curriculum. International Review of Aerospace Engineering,3, 268-273.
  3. Sterkenburg, R., Wang, P. H., Kutch, E. R., & Dubikovsky, S. (2011). Assessing tensile strength of damaged fiberglass specimens repaired with UV cure fiberglass prepreg patches. International Review of Aerospace Engineering, 4, 43-47.
  4. Dubikovsky, S., Goodrich T. A., & Sterkenburg R. (2011). Incorporating industry-recognized safety practices into a university-level technology curriculum. International Review of Aerospace Engineering,3, 268-273.
  5. Trouw, R. E., Wang, P. H., Sterkenburg, R., & Dubikovsky, S. (2010). Titanium foil repair: an Accelerated field repair method for composite aerospace vehicles. International Review of Aerospace Engineering, 3,186-192.
  6. Kumar, B., Sun, C. T., Wang, P. H. & Sterkenburg, R. (2010). Adding additional load paths in a bonded/bolted hybrid joint. Journal of  Aircraft, 47, 1593-1598.
  7. Wang, P. H., Sterkenburg, R., Rahm, B. J. & Dubikovsky, S. (2010). An Innovative repair method for composite aircraft using VaRTM techniques. ATEC Journal, 33, 11-15.
  8. Dubikovsky, S., Goodrich, T. A., & Sterkenburg, R. (2010). Open-ended practical projects improve preparedness of undergraduate students for aerospace industry. Collegiate Aviation Review, 28 (1), 55-62.
  9. Sterkenburg, R., Dubikovsky, S., & Stanley, D. (2009). Practical advanced aerospace manufacturing and assembly projects for engineering technology students. International Review of Aerospace Engineering, 2, 246-252.
  10. Sterkenburg, R., Stanley, D. L. (2009). Preparing aviation maintenance personnel for the support of next generation composite aircraft. ATEC Journal, 31, 5-9.
  11. Sterkenburg, R., Dubikovsky, S., & Ropp, T. D. (2009). New initiatives for aviation study abroad programs. Journal of Aviation Management and Education, 1-10.
  12. Ropp, T. D., Dubikovsky, S., & Sterkenburg, R. (2007). Using collaborative learning projects to blend teamwork and technical competences in an aviation technology curriculum. World Transactions on Engineering and Technology Education, 6(2), 337-339.

Refereed Conference Proceedings

  1. Sterkenburg, R., Skyock, M. K., & Wang, P. H. (2012). Demonstrating a composite material repair technique for aerospace structures utilizing a secondary bonded VARTM technique. Proceedings of the 2011 SAMPE technical conference, Fort Worth, Texas.
  2. Sterkenburg, R., & Wang, P. H. (2012). Enhancing Undergraduate Student Learning Experience through Research and Innovation. Proceedings of the International Conference on Educational Research (ICER 2011), Khon Kaen, Thailand.
  3. Sterkenburg, R., Khoury, C. H., Wang, P. H., & Dubikovsky S. (2011). Investigating the effects of fluids on carbon fiber aircraft structures. Proceedings of the 2011 SAMPE technical conference, Long Beach, California.
  4. Adams, D. E, Sharp, N.D, Myrent, N., and Sterkenburg, R. (2011). Inspection for kissing bonds in composite materials using vibration measurements. Proceedings of the SPIE conference.
  5. Wang, P. H., Sterkenburg, R., Buland, E. M., & Dubikovsky, S. (2010). Assessing the effectiveness of UVcured VaRTM repairs for composite aircraft. Proceedings of the 7th Asian-Australasian Conference on composite materials, Taipei, Taiwan.
  6. Khoury, C., Sterkenburg, R., Wang, P. H., & Dubikovsky. (2010). Investigating the effects of de-icing fluids on the structural properties of bonded composite aircraft structures. Proceedings of the 7th Asian-Australasian Conference on composite materials, Taipei, Taiwan.
  7. Sterkenburg, R., & Dubikovsky, S. (2010). Assessing the effect of studying abroad on the global awareness of engineering and technology students. Proceedings of the 12th world conference on continuing engineering education, Singapore.
  8. Wang, P. W., Sterkenburg, R., Lu, H. C., & Youngblood, J. P. (2010). Assessing the effectiveness of UVcured VaRTM repairs of composite aircraft. Proceedings of the 2010 SAMPE fall technical conference, Salt Lake City, Utah.
  9. Dubikovski, S., Grandt, A. F., Goodrich, T. A., Sterkenburg, R. (2010). Undergraduate capstone projects integrate technology and engineering programs. Proceedings of the International conference on engineering education ICEE 2010, Gliwice, Poland.
  10. Fehrenbacher, J., Trouw, R., Sterkenburg, R., & Dubikovsky, S. (2010).  Titanium foil: an accelerated field repair of composite aerospace vehicles. Proceedings of the SAMPE Europe 31th international technical conference & forum, Paris, France.
  11. Sterkenburg, R., Rahm, B. J., & Dubikovsky, S. (2010). A titanium and carbon fiber hybrid repair patch using vacuum assisted resin transfer molding. Proceedings of the 2010 SAMPE technical conference, Seattle, Washington.
  12. Sterkenburg, R., & Stanley, D. L. (2009). Interdisciplinary hands-on education for engineering and technology students. Proceedings of the International Conference on the role of universities in hands-on education, Chiang Mai, Thailand.
  13. Kumar, B., Sterkenburg, R., Wang, P. H., & Sun, C. T. (2009). A novel and efficient hybrid lap joint for metallic structures. Proceedings of the 2009 SAMPE technical conference, Baltimore, USA.
  14. Sterkenburg, R., Dubikovsky, S., & Ropp, T. D. (2008). University sponsored research for undergraduate students: ribbonized organized and integrated wiring systems for aerospace vehicles. Proceedings of the 2008 International Conference of Engineering Education, Budapest, Hungary.
  15. Sun, C. T., Kumar, B., Wang, P., & Sterkenburg, R. (2008). Strength enhancement of hybrid (bonded/bolted) joints for composites using attachments. Proceedings of the 1st joint Canadian & American technical conference, Newark, Delaware.
  16. Sterkenburg, R., & Dubikovsky, S. (2007). Global experiences of aviation students. Proceedings of the international conference on engineering education, Coimbra, Portugal.
  17. Sterkenburg, R., & Dubikovsky, S. (2007). Introducing sheet metal design and manufacturing using CATIA V5 and CNC Equipment in an aircraft materials course. Proceedings of the international conference on engineering education, Coimbra, Portugal.
  18. Textbooks
  19. Kroes, M, Watkins, W, Delp, & Sterkenburg, R. (in press). Aircraft Maintenance & Repair 7th. Columbus, OH: McGraw-Hill.
  20. Sterkenburg, R & Wang, P. H. (in press). Composite Aircraft Manufacturing, Repair, and Testing. Avotek Information Resources, Weyers Cave: VA.
  21. Sterkenburg, R. (2012). Airframe Workbook for Aviation Maintenance Technician handbook. Tabernash, CO: Aircraft Technical Book Company.
  22. Sterkenburg, R. (2012). US Department of Transportation Federal Aviation administration FAA-H-8130-32 Aviation maintenance technician handbook  -  Powerplants. Washington, DC: United States Government Printing Office.
  23. Sterkenburg, R. (2012). US Department of Transportation Federal Aviation administration FAA-H-8130-31 Aviation maintenance technician handbook  -  Airframe. Washington, DC: United States Government Printing Office
  24. Sterkenburg, R. (2008).  US Department of Transportation Federal Aviation Administration FAA-H-8130-30 Aviation maintenance technician handbook General. Washington, DC: United States Government Printing Office.
  25. Wild, T., & Sterkenburg, R. (2006). Turbine engine technology (in print) Avotek information Resources, Weyers Cave: VA
  26. Wild, T., & Sterkenburg, R. (2006). Aviation maintenance technician airframe test guide. Avotek Information Resources, Weyers Cave: VA. 
  27. Wild, T., & Sterkenburg, R. (2006). Aviation maintenance technician powerplant  test guide. Avotek Information Resources, Weyers Cave: VA.
  28. Wild, T., & Sterkenburg, R. (2006). Aviation maintenance technician general test  guide. Avotek Information Resources, Weyers Cave: VA.
James Thom

Articles

  1. Thom, J.M., Hagovsky, T.C., Stanley, D.L., Hendricks, R. M., Johnson, M.E., and  Dubkovsky, M. I.  (In press).  Is ABET for You? History and Rationale of Pursuing ABET. Inc. Accreditation.  Aviation Technical Education Council Journal. 19-2., 45-54.
  2. Thom, J.M., S.I. Dubikovsky, T.C. Hagovsky, D.L. Stanley, R.M. Hendricks (In Press). A Historical Perspective for Incorporating the Airframe and Powerplant Certificate as a Relevant Engineering Technology Skill.  JAAER. 19-2., 45-54.
  3. Thom, J.M. and Gerbracht, T. L. (2008). Study of an Aviation Design Supportability Course for Engineering and Technology.  JAAER. 17-2., 33-49.
  4. Thom, J.M. and Thom, M.A. (2006).  Back to the Future: A survey of Engineering and Technology Education over the Last Century.  Aviation Technical Education Council Journal. 28-1., 24-30.
  5. Thom, J.M. and Brzezenski, J. (2006).  Turbine Powerplants: Using the A&P Course to Fulfill Engineering Needs.  Aviation Technical Education Council Journal. 28-1.,9-13.
  6. Hagovsky, T.C., Thom, J.M., Young, J.P. (2004).  WebCT ™ In the Technical Classroom: Strengths and Weakness’ of Using the Delivery Method.  Aviation Technical Education Council Journal. 26-1., 4-6.
  7. K. McNamara,* Thom,* J.M., & R. E. Thompson  (2005).  Improving Safety in a High Reliability/Low Commitment Work Environment, Collegiate Aviation Review, 22-1., 9-15.
  8. Thom,* J.M., & D. R. Clarrett,*.  (2005).  A Structured Methodology for Adjusting Perceived Risk, Collegiate Aviation Review, 22-1.,97-121.
  9. Thom,* J.M.  & T.C. Hagovsky (2004).  Aircraft Wire Rope: Beyond the AC 43.13), Aviation Technical Education Council Journal. 25-2., 4-12.
  10. Thom*, J.M., & Pickering, M.  (2002).  A New Look at Motivators for Women to Enter Aviation Maintenance,  Aviation Technical Education Council Journal, 23-2,4-8.
  11. Thom, J.M. (2001). Diagnostic Data for Repair and Overhaul, Aviation Technical Education Council Journal, 22-2.,4-7.
  12. Thom*, J.M. (1997). Industry Inputs for Better Communication Training for Aviation Maintenance Students. Aviation Technical Education Journal, 19 (1), 8-10.
  13. Kimble*,M.A. and Thom*, J.M. (1997). The Elimination of Halon: Nothing Else Works Like It. Aviation Technical Education Journal, 18 (2), 8-10.
  14. Kimble*,M.A. and Thom*, J.M. (1996). A Background on the Elimination of Freon. Aviation Technical Education Journal, 18 (1), 8-10.
  15. Thom,* J.M. (1996). ASTM, CRC and the Replacement Fuels for Leaded Aviation Gasoline. Aviation Technical Education Journal, 17 (2), 7-9.
  16. Thom,* J.M. (1994). Who Dreamed Up This Design?. Aviation Technical Education Journal, 16 (2), 4-8.
  17. Kimble*, M.A. and Thom*, J.M. (1994). Skydrol, Why the Bad Rap? Aviation Technical Education Journal, 16 (1), 5-7.
  18. Thom*, J.M. (1993) A Background Study of the Ozone Depletion Issue.  Journal of Avionics Education, 2 (1), 17-36
  19. Kimble*, M.A. and Thom*, J.M. (1993).  Freon and Halon Replacement; Possibilities and Problems.  Journal of Avionics Education, 3 (1), 11-17.
John Wensveen, Ph.D.

Wensveen, J.G. (2016). Reconnecting Europe with a “Mega-Hub’ Airport: A Crisitunity, International Airport Review. http://www.internationalairportreview.com/25661/airport-extra/reconnecti...

 

Wensveen, J.G. (2015). Air Transportation: A Management Perspective 8th ed., Ashgate Publishing, London, UK.


Leick, Ryan and John G. Wensveen. (2014). "The Airline Business." in: Prokop, Darren (ed.) The Business of Transportation. Vol. 1. Modes and Markets. Santa Barbara, CA: Praeger. Chapter 4. pp. 65-99. ISBN: 978-0-313-39735-6
 

Wensveen, J.G. (2014). Op-Ed: Long-haul real estate – who will get it right?, Runway Girl Network. http://www.runwaygirlnetwork.com/2014/03/16/long-haul-real-estate-will-g...
 

Wensveen, J.G. (2014). Australia Should Remove Owner Restriction, Runway Girl Network. http://www.runwaygirlnetwork.com/2014/03/06/oped-australia-should-remove...

 

Wensveen, J.G. & Leick, R. (2013). ‘The Airline Business’. The Business of Transportation. Praeger Publishers, Westport, CT.
 

Wensveen, J.G. (2013). How Much Do Airport Administrators Make? Houston Chronicle. http://work.chron.com/much-airport-administators-make-18201.html
 

Wensveen, J.G. (2012). Air Transportation: A Management Perspective 7th ed., Ashgate Publishing, London, UK.
 

Wensveen, J.G. (2011). Creating a Cargo Airline Business Plan. http://www.american-friendship.com
 

Wensveen, J.G. and R. Leick (2009). ‘The Long-Haul, Low-Cost Carrier: A Unique Business Model. Journal of Air Transport Management. Elsevier Science. Vol./Issue 15/3 103-105.
 

Wensveen, J.G. (2008). Air Transportation: A Management Perspective 6th ed., Ashgate Publishing, London, UK.
 

Wensveen, J.G. (2008). Wheels Up: Airline Business Plan Development 2nd ed., Krieger Publishing, Malabar, FL.
 

Wensveen, J.G. (2005). Wheels Up: Airline Business Plan Development, Thomson-Brooks/Cole, and Belmont, CA. 
 

Wells, A.T. and Wensveen, J.G. (2004). Air Transportation: A Management Perspective 5th ed., Thomson-Brooks/Cole, Belmont, CA.
 

Wensveen, J.G. (2004). ‘El nuevo sistema de transporte con aeronaves paquenas’. Aviation Latin America (ALA).  Vol./Issue 10/6 32-33.
 

Wensveen, J.G. (2003).‘The Changing Nature of Aviation and Aerospace: An Academic Perspective’, Business Xpansion Journal, Vol. 5/Iss. 8, 88-89.
 

Wensveen, J.G. and Raghavan, S. (2003). SATS: A Real Options Approach to Corporate Aviation, Air Transport Research Society Annual Conference, July 10-12, 2003, Toulouse, France. (Conference Paper and Presentation)
 

Wensveen, J.G. (2002). ‘Small Aircraft Transportation System (SATS): The Impact on Corporate Aviation’. NBAA Flight Department Operations On-Line (http://www.nbaa.org/ops/sats.htm). NBAA.
 

Wensveen, J.G. (2001). ‘The Optimal Air Carrier Hub Location for Europe in the 21st Century’. Handbook of Airline Strategy: Challenges and Solutions, Regulatory Issues, and Public Policy. McGraw-Hill. 639-664.
 

Wensveen, J.G. (2001). ‘Will New Technology Impact Corporate Aviation?’ NBAA Digest, February/March 2001.
 

Wensveen, J.G. (2001). ‘Crisis u oportunidad’. Aviation Latin America (ALA). 7/9. 22-23.
 

Wensveen, J.G. (2000).  ‘Is Airport Congestion A Crisis Situation or An Opportunity for Airlines?’ Airports Americas. 8/3. 16-17.
 

Wensveen, J.G. (2000). ‘Is Airport Congestion A Crisis Situation or An Opportunity for Airlines?’. The Leader Magazine. Embry-Riddle Aeronautical University Press. Spring 2000. 17.
 

Wensveen, J.G. (2000). ‘Airports Council International (ACI), Greenport ’99 Conference and Exhibition – Thinking Green –
 

Wensveen, J.G. (2000). ‘Strategies for Balanced Airport Development in the Next Century’. Journal of Air Transport Management. Elsevier Science. Vol./Issue 6/3 167-171.
 

Wensveen, J.G. (1999). ‘Airports Council International, Greenport ’99 Conference and Exhibition – Thinking Green – Strategies for Balanced Airport Development in the Next Century, Amsterdam, The Netherlands, 21-23 April 1999’. Journal of Transport Geography. Pergamon Press. Vol./Issue 7/4 294-297.
 

Wensveen, J.G. (1999). “Vancouver Vacation”. Gair Rhydd. 22 March 1999: 20. (Welsh Newspaper)
 

Wensveen, J.G. (1998). ‘The UK Industrial Water Treatment Systems Market’. Merlin Media/Broadcast Services Ltd. Cardiff, Wales UK.
 

Wensveen, J.G. (1998). ‘The UK Industrial Glass Washing Market’. Merlin Media/ Broadcast Services Ltd. Cardiff, Wales UK.
 

Wensveen, J.G. (1998). ‘Airports Council International, Airports – A Strategic Response to the Liberalised Market, Seville, Spain, 1-3 December 1997’. Journal of Transport Geography. Pergamon Press. Vol./Issue 6/4 312-313.
 

Wensveen, J.G. ‘Airports and Airwaves’. UVic Torch Autumn 1998. University of Victoria.
 

Wensveen, J.G. and I.M. Humphreys (1998). ‘A Hub for Europe in the 21st Century’. University of Wales Occasional Paper. University of Wales Cardiff.
 

Wensveen, J.G. (1998). ‘Optimal air carrier location and airline route network: the case for Europe’. Swansea Geographer. University of Wales Swansea.
 

Wensveen, J.G. “Roxana”. The Sands of Time. Owing Mills, Maryland: National Library of Poetry, 1997. 17

 

John Young

         Adjekum, D.K., Keller, J., Walala, M., Christensen, C., DeMike, R.J., Young, J.P. & Northam, G.J. (2016). An examination of the relationships between safety culture perceptions and safety reporting behavior among non-flight collegiate        aviation majors.  International Journal of Aviation, Aeronautics, and Aerospace, 3(3).  Retrived from http://commons.erau.edu/ijaaa/vol3/iss3/7

 

  1. Johnson, M., Zhao, X., Faulkner, B. & Young, J. (2016).  Statistical Models of Runway Incursions Based on Runway Intersections and Taxiways. Journal of Aviation Technology and Engineering, 5(2), 15-26.

  2. Adjekum, D. K., Keller, J., Walala, M., Young, J. P., Christensen, C., & DeMik, R. J. (2015). Cross-sectional assessment of safety culture perceptions and safety behavior in collegiate aviation programs in the United States. International Journal of Aviation, Aeronautics, and Aerospace, 2(4), 3. doi:10.15394/ijaaa.2015.1074

  3. Kirschner, J. E., Young, J., & Fanjoy, R. (2014). Stress and coping as a function of experience level in pilots. Journal of Aviation Technology and Engineering, 3(2), 14-19.
  4. Young, J. et al. (2013).  The international student within collegiate aviation: Maximizing the global experience.  Scholarly Workshop presented at Fall Education Conference. University Aviation Association: San Juan, Puerto Rico.
  5. Sperlak, L., Dubikovsky, S., & Young, J. (2013, April). Introduction of multimedia usage in aviation maintenance and aeronautical engineering programs. International Review of Aerospace Engineering, 6(2), 109-113.
  6. Kieta, A. & Young, J. (2013).  Effects of music tempos on pilot performance.  Proceedings of the AT Graduate Research Symposium.  West Lafayette, IN.
  7. Stewart, D. & Young, J. (2013).  Integrating disabled individuals into the aviation industry.  Proceedings of the AT Graduate Research Symposium.  West Lafayette, IN.
  8. Cozza, B. & Young, J. (2013).  Runway incursions: A case study analysis.  Proceedings of the AT Graduate Research Symposium.  West Lafayette, IN.
  9. Garibay, A. & Young, J. (2013).  Reducing general aviation accidents by utilizing airline operational strategies.  Proceedings of the AT Graduate Research Symposium.  West Lafayette, IN.
  10. Mlady, J. & Young, J. (2013).  Measurement of airline passenger satisfaction: A comparison of methodology.  Proceedings of the AT Graduate Research Symposium.  West Lafayette, IN.
  11. Garcia, B. & Young, J. (2013).  A human error analysis of runway incursion accidents using the human factors analysis and classification system.  Proceedings of the AT Graduate Research Symposium.  West Lafayette, IN.
  12. Young, J.P. (2012). "The threat from within: Promotion and Tenure of our aviation faculty."  Invited opening session speaker: University Aviation Association Education Conference.  Murfreesboro, TN.
  13. Leib, S., Dillman, B., Petrin, D., & Young, J. (2012).  A comparison of the effect of variations to U.S. airport terminal signage on the successful wayfinding of Chinese and American cultural groups.  Journal of Aviation Technology and Engineering, 1(2), 79-89.  doi: 10.5703/1288284314661
  14. Chien, C-t, Young, J., & Schreckengast, S. (2011). Safety culture: The perception of Taiwan's aviation leaders.  International Journal of Applied Aviation Studies, 11(1), 27-45.
  15. Cassens, R., Young, J., Greenan, J., & Brown, J. (2011). Elements related to teaching pilots aeronautical decision making.  Collegiate Aviation Review. 29(1), 10-17.
  16. Fanjoy, R.O., Young, J. P., & Suckow, M. W. (2006). The experience factor: A regional airline view of pilot candidate experience. Collegiate Aviation Review, 24 (1), 67-72.
  17. Young, J. P., Fanjoy, R. O. & Suckow, M. W. (2006). Impact of glass cockpit experience on manual flight skills. Journal of Aviation/Aerospace Education and Research, 15(2), 27-32.
  18. Fanjoy, R. O., Young, J. P. & Dillman, B. G. (2005). Exit exams for college flight programs: Redundant activity or certification of competency? Collegiate Aviation Review, 23 (1), 24-31.
  19. Fanjoy, R. O. & Young, J. P. (2005). Flight deck automation: Line pilot insight for improved initial pilot training. International Journal of Applied Aviation Studies, 5 (1), 13-24.
  20. Hagovsky, T.C., Thom, J.M., & Young, J.P.  (2004).  WebCTtm in the technical classroom: Strengths and weaknesses of using the delivery method.  ATEC Journal, 26(1), 4-8.
  21. Fanjoy, R.O. & Young, J.P. (2004).  Training levels and methodologies for glass cockpit training in collegiate aviation.  Journal of Aviation/Aerospace Education and Research, 13(2), 35-41.
  22. Young, J.P. & Fanjoy, R.O. (2003).  Advanced collegiate flight automation training:  What is needed and at what cost?  International Journal of Applied Aviation Studies, 3(2), 215-225.
  23. Young, J.P. & Fanjoy, R.O. (2002).  Glass cockpit technology training: How is it addressed in collegiate flight programs?  Collegiate Aviation Review, 20(1), 85-94.
  24. Fanjoy, R.O. & Young, J.P. (2001).  The transfer of flight training procedures from an advanced airline flight simulator to the classroom. Collegiate Aviation Review, 19(1), 41-48.
  25. Mattson, M.F., Petrin, D.A., & Young, J.P. (2001).  Integrating safety in the aviation system: Interdepartmental training for pilots and maintenance technicians.  Journal of Air Transportation World Wide, 6(1), 37-64.
  26. Petrin, D.A., Mattson, M.F., & Young, J.P. (2000).  Survey results suggest need for more effective reporting of aircraft maintenance discrepancies.  International Civil Aviation Journal, 55(1), 17, 28, 29.
  27. Petrin, D.A. & Young, J.P. (1994).  Professional pilot studies: Proposed content.  Journal of Aviation/Aerospace Education and Research, 4(3), 31-36.
  28. Leighton, C. & Young, J. (2012).  Study of private pilots’ decisions to continue visual flight into instrument meteorological conditions.  Proceedings of the AT Research Symposium. West Lafayette, Indiana.
  29. Steele, L. & Young, J. (2012).  Exploratory study in pilot communications: Verbal versus texting communication. Proceedings of the AT Research Symposium. West            Lafayette, Indiana.
  30. Riordan, M. & Young, J. (2012).  The effects of transitioning to glass panel aircraft from traditional-gauge instrumentation on FAR Part 61 instrument checkride success. Proceedings of the AT Research Symposium. West Lafayette, Indiana.
  31. Colligan, P. & Young, J. (2012).  Industry perception of small aircraft transportation systems.  Proceedings of the AT Research Symposium. West Lafayette, Indiana.
  32. Sperlak, L. & Young, J. (2012).  The effect of supplemental video instruction on aviation student performance.  Proceedings of the AT Research Symposium. West Lafayette, Indiana.
  33. Ramirez, N. & Young, J. (2012).  Personality factors in aeronautical decision making. Proceedings of the AT Research Symposium. West Lafayette, Indiana.
  34. Cassens, R. & Young, J. (Sept. 2011). Elements related to teaching pilots aeronautical decision making.  Professional paper presentation at University Aviation Association Fall Education Conference, Indianapolis, IN.
  35. Kozak, B, Lopp, D., Ropp, T., & Young, J. (2011). The selection of commercial astronauts for suborbital spaceflight. Proceedings of the 16th Biennial Symposium on Aviation Psychology. Dayton, Ohio.
  36. Vala, L., Nolan, M., Dillman, B., Bowen, E., & Young, J. (2011). Use of digital performance in the flight training environment. Proceedings of the 16th Biennial Symposium on Aviation Psychology. Dayton, Ohio.
  37. Bourguignon, L., Petrin, D., Dillman, B., & Young, J. (2011). Can video games be a valid predictor of success for the private pilot phase check? Proceedings of the 16th Biennial Symposium on Aviation Psychology. Dayton, Ohio.
  38. Jewel, P. & Young, J. (2011). Flight operational quality assurance: Data analysis implementation and role in a collegiate flight training environment. Proceedings of the AT Research Symposium.  West Lafayette, Indiana.
  39. Kirschner, J. & Young, J. (2011). The stress coping skills of undergraduate aviatiors.  Proceedings of the AT Research Symposium. West Lafayette, Indiana.
  40. Tong, G., Petrin, D., Lu, C., & Young, J. (2011). Fatigue risk management in business aviation: The worker's perception on the knowledge of fatigue and its effects. Proceedings of the AT Research Symposium. West Lafayette, Indiana.
  41. Jewel, P. & Young, J. (2011). Flight operational quality assurance: Data analysis, implementation, and role in a collegiate flight training environment. Proceedings of the AT Research Symposium. West Lafayette, Indiana.
  42. Wesslen, E. & Young, J. (2011). Pilot performance: Round dial and vertical tape altimeters. Proceedings of the AT Research Symposium. West Lafayette, Indiana.
  43. Summers, H. & Young, J. (2011). Assessment of collision avoidance measures in the training environment. Proceedings of the AT Research Symposium. West Lafayette, Indiana.
  44. Hiremath, V., Proctor, R., Fanjoy, R., Feyen, R., & Young, J. (2009).  Comparison of pilot recovery and response times in two types of cockpits.  Lecture Notes in Computer Science: Vol. 5618.  Proceedings of Symposium on Human Interface 2009.  San Diego, CA: Human Computer Interaction International.  doi: 10.1007/978-3-642-02559-4_83           
  45. Proctor, R.W., Young, J.P., Fanjoy, R.O., Feyen, R.G., Hartman, N.W., & Hiremath, V.V. (2005).  Simulating glass cockpit displays in a general aviation flight environment.  Proceedings of the 13th Biennial Symposium on Aviation Psychology, Oklahoma City, Oklahoma, 481-484.
  46. Hagovsky, T.C., Thom, J.M., & Young, J.P.  (2004). WebCTtm in the technical classroom: Strengths and weaknesses of using the delivery method.  ATEC Conference Proceedings [CD], Las Vegas, Nevada.
  47. Young, J.P, Mattson, M.F., & Petrin, D.A. (2000, Spring).  Industry survey results:  Implications for communication of critical aircraft information between pilots and maintenance technicians.  SAE General Aviation Conference Proceedings, Wichita, Kansas, Report Number SAE 2000-01-1706.
  48. Young, J.P, Mattson, M.F., & Petrin, D.A. (1999).  Integrating the aviation system toward safety: Implications of interdepartmental human factors training for pilots and maintenance technicians.  Proceedings of the 10th Biennial Symposium on Aviation Psychology, The Ohio State University, Columbus, Ohio, 2, 1060-1065.
  49. Young, J.P. (1995). Using group dynamics to reinforce CRM concepts in a collegiate course.  Proceedings of the 8th Biennial Symposium on Aviation Psychology, The Ohio State University, Columbus, Ohio, 2, 1189-1191.
  50. Young, J.P. (1995).  Cockpit (crew) resource management: Development of a collegiate course. In N. Johnston, R. Fuller, & N. McDonald (Eds.), Aviation psychology: Training and selection (pp. 11-16). Aldershot, England: Ashgate Publishing Limited.
  51. Young, J.P. (1991).  Entry level crew qualifications.  Proceedings of the Air Transport Association of America, Airline Operations Forum, San Diego, California, 257-262.
  52. Young, J.P., Petrin, D.A., & Mattson, M.F., (2000, April 3).  Wanted: Pilot-mechanic interface.  Aviation Week & Space Technology, 152(14), 17.
  53. Young, J.P. (1997).  Reducing human error:  Developing industry partnerships in aviation higher education.  Paper presented at  Symposium on achieving global transportation objectives:  Economic, technical, and practical solutions, Mexico City, Mexico.
  54. Young, J.P. (1991, November) Aviation safety organizations study. (Available from PRC Aviation, Tucson, Arizona).
  55. Petrin, D.A. & Young, J.P. (1991, Fall).  Cockpit resource management. FAA General Aviation News, 30(5), 14-17.
  56. Petrin, D.A. & Young, J.P. (1991, July).  Cockpit resource management. Flight Training, 18-21.
  57. Nationally published instructional materials for FAA airmen test preparation
  58. Wild, T.W., Young, J.P., & Petrin, D.A. (1989).  Flight engineer question book.  Casper, WY: International Aviation Publishers, Inc.
  59. Young, J.P., Petrin, D.A., & Wild, T.W. (1988).  Commercial pilot question book.   Casper, WY: International Aviation Publishers, Inc.
  60. Petrin, D.A., Wild, T.W., & Young, J.P. (1988).  Private pilot question book.   Casper, WY: International Aviation Publishers, Inc.

Department: Computer and Information Technology

Victor Barlow

Textbooks and Editorships of Journals/Proceedings

  1. Whitten, Jeffrey L., Bentley, Lonnie D., and Barlow, Victor M., (1994) Instructor’s Guide to Accompany Systems Analysis and Design Methods, 3rd edition Richard D. Irwin, Times Mirror Higher Education Group, Inc. (ISBN 0-256-09362-8)
  2. Whitten, Jeffrey L., Bentley, Lonnie D., and Barlow, Victor M., (1994) Projects and Cases to Accompany Systems Analysis and Design Methods, 3rd edition Richard D. Irwin, Times Mirror Higher Education Group, Inc. (ISBN 0-256-09361-X)
  3. Whitten, Jeffrey L., and Bentley, Lonnie D., and Barlow, Victor M., (1994) Systems Analysis and Design Methods, 3rd edition Richard D. Irwin Publishing. (ISBN 0-256-09360-1)
  4. Whitten, Jeffrey L., Bentley, Lonnie D., and Barlow, Victor M., (1989) Instructor’s Guide to Accompany Systems Analysis and Design Methods, 2nd edition Richard D. Irwin, Times Mirror Higher Education Group, Inc.
  5. Whitten, Jeffrey L., Bentley, Lonnie D., and Barlow, Victor M., (1989) Projects and Cases to Accompany Systems Analysis and Design Methods, 2nd edition Richard D. Irwin, Times Mirror Higher Education Group, Inc.
  6. Whitten, Jeffrey L., and Bentley, Lonnie D., and Barlow, Victor M., (1989) Systems Analysis and Design Methods, 2nd edition Richard D. Irwin, Times Mirror Higher Education Group, Inc.

Refereed Articles and Conference Papers/Presentations/Abstracts

  1. Barlow, Victor M. (January 2004). Computer Certification: Useful Curriculum Benchmark or Unnecessary Swindle?. Ronald Clute, The 2004 College Teaching and Learning Conference Orlando, FL: Western Academic Press.
  2. Barlow, Victor M. (October 2003). The Role of Personal Factors in Job Selection Among High-Tech College Graduates. Ronald Clute, The 2003 International Business & Economics Research Conference (IBER) Las Vegas, NV: Western Academic Press.
  3. Barlow, Victor M., Homkes, Rick, Payne, Michael J. (March 1999). Assessment in the Classroom. ASEE IL/IN Sectional Conference Dekalb, IL: Northern Illinois University.
  4. Barlow, Victor M. (April 1996). WWW Page Development and HTML as a Teaching Tool. Midwest Computer Conference Chicago, IL: University of Chicago.
  5. Barlow, Victor M. (May 1995). Creating World Wide Web Pages Using Microsoft Word. International Information Management Association Charlotte, NC: University of North Carolina - Charlotte.

Workshops

  1. Barlow, Victor M. (2011, October). UML Modeling Tools and Techniques. As part of the TECSUP study abroad program held at Purdue University, designed and delivered a two-day, four hour, mini-course on UML Modeling Tools and Techniques, containing both lecture and laboratory elements. This mini-course, a condensation and adaptation of CNIT 180 and CNIT 280, was delivered to TECSUP students and faculty and Purdue CIT students., West Lafayette, IN.
  2. Barlow, Victor M. (1992, April). Creating and Validating Process Models Using Excelerator. Information Systems Education Conference (ISECON), Chicago, IL.

Reviews

  1. Khan, Mohammed, (1987) Beginning Structured COBOL Merrill Publishing Company.
  2. Fowler, George, (1986) COBOL Programming: A Problem Oriented Approach Boyd & Fraser Publishing Company.
Lonnie Bentley

Textbooks and Editorships of Journals/Proceedings

  1. Whitten, Jeffrey L., and Lonnie D. Bentley, (2007) Systems analusis and design methods, 7th edition MHHE. (ISBN-13: 978-0-07-305233-5 ISBN-10: 0-07-305233-7)
  2. Whitten Jeffrey L., and Lonnie D. Bentley, (2007) Introduction to systems analysis and design MHHE. ((contracted - in production))
  3. Whitten*, Jeffrey L., Bentley*, Lonnie D., and Dittman, Kevin C., (2004) Systems analysis and design methods, 6th editionIrwin/McGraw-Hill, McGraw-Hill Companies, Inc.. ((724 pages). Scheduled for general availability 6-27-03. ISBN 0072474173.)
  4. Whitten*, Jeffrey L. and Lonnie D. Bentley*, (2001) Instructor’s guide to accompany systems analysis and design methods, 5th editionIrwin/McGraw-Hill, McGraw-Hill Companies, Inc.. (Available only via McGraw-Hill On-Line Learning Center.)
  5. Bentley, Lonnie D., (2001) Projects and cases to accompany systems analysis and design methods: Tool Crib System Irwin/McGraw-Hill, McGraw-Hill Companies, Inc.. (Available only via McGraw-Hill On-Line Learning Center)
  6. Whitten*, Jeffrey L. and Lonnie D. Bentley*, (2001) Instructor’s resource CD-ROM to accompany systems analysis and design methods 5th edition Irwin/McGraw-Hill, McGraw-Hill Companies, Inc..
  7. Whitten*, Jeffrey L., Bentley*, Lonnie D., and Dittman, Kevin C., (2001) Systems analysis and design methods, 5th editionIrwin/McGraw-Hill, McGraw-Hill Companies, Inc.. ((724 pages). The 5th edition has been translated into five languages and has adoptions in all 50 states. Over 700 universities adopted this textbook. Total unit sales reached 45,000 copies. ISBN 0-07-231539-3)
  8. Whitten*, Jeffrey L. and Lonnie D. Bentley*, (1998) Instructor’s resource CD-ROM to accompany systems analysis and design methods 4th edition Irwin/McGraw-Hill, McGraw-Hill Companies, Inc. (ISBN#0-256-25713-2)
  9. Whitten*, J. L., Bentley*, L. D., and Dittman K. C., (1998) Systems analysis and design methods (4th ed.) Richard D. Irwin Publishing. ( ISBN # 0-256-19906-X (724 pages))
  10. Whitten*, J. L., Bentley*, L. D., and Dittman K. C., (1998) Instructors Edition: Systems analysis and design methods (4th ed.) Richard D. Irwin Publishing. (This book is an instructor’s version of the main textbook and includes 89 pages of supplemental material. ISBN # 0-256-23826-X)
  11. Whitten*, J. L., and Bentley*, L. D., and Barlow*, V. M., (1994) Projects and cases to accompany systems analysis and design methods (3rd ed.) Richard D. Irwin Publishing. (ISBN # 0-256-09361-X (138 pages))
  12. Whitten*, J. L., and Bentley*, L. D., and Barlow*, V. M., (1994) Test items to accompany systems analysis and design methods (3rd ed.)Richard D. Irwin Publishing. (ISBN # 0-256-09363-6 (220 pages))
  13. Whitten*, J. L., and Bentley*, L. D., and Barlow*, V. M., (1994) Transparency masters to accompany systems analysis and design methods (2nd ed.) Richard D. Irwin Publishing. (ISBN # 0-256-09365-2 (264 pages))
  14. Whitten*, J. L., Bentley*, L. D., and Barlow, V. M., (1994) Instructor’s annotated: systems analysis and design methods Richard D. Irwin Publishing. ( ISBN # 0-256-10132-9. This book is an instructor’s version of the main textbook and includes 90 pages of supplemental material)
  15. Whitten*, J. L., Bentley*, L. D., and Barlow, V. M., (1994) Systems analysis and design methods (3rd ed.) Richard D. Irwin Publishing. (ISBN # 0-256-09360-1 (868 pages))
  16. Whitten*, J. L., and Bentley*, L. D., and Barlow*, V. M., (1994) Instructor's guide to accompany systems analysis and design methods (3rd ed.) Richard D. Irwin Publishing. (ISBN # 0-256-09362-8 (363 pages))
  17. Whitten*, J. L., Bentley*, L. D., and Barlow, V. M., (1989) Systems analysis and design methods (2nd ed.) Richard D. Irwin Publishing. (ISBN # 0-256-07493-3 (797 pages))
  18. Whitten*, J. L., and Bentley*, L. D., and Barlow*, V. M., (1989) Projects and cases to accompany systems analysis and design methods (2nd ed.) Richard D. Irwin Publishing. (ISBN # 30-2953-02 (124 pages))
  19. Whitten*, J. L., and Bentley*, L. D., and Barlow*, V. M., (1989) Instructor's guide to accompany systems analysis and design methods (2nd ed.) Richard D. Irwin Publishing. (ISBN # 0-256-07495-X (554 pages))
  20. Whitten*, J. L., and Bentley*, L. D., and Barlow*, V. M., (1989) Test items to accompany systems analysis and design methods (2nd ed.)Richard D. Irwin Publishing. (ISBN # 0-256-07693-6 (184 pages))
  21. Whitten*, J. L., and Bentley*, L. D., (1987) Using EXCELERATOR for systems analysis and design Times Mirror College Publishing. (ISBN # 0-8016-5462-9 (210 pages))
  22. Whitten*, J. L., and Bentley*, L. D., (1986) Projects and cases to accompany systems analysis and design methods Times Mirror College Publishing. (ISBN # 0-8016-5465-3 (159 pages))
  23. Whitten*, J. L., and Bentley*, L. D., (1986) Instructor's guide to accompany systems analysis and design methods Times Mirror College Publishing. (ISBN # 0-8016-1546-4 (369 pages))
  24. Whitten*, J. L., and Bentley*, L. D., (1986) Test items to accompany systems analysis and design methods Times Mirror College Publishing. (ISBN # 0-8016-1567-3 (158 pages))
  25. Whitten*, J. L., and Bentley*, L. D., and Barlow*, V. M., (1986) Transparency masters to accompany systems analysis and design methods Richard D. Irwin Publishing. (ISBN # 0-256-08231-6 (264 pages))
  26. Whitten*, J. L., Bentley*, L. D., and Ho, T. I. M., (1986) Systems analysis and design methods Times Mirror College Publishing. (ISBN # 0-8016-5464-5 (847 pages))

Refereed Articles and Conference Papers/Presentations/Abstracts

  1. Feller*, Steven A., Taggart E. Smith*, Lonnie D. Bentley, and John A. Mendonca (submitted). Information systems/Information technology leadership development. Journal of Engineering and Technology Management
  2. Ulmer*, John, and Lonnie D. Bentley* (2001). Business Process Redesign: Theory and Practice. AMCIS 2001 Conference Boston, MA.
  3. Feller*, Steven A., and Lonnie D. Bentley* (2001). Business Process Reengineering: The Birth. The Downfall. The Resurrection?. AMCIS 2001 Conference Boston, MA.
Gary Bertoline

Recent Articles

Chandramouli, M., Bertoline, G., Elbadwi A.Q. I. (2014) Geometry and Graphics for Developing a Multimodal Multidimensional Desktop Virtual Reality framework, Proc. of the Annual Conf. of the International Association of Journals & Conferences, Orlando, FL.

Chandramouli, M., Takahashi, & Bertoline. G. R. (2014) Desktop VR Centered Project Based Learning in ET Courses Using a Low-cost Portable VR System, Proc. of the American Association of Engineering Education Conference, Indianapolis, IN.

Chandramouli, M., and Bertoline, G. (2013) Stimulating Interest in Technological and Engineering Literacy Using a Multidimensional Desktop Virtual Reality Framework. Proceedings of the American Society of Engineering Education.

Springer*, M. L., Bertoline, G. R., & Schuver, M. T. (2011).  Challenges of Building on Bedrock Programs in Professional Education.  ASEE/CIEC 2011 Conference. San Antonio, Texas.

Springer*, M. L., Bertoline, G. R.  (2011).  Building an academic center infrastructure for professional development.  Conference proceedings of the 2011 ASEE Conference, Vancouver, Canada.

Springer*, M. L., Lybrook, D. L, & Bertoline, G. R.  (2011).  Building a distance learning hybrid program in organizational leadership.  Conference proceedings of the 2011 ASEE Conference, Vancouver, Canada.

Dyrenfurth*, M., Murphy, M., Bertoline, G. R., Herrick, R., Newton, K., O’Donnell, G., Castell, N., Barcelo, M., Ribera-Sancho, M., & Garcia, J., Barnes, J. L., Kuder, M.  (2011).  Critical issues and lessons learned in establishing concurrent international MS degree programs in engineering technology.  Conference proceedings of the 2011 ASEE Conference, Vancouver, Canada.

Dyrenfurth*, M., Murphy, M., Bertoline, G. R., Herrick, R., Newton, K., O’Donnell, G., McHale, D., Castell, N., Barcelo, M., Balas, D., Ribera-Sancho, M., & Garcia, J.  (2010).  Concurrent masters degrees across the Atlantic: Innovations, issues & Insights.  Conference proceedings of the 2010 ASEE Conference, Louisville, KY.

Dyrenfurth*, M., Murphy, M.,  & Bertoline, G. R.  (2010).  Quality indicators for engineering & technology education.  Conference proceedings of the 2010 ASEE Conference, Louisville, KY.

Park*, J., Kim, K., Tan, H. Z., Reifenberger, R., Bertoline, G. R., Hoberman, T., & Bennett, D. (2010). An initial study of visuohaptic simulation of point-charge interactions. Proceedings of the Symposium on Haptic Interfaces for Virtual Environments and Teleoperator Systems 2010, Waltham, MA, pp. 425-430, March 25-26, 2010.

Chandramouli*, M., Bertoline, G. R., Abe Harris, L.  (2009).  PC-based photorealistic virtual environments to facilitate construction design and nondestructive testing.  Conference proceedings of the 2009 ASEE Conference, Austin, TX.

Chandramouli*, M., Bertoline, G. R., and Harris, L. V.  (2009).  Photo-realistic virtual environments to facilitate construction design and non-destructive testing. Conference proceedings of the 2009 ASEE Conference, Austin, TX.

Bertoline*, G. R., and Schuver, M.  (2009).  Center for professional studies in engineering technology.  Conference proceedings of the 2009 ASEE Conference, Austin, TX.

Bertoline, G. R.  (2009).  Applied and use-insprired research for engineering technology: A rationale for defining a research domain.  Conference proceedings of the 2009 ASEE Conference, Austin, TX.

Hacker*, T., Bertoline, G. R.  (2008).  A Curriculum for Petascale Computing.  Proceedings of  the 3rd TeraGrid Conference,  June 2008, Las Vegas, NV.

V. Sundaram*, Y. Ru, B. Benes, L. Zhao, X. C. Song, T. Park, G. Bertoline, M. Huber. An Integrated System for Near Real-Time 3D Visualization of NEXRAD Level II Data Using TeraGrid. Proceedings of TeraGrid 2008 Conference, Las Vegas, NV, June 9-13, 2008.

Dorjgotov*, E., Bertoline, G. R.,  Arns, L., Pizlo, Z., & Dunlop, S. R.  (2008).   Force amplitude perception in six orthogonal directions.   In Proceedings of the 16th International IEEE Symposium on Haptic Interfaces for Virtual Environment and Teleoperator Systems (HAPTICS), pp. 121–127, 2008.

 

Recent Journal Articles

Chandramouli, M. & Bertoline, G. R. (2014).  A genetic algorithm based optimization framework to visualize, evaluate, and modify 3D space configurations in Desktop VR. International Journal for Simulation and Multidisciplinary Design Optimization, 5, A01. http://www.ijsmdo.org/articles/smdo/full_html/2014/01/smdo130004/smdo130...

Chandramouli, M., & Bertoline, G. R. (2013). A Review of Multi-Objective Design Optimization and the Use of Genetic Algorithms Interior Design Optimization. International Journal of Engineering Research & Innovation. 5(1), 33-40. http://www.ijeri.org/issues/spring2013/spring2013.htm

Chandramouli, M., Narayanan, B., & Bertoline, G. R. (2013). A Graphics Design Framework to Visualize Multi-dimensional Economic Datasets. Engineering Design Graphics Journal, Volume 77(3), 1-14. http://www.edgj.org/index.php/EDGJ/article/view/382

Chandramouli*, M., Bertoline, G. R., Connolly, P.  (2009).  Generating Alternative Engineering Designs by Integrating Desktop VR with Generic Algorithms.  Engineering Design Graphics Journal, 73(3):1-12.

Hartman*, N., Sarapin, M., Bertoline, G. R., & Sarapin, S.  (2009).  Examining the nature of technology graduate education.  Journal of Technology Studies, 35(1), 76 – 82. 

Madhavan*, K. P. C., Arns, L. L., & Bertoline, G. R.  (June 2005).  Inside Envision Center.  Campus Technology 18(10), 38-41.

Madhavan*, K. P., Arns, L. L., Bertoline, G. R.  (2005).  A distributed rendering environment for teaching animation and scientific visualization, Journal of Computer Graphics and Applications, 25(5), 32-38.  

Jeffrey Brewer

Textbooks and Editorships of Journals/Proceedings

  1. Jeffrey L. Brewer and Kevin C. Dittman, (2013) Methods of IT Project Management, 2nd edition Purdue Press.
  2. Brewer, J.L., Dittman, K.C., (2010) Methods of IT Project Management Upper Saddle River, NJ: Pearson/Prentice Hall.

Refereed Articles and Conference Papers/Presentations/Abstracts

  1. Thomas Bunton and Jeffrey L. Brewer (October 2012). Discovering Workplace motivators for the millennial generation of IT employees. Association for Computer Machinery Special Interest Group for Information Technology Education Calgary, Canada.
  2. Brewer, J. , Harriger, A. and Mendonca, J. (2006). Beyond the model: building an effective and dynamic IT program.. Journal of Information Technology Education (In Press.)
  3. Kane, M. and Brewer, J. (2006). An information technology emphasis in biomedical informatics education.. Journal of Biomedical Informatics (In Press.)
  4. Brewer, J. , Dittman, K. and Ghatge, G. (2006). A study of software methodology analysis: "great taste or less filling". Information Systems Educators Journal ((In Press).)
  5. Brewer,J. (October 2006). Benefits achieved from self and peer assessments in student led group projects.. College Teaching & Learning Conference Las Vegas, NV. (Accepted.)
  6. Kane, M., Brewer, J., Goldman, J. and Moidu, K. (October 2006). Integrating bioinformatics, clinical informatics, and information technology in support of interdisciplinary curriculum development.. ACM/SIGITE Conference Minneapolis, MN. (Accepted.)
  7. Brewer, J. and Oman, G. (January 2006). Add business value using agile value stream improvement process.. Applied Business Research & Teaching Learning Conference Orlando, FL.
  8. Brewer, J. (July 2006). Improving learner understanding of object-oriented information systems development.. 13th International Conference on Learning Montego Bay, Jamaica.
  9. Brewer, J. and Dittman, K. (2006). Meeting the challenges of today's IT labor demands by building a better prepared student thru targeted curricula enhancements.. Review of Business Information Systems Journal (In Press.)
  10. Brewer, J. (2005). Project managers, can we make them or just make them better?. ACM/SIGITE Conference (pp.167-173). Newark, NJ.
  11. Lorenz, L. J., Brewer, J.L. (May 2005). Preparing students to run projects: a self evaluation mapping our curriculum to needed project management learning ourcomes. IRMA
  12. Brewer, J.L. (2004). Project management best practices to increase success. Encyclopedia of Information Science and Technology (pp.2335 - 2340). Idea Group Reference.
  13. Brewer, J. L., Lorenz, L. J. (October 2003). Using UML and agile development methodologies to teach Object-Oriented analysis and design tools and techniques.. ACM/SIGITE
  14. Mendonca, J. & Brewer, J.L. (2003). The case for a less methodical methodology: lean, light, extreme, adaptive, agile and appropriate software development. Practicing Software Engineering in the 21th Century (pp.42 - 52). IRM Press.
  15. Brewer, J.L. (2002). A course model for information technology project management instruction based on the project management institute's body of knowledge. ISECON

Reviews

  1. Pinto, J., (2006) Project Management: Achieving Competitive Advantage. Saddle River, NJ: Prentice Hall.. (Reviewed 6 chapters.)

Pages