Publications

Research Publications and Presentations

Department: Computer Graphics Technology

Gary Bertoline

Recent Articles

Chandramouli, M., Bertoline, G., Elbadwi A.Q. I. (2014) Geometry and Graphics for Developing a Multimodal Multidimensional Desktop Virtual Reality framework, Proc. of the Annual Conf. of the International Association of Journals & Conferences, Orlando, FL.

Chandramouli, M., Takahashi, & Bertoline. G. R. (2014) Desktop VR Centered Project Based Learning in ET Courses Using a Low-cost Portable VR System, Proc. of the American Association of Engineering Education Conference, Indianapolis, IN.

Chandramouli, M., and Bertoline, G. (2013) Stimulating Interest in Technological and Engineering Literacy Using a Multidimensional Desktop Virtual Reality Framework. Proceedings of the American Society of Engineering Education.

Springer*, M. L., Bertoline, G. R., & Schuver, M. T. (2011).  Challenges of Building on Bedrock Programs in Professional Education.  ASEE/CIEC 2011 Conference. San Antonio, Texas.

Springer*, M. L., Bertoline, G. R.  (2011).  Building an academic center infrastructure for professional development.  Conference proceedings of the 2011 ASEE Conference, Vancouver, Canada.

Springer*, M. L., Lybrook, D. L, & Bertoline, G. R.  (2011).  Building a distance learning hybrid program in organizational leadership.  Conference proceedings of the 2011 ASEE Conference, Vancouver, Canada.

Dyrenfurth*, M., Murphy, M., Bertoline, G. R., Herrick, R., Newton, K., O’Donnell, G., Castell, N., Barcelo, M., Ribera-Sancho, M., & Garcia, J., Barnes, J. L., Kuder, M.  (2011).  Critical issues and lessons learned in establishing concurrent international MS degree programs in engineering technology.  Conference proceedings of the 2011 ASEE Conference, Vancouver, Canada.

Dyrenfurth*, M., Murphy, M., Bertoline, G. R., Herrick, R., Newton, K., O’Donnell, G., McHale, D., Castell, N., Barcelo, M., Balas, D., Ribera-Sancho, M., & Garcia, J.  (2010).  Concurrent masters degrees across the Atlantic: Innovations, issues & Insights.  Conference proceedings of the 2010 ASEE Conference, Louisville, KY.

Dyrenfurth*, M., Murphy, M.,  & Bertoline, G. R.  (2010).  Quality indicators for engineering & technology education.  Conference proceedings of the 2010 ASEE Conference, Louisville, KY.

Park*, J., Kim, K., Tan, H. Z., Reifenberger, R., Bertoline, G. R., Hoberman, T., & Bennett, D. (2010). An initial study of visuohaptic simulation of point-charge interactions. Proceedings of the Symposium on Haptic Interfaces for Virtual Environments and Teleoperator Systems 2010, Waltham, MA, pp. 425-430, March 25-26, 2010.

Chandramouli*, M., Bertoline, G. R., Abe Harris, L.  (2009).  PC-based photorealistic virtual environments to facilitate construction design and nondestructive testing.  Conference proceedings of the 2009 ASEE Conference, Austin, TX.

Chandramouli*, M., Bertoline, G. R., and Harris, L. V.  (2009).  Photo-realistic virtual environments to facilitate construction design and non-destructive testing. Conference proceedings of the 2009 ASEE Conference, Austin, TX.

Bertoline*, G. R., and Schuver, M.  (2009).  Center for professional studies in engineering technology.  Conference proceedings of the 2009 ASEE Conference, Austin, TX.

Bertoline, G. R.  (2009).  Applied and use-insprired research for engineering technology: A rationale for defining a research domain.  Conference proceedings of the 2009 ASEE Conference, Austin, TX.

Hacker*, T., Bertoline, G. R.  (2008).  A Curriculum for Petascale Computing.  Proceedings of  the 3rd TeraGrid Conference,  June 2008, Las Vegas, NV.

V. Sundaram*, Y. Ru, B. Benes, L. Zhao, X. C. Song, T. Park, G. Bertoline, M. Huber. An Integrated System for Near Real-Time 3D Visualization of NEXRAD Level II Data Using TeraGrid. Proceedings of TeraGrid 2008 Conference, Las Vegas, NV, June 9-13, 2008.

Dorjgotov*, E., Bertoline, G. R.,  Arns, L., Pizlo, Z., & Dunlop, S. R.  (2008).   Force amplitude perception in six orthogonal directions.   In Proceedings of the 16th International IEEE Symposium on Haptic Interfaces for Virtual Environment and Teleoperator Systems (HAPTICS), pp. 121–127, 2008.

 

Recent Journal Articles

Chandramouli, M. & Bertoline, G. R. (2014).  A genetic algorithm based optimization framework to visualize, evaluate, and modify 3D space configurations in Desktop VR. International Journal for Simulation and Multidisciplinary Design Optimization, 5, A01. http://www.ijsmdo.org/articles/smdo/full_html/2014/01/smdo130004/smdo130...

Chandramouli, M., & Bertoline, G. R. (2013). A Review of Multi-Objective Design Optimization and the Use of Genetic Algorithms Interior Design Optimization. International Journal of Engineering Research & Innovation. 5(1), 33-40. http://www.ijeri.org/issues/spring2013/spring2013.htm

Chandramouli, M., Narayanan, B., & Bertoline, G. R. (2013). A Graphics Design Framework to Visualize Multi-dimensional Economic Datasets. Engineering Design Graphics Journal, Volume 77(3), 1-14. http://www.edgj.org/index.php/EDGJ/article/view/382

Chandramouli*, M., Bertoline, G. R., Connolly, P.  (2009).  Generating Alternative Engineering Designs by Integrating Desktop VR with Generic Algorithms.  Engineering Design Graphics Journal, 73(3):1-12.

Hartman*, N., Sarapin, M., Bertoline, G. R., & Sarapin, S.  (2009).  Examining the nature of technology graduate education.  Journal of Technology Studies, 35(1), 76 – 82. 

Madhavan*, K. P. C., Arns, L. L., & Bertoline, G. R.  (June 2005).  Inside Envision Center.  Campus Technology 18(10), 38-41.

Madhavan*, K. P., Arns, L. L., Bertoline, G. R.  (2005).  A distributed rendering environment for teaching animation and scientific visualization, Journal of Computer Graphics and Applications, 25(5), 32-38.  

Vetria Byrd

Publications

Visualizing Diversity (In Visualization). 1st CRA-W/CDC Broadening Participation in Visualization (BPViz) Workshop featured in CASC Brochure 2015 (page 15) http://casc.org/papers/2015Brochure.pdf

1st CRA-W/CDC Broadening Participation in Visualization (BPViz) Workshop. By Vetria L. Byrd. Computing Research News. April 2014 Vol. 26/No.4. Invited Article. URL: http://cra.org/resources/crnarchive-view-detail/1st_cra-w_cdc_broadening...

Byrd Emphasizes Value of Visualization at XSEDE14, by Trish Barker, HPCWire July 31, 2014. URL: http://www.hpcwire.com/2014/07/31/byrd-emphasizes-value-visualization-xs...

Byrd, VL, and Witten, TM. (2006, June). Needs Assessment for Scientific Visualization of Multivariate, High-Dimensional Microarray Data. The 2006 World Congress in Computer Science, Computer Engineering, & Applied Computing Conference (BIOCOMP’06): 103-109. Las Vegas, Nevada, USA.

Byrd, VL, Mayfield-Donahoo T, Reddy, MS, Jeffcoat, MK. Semiautomated image registration for digital subtraction radiography. Oral Surgery Oral Medicine Oral Pathology 85:473-8, 1998.

Published Abstracts

Byrd V, Pulliam R, Reddy MS and Jeffcoat MK: Accuracy of simulated lesion detection using semiautomatic alignment for digital subtraction radiography in human subjects. Journal of Dental Research, Volume 76 Special Issue, IADR 2854, 1997.

Byrd V, Mayfield-Donahoo T, Pulliam R, Reddy MS and Jeffcoat MK: Semiautomatic alignment and correction of affine geometric discrepancies for digital subtraction radiography. Journal of Dental Research, Volume 75 Special Issue, IADR 1694, 1996. 

Byrd V, Mayfield-Donahoo T, Reddy MS and Jeffcoat MK: Automated selection of reference points for superimposition of radiographs. Journal of Dental Research, Volume 74 Special Issue, IADR 451, 1995.

Invited Presentations

“Facilitating the Enculturation of Undergraduates into Visualization through Workshops and Research Experiences in Collaborative Data Visualization Applications,” VisTECH Workshop, SC14, New Orleans, November 17, 2014

“Research Experience for Undergraduates in Collaborative Data Visualization Applications: Broadening Participation in Visualization,” Council on Undergraduate Research REU Symposium, Arlington, VA, October 26-27, 2014

The Banbury Center Meeting on “High Performance Computing in Undergraduate Biology Education,” Banbury Center, Cold Spring Harbor Laboratory, Long Island, NY, Invited Talk, September 3-5, 2014.

“Visualization: A Catalyst for Communication, Conduit for Collaboration and Participation,” Plenary Talk, XSEDE14, Atlanta, GA, July 2014

TechTalk, “High Performance Visualization at Clemson”, Clemson University, Clemson, South Carolina, November 2013

“Introduction to Scientific Visualization Using ParaView: A Primer for XSEDE13,” El Alliance, Webinar, March 2013

Conference Presentations (Workshops & Tutorials)

Workshop: “A Beginner’s Guide to Information Visualization featuring Tableau ,” UC Berkeley, August 10, 2015 (Invited Workshop)
Tutorial: “A Beginner’s Guide to Visualization featuring Gephi and ParaView.” 2015 Tapia Conference, Boston, MA, February 18-21, 2015
“Scaling Up Diversity in REU's: Broadening Participation of Underrepresented Groups in Undergraduate Research Experiences”, Birds of a Feather (BOF): 2015 Tapia Conference, Boston, MA, February 18-21,2015
“Advancing Frontiers of Interdisciplinary Research through Visualization,” Booth Presentation, SC14, New Orleans, LA, November 18-21, 2014
“Outcomes from the 1st CRA-W/CDC Broadening Participation in Visualization Workshop,” Booth Presentation, SC14, New Orleans, LA, November 18-21, 2014
“Introduction to Information Visualization Using Tableau,” Workshop, Cyberinfrastructure Expo, Clemson University, Clemson, SC, September 22 – 23, 2014
“Introduction to Scientific Visualization Using ParaView,” Workshop, Cyberinfrastructure Expo, Clemson University, Clemson, SC, September 22 – 23, 2014
Tutorial: “A Beginner’s Guide to Visualization featuring Gephi and ParaView, XSEDE14, Atlanta, GA –July 18 – 21, 2014

“Listening To Undergraduate Students about REUs: A BOF for Advocates of Increasing Participation in the Computational Sciences;” Birds of a Feather (BOF): Co-Presenter; XSEDE14, Atlanta, GA – July 18-21, 2014

“Advanced Visualization at Clemson University,” Booth Presentation, SC13, Denver, CO, November 17- 22, 2013

Tutorial: “A Beginner’s Guide to Scientific Visualization Using VisIt 2.6.0, IEEE Cluster13, Indianapolis, IN – September 2013
Tutorial: “A Beginner’s Guide to Visualization: Introduction to Visualization – Student Tutorial, XSEDE 2013, San Diego, CA – July 2013

Workshop: “Introduction to Scientific Visualization,” South Carolina Regional Cyberinfrastructure Symposium, Clemson University, SC – March 2013

Conferences – Poster Presentations
“Broadening Participation in Visualization,” Byrd, VL. Research in Equity and Sustained Participation in Engineering, Computing, and Technology (RESPECT 2015); STC Broadening Participation in the Computing Science. Accepted for poster presentation. Charlotte, NC (August 13-14, 2015)

“Broadening Participation through Collaborative Data Visualization,” Byrd, VL. Research in Equity and Sustained Participation in Engineering, Computing, and Technology (RESPECT 2015);  STC Broadening Participation in the Computing Science. Accepted for poster presentation. Charlotte, NC (August 13-14, 2105)

“Advancing the Frontiers of Interdisciplinary Research by Broadening Participation in Visualization,” Byrd, V. Gordon Research Conference on Visualization in Science & Education, August 02 – 07, 2015 Bates College, Lewiston, ME

 

 

Yingjie Chen

Journals

  1. Chen, V.Y., Qian, Z.C., and W.T.Lei (2016), "Designing Situational Awareness Information Display: Adopting Affordance to Amplify User Experience in Environmental Interaction Design", Informatics, MDPI, ISSN 2227-9709. Under major revision
  2. Xia, J., Hong, Y., Chen, Y.V., Qian, C.Z., Ebert, D., and W. Chen (2016),  "Visualizing Rank Time Series of Wikipedia Top Viewed Pages", IEEE Computer Graphics and Applications (CG&A), in press.
  3. Promann, M., Wei, S., Qian, C.Z., and Y.V. Chen (2016), "The Role of Aesthetics and Perception in Raising Situation Awareness: Lessons from SpringRain", International Journal of Human-Computer Interaction (IJHCI),  DOI: 10.1080/10447318.2016.1140951
  4. Qian, Z.C. and Y.V. Chen, (2015), “Communication and Exchange between Information Visualization and Industrial Design”,  ACM SIGDOC Communication Design Quarterly Review, Vol. 3 Issue 3, pp.40-48, doi=10.1145/2792989.2792995
  5. Qian, Z.C., and Y.V. Chen (2014), "Fluency of Visualizations: Linking Spatiotemporal Visualizations to Improve Cybersecurity Visual Analytics”, Security Informatics, Vol. 3, No. 6, New York, NY. ISSN: 2190-8532, 15 pages, DOI: 10.1186/s13388-014-0006-4.
  6. Chen, V.Y., Qian, C.Z., Woodbury, R.F. and J. Dill (2014). "Employing a Parametric Model for Analytic Provenance", ACM Transactions on Interactive Intelligent Systems (4)1, special issue of Interactive Computational Visual Analytics, ISSN: 2160-6455, ACM. 33 pages, doi=10.1145/2591510
  7. Qian, C.Z., V.Y. Chen, and P. Peng# (2014), “A Comparative Approach to Evaluate and Enhance Information Interaction Design in Visual Analytics Systems”, ACM SIGDOC Communication Design Quarterly Review, Vol. 2 Issue 3, pp.28-33, doi=10.1145/2644448.2644455
  8. Chen, V.Y., Razip, A.M., Ko, S., Qian, C.Z., and Ebert, D.S. (2013), “Multi-aspect visual analytics on large-scale high-dimensional cyber security data”, Information Visualization (2013).
  9. Qian, C.Z., R.F. Woodbury, and V.Y. Chen, (2010). “Design patterns to support collaborative parametric design”, International Journal of Design Sciences and Technology, Vol.17, No.1, pp. 57-75, ISSN: 1630-7267.
  10. Qian, C.Z., Chen, V.Y., & R.F. Woodbury. (2008). “Developing a Simple Repository to Support Authoring Learning Objects”, International Journal of Advanced Media and Communication, Vol. 2, No.2, pp. 154-173.

Refereed Conference Proceedings

  1. Dangeti, S., Chen, Y.V., and C. Zheng (2016). Comparing bare-hand-in-air Gesture and Object-in-hand Tangible User Interaction for Navigation of 3D Objects in Modeling. In Proceedings of the TEI '16: Tenth International Conference on Tangible, Embedded, and Embodied Interaction (TEI '16). ACM, New York, NY, USA, 417-421. DOI=http://dx.doi.org/10.1145/2839462.2856555
  2. Tang, H., Pan, C., Yu, B., Du, W., Wei, S., Li, M., Guo., C., Cheng, L., Hu, K., Zhang, R., Li, X., Chen, Y.V., Qian, Z.C,  and Y.M. Zhu (2015), "[COMM]gregater: A toolset for temporal communication patterns and dynamic network structure," in Visual Analytics Science and Technology (VAST), 2015 IEEE Conference on , vol., no., pp.173-174, 25-30 Oct. 2015, doi: 10.1109/VAST.2015.7347666
  3. Wei, S., Hu, K., Cheng, L., Tang,H., Du, W., Guo, C., Pan, C., Li, M., Yu, B., Li, X., Chen, Y.V., Qian, Z.C., and Y.M.Zhu (2015), "CrowdAnalyzer: A collaborative visual analytic system," in Visual Analytics Science and Technology (VAST), 2015 IEEE Conference on , vol., no., pp.177-178, 25-30 Oct. 2015
    doi: 10.1109/VAST.2015.7347668
  4. Wang, W. , Yang, B., and Y.V. Chen (2015),   “Finding Potential Cyberattacks through Visual Analytics-  A study on Server Redirection and Data Exfiltration”, IEEE Intelligence and Security Informatics (ISI) 2015,  Baltimore, Maryland.
  5. Wei, S., Chen, Y.V., McGraw, T., Ginther, A. (2015), “Computer vision aided lip movement correction to improve English pronunciation”, 122st ASEE Annual Conference and Exposition, June 14-17, Seattle, WA

  6. Wang, W. , Yang, B., and Y.V. Chen (2014),  “Detecting subtle port scans through characteristics based on interactive visualization”,  in proceedings of the 3rd annual conference on research in information technology RIIT’14,  October 15-18, Atlanta, Georgia. doi:10.1145/2656434.2656441

  7. Xia, J. , Zhao, J. , Sheeley, I. , Christopher, J. , Wang, Q. #, Guo, C. , Zhang, J., Chen, Y.V., Qian, Z.C., and D. Ebert, (2014), “AnnotatedTimeTree: Visualization and Annotation of News Text and Other Heterogeneous Document Collections”, in 2014 IEEE Conference on Visual Analytics Sciences and Technology (VAST), November 9-14, Paris, France.

  8. Guo, C., Xu, S.,  Yu, J. , Zhang, H. , Wang, Q. , Xia, J. , Zhang, J. , Chen, Y.V., Qian, Z.C., Chen, W., and D. Ebert, (2014), “Dodeca-Rings Map: Interactively Finding Patterns and Events in Large Geo-temporal Data”, in 2014 IEEE Conference on Visual Analytics Sciences and Technology (VAST),  November 9-14, Paris, France

  9. Zhang, J. , Afzal, S. , Breunig, D. , Xia, J. , Guo, C. , Ebert, D., Qian, Z.C., and Chen, Y.V., (2014), “Real-time Identification and Monitoring of Abnormal Events Based on Microblog and Emergency Call Data Using SMART”, in 2014 IEEE Conference on Visual Analytics Sciences and Technology (VAST), November 9-14, Paris, France

  10. Guo, C. , Xia, J., Yu, J. , Zhao, J. , Zhang, J. , Wang, Q. , Qian, Z.C., Chen, Y.V., and D. Ebert, (2014), “AnnotatedTimeTree, Dodeca-Rings Map & SMART: a Geo-temporal Analysis of Criminal Events”, in 2014 IEEE Conference on Visual Analytics Sciences and Technology, November 9-14, Paris, France.

  11. Chen, Y.V., & Qian, C.Z., (2014), “Enhance Creative Thinking by Collaborating with Designers”, In the 121st ASEE Annual Conference and Exposition, June 15-17, Indianapolis, IN, 12 pages.
  12. Guo, C. , Chen, Y.V., Miller, C.L., Hartman, N.W.,  Mueller, A.B., & Connolly, P.E., (2014),  “Information Visualization for Product Lifecycle Management (PLM) Data” , in the 121st ASEE Annual Conference and Exposition, June 15-17, Indianapolis, IN, 14 pages
  13. Chen, Y.V. and C.Z Qian (2013), "From when and what to where: Linking spatio-temporal visualizations in visual analytics", in 2012 IEEE Conference on Intelligence and Security Informatics (ISI).
  14. Promann, M. , Ma, Y. , Wei, S. , Lei, W. , Chang, J.S. #, Qian, C.Z., and Chen, Y. V. (2013), “SpringRain: an Ambient Information Display”, in 2013 IEEE Conference on Visual Analytics Sciences and Technology, Atlanta, GA, USA.
  15. Chang, J.S. , Lei, W. , Wei, S. , Promann, M. , Ma, Y. , Chen, Y.V., and Qian, C.Z., (2013), “SolarWheels: an Interactive Situation Awareness Visual Display for Large-scale Computer Networks”, in 2013 IEEE Conference on Visual Analytics Sciences and Technology, Atlanta, GA, USA.
  16. Wang, W.J. , Promann, M. , Yang, B.J., Chen, V.Y., “A real-time Network hosts visualization system”, in 2013 IEEE Conference on Visual Analytics Sciences and Technology, Atlanta, GA, USA.
  17. Chen, Y.V., & Qian, C.Z. (2013). From When and What to Where: Linking Spatio-Temporal Visualizations in Visual Analytics, in IEEE Intelligence and Security Informatics 2013, June 4-7, Seattle, WA, USA. PP.39-44, DOI 10.1109/ISI.2013.6578783
  18. Qian, C.Z., Visser, S., & Chen, V.Y. (2013). “Beyond the computer screen: applying information visualization in product design”, in IDSA 2013 International Conference and Education Symposium, Chicago, IL, USA, 8 pages
  19. Visser, S., and Qian, C.Z. and V.Y. Chen. (2013), “Breaking the Rules of Visual Perception”, in IDSA 2013 International Conference and Education Symposium, Aug 21-24, Chicago, IL, 8 pages
  20. Chen, Y.V., Razip, A.M., Ko, S., Qian, C.Z., and Ebert, D.S. (2012), “SemanticPrism: a Multi-aspect View of Large High-dimensional Data”, in 2012 IEEE Conference on Visual Analytics Sciences and Technology, Seattle, WA, USA
  21. Qian, C.Z. and Y.V. Chen. (2012), “When Simple Products are not Simple to Operate: Attaining Simplicity in Interaction Design”, in IDSA 2012 International Conference and Education Symposium, Aug 15, Boston, MA.
  22. Visser, S., Qian, C.Z. and Y.V. Chen. (2012), “What You can Get from 48 Hours: Time-sensitive Collaborative Design Experience”, in IDSA 2012 International Conference and Education Symposium, Aug 15, Boston, MA.
  23. Chen, Y.V., Qian, C.Z., and Zhang, L. (2011), “MobileAnalymator: Animating Data Changes on Mobile Devices”, in 2011 IEEE Conference on Visual Analytics Sciences and Technology, Oct 23-28, Providence, RI, USA.
  24. Qian, C.Z., Visser, S. and Y.V. Chen. (2011), “Integrating user experience research into industrial design education: interaction design program in Purdue”, in Proceedings of NCIIA 15th conference, Mar 24-26, Washington D.C.
  25. Chen, Y.V., Dunsmuir, D., Kadivar, N., Lee, E., Guenther, J., Jani, S.A., Dill, J., Shaw, C., Stone, M., Woodbury, R., and C.Z. Qian, (2010) “Interactive Demo: Using CZsaw to Analyze Entities in Collections”, in 2010 IEEE Conference on Visual Analytics Sciences and Technology, Oct 24-29, Salt Lake City, Utah, USA.
  26. Chen, Y.V., Dunsmuir, D., Alimadadi, S., Lee, E., Guenther, J., Dill, J., Qian, C.,  Shaw, C., Stone, M., and R.Woodbury, (2010) “CZSaw: Model based Interactive Analysis of Interwoven, Imprecise Narratives.”, in 2010 IEEE Conference on Visual Analytics Sciences and Technology, Oct 24-29, Salt Lake City, Utah, USA.
  27. Kadivar, N., Chen, Y.V., Dunsmuir, D., Lee, E., Qian, C.Z., Dill, J., Shaw, C. & R.F. Woodbury. (2009). “Capturing and Supporting the Analysis Process”, in IEEE VAST conference, Oct. 11-16, Atlantic City, NJ.
  28. Chen, Y.V., Qian, C.Z. & R.F. Woodbury. (2007). “Local Navigation Can Reveal Implicit Relations”. In processing of CAADFutures July 11-13, Sydney, Australia. pp. 403-416.
  29. Chen, Y.V., Qian, C.Z. & R.F. Woodbury. (2007). “Visualizing Collaborative Filtering in Digital Collections”, in IEEE Information Visualization 2007, July 4-6, Zurich, Switzerland, pp. 203-208.
  30. Chen, Y.V., Qian, C.Z. and R.F. Woodbury. (2007). “Developing a Simple Repository to Support Authoring Learning Objects”, Intelligent Interactive Learning Object Repositories (I2LOR) Conference, Nov 4-7 2007, Montreal, Canada.
  31. Qian, C.Z., Chen, Y.V. & R.F. Woodbury. (2007). “Participant Observation Can Discover Design Patterns in Parametric Modeling”, in ACADIA 2007: Expanding Bodies, Oct. 1-7, Halifax, Canada. pp. 230-241.
  32. Chen, Y.V., Qian, C.Z., and R.F. Woodbury. (2006). “NEAR: Visualizing Information Relations in Multimedia Repositories”, in Joint International Conference on Computing and Decision Making in Civil and Building Engineering 2006, Montreal, Canada.
  33. Qian, C.Z., Chen, Y.V. & R.F. Woodbury. (2006). “NEAR: Collaborative Filtering & Visualizing Information Relations in a Multimedia Repository”, in International Symposium on Smart Graphics 2006, pp.236-241.

 

Hazar Dib

Refereed Journal Articles

  1. Chen*#, Y., Dib, H. & Cox, R. (2014). A measurement model of building information modeling maturity. Journal of Construction Innovation: Information, Process, and Management. 14(2), 186-209. DOI:10.1108/CI-11-2012-0060
  2. Dib*, H., Adamo-Villani, N. & Garver+, S. (2014). An interactive virtual environment for learning differential leveling: Development and initial findings. Advances in Engineering Education (ASEE). 4(1):13, Winter 2014. Preview of issue available at: http://aee.asee.org/wp-content/uploads/vol04/issue01/papers/AEE-13- from_the_editor-cor.pdf
  3. Dib*, H. & Adamo-Villani, N. (2014). The Sustainability Challenge: A serious game to promote teaching and learning of sustainable building practice. JCCE - Journal of Computing in Civil Engineering (ASCE). Early view available at: http://ascelibrary.org/doi/abs/10.1061/(ASCE)CP.1943-5487.0000357
  4. Dib*, H., Adamo-Villani, N. & Garver+, S. (2014). Realistic versus schematic visualizations for learning surveying practices: a comparative study. International Journal of Information and Communication Technology Education (IJICTE), IGI Global. To appear in 10(2):38 June 2014.
  5. Adamo-Villani*, N. & Dib, H. (2014). Online Virtual Learning Environments: a Review of Two Projects. International Journal of Systems and Service-Oriented Engineering (IJSSOE), IGI Global, 4(1), 1-20. DOI:10.4018/ijssoe.2014010101
  6. Adamo-Villani*, N. & Dib, H. (2013). Evaluating technology-based educational interventions: a review of two projects. Journal of Educational Technology Systems (Baywood), 41(4), 295-317. DOI:10.2190/ET.41.4.b
  7. Nilforooshan*#, R., Adamo-Villani, N. & Dib, H. (2013). A study of the effects of computer animation on college students’ learning of “Leadership in Energy and Environmental Design – LEED”. EAI Endorsed Transactions on e-Learning, 13(3): e3. (http://www.eudl.eu/doi/10.4108/el.1.3.e3)
  8. Dib*, H., Adamo-Villani, N. & Issa Raja R. (2013). A GIS - based visual information model for building construction project management. International Journal of Construction Management (IJCM), 1(1), 1-18. Also available at Taylor & Francis Online DOI: 10.1080/15623599.2013.10773202
  9. Dib*, H. & Adamo-Villani, N. (2011). An innovative software application for Surveying Education. Journal of Computer Applications in Engineering Education. Wiley Publishing. DOI: 10.1002/cae.20580
  10. Dib*, H. & Adamo-Villani, N. (2011). An e-tool for undergraduate surveying education: design and evaluation. EAI Endorsed Transactions on e-Learning, 11(1): e5 (http://www.eudl.eu/doi/10.4108/icst.trans.eeel.2011.e5)

Refereed Conference Proceedings:

  1. Yu*#, J., Dib, H., & Adamo-Villani, N. (2014). Computer animation for learning building construction management: a comparative study of first person versus third person view. Proceedings of e-LEOT – 1st International Conference on e-Learning e- Education and Online Training, Bethesda, Maryland, September 2014. Springer
  2. Dib*, H., Adamo-Villani, N., & Garver#, S. (2014). An interactive virtual environment to improve undergraduate students’ competence in surveying mathematics. Proceedings of ICCCBE 2014, Orlando, FL, June 2014.
  3. Dib*, H., Chou, K., & Moaveni, S. (2014). An interactive steel connection teaching tool - A virtual structure. Proceedings of ICCCBE 2014, Orlando, FL, June 2014.
  4. Adamo-Villani, N., Dib, H., & Garver, S. (2013). (In Review) An Interactive Virtual Environment for Teaching “Triangulations and Coordinates Calculations” to Surveying Students. Proceedings of the 17th International Conference of Information Visualization IV13, 15-18 July 2013, London, UK.
  5. Dib, H., Adamo-Villani, N., & Garver, S. (2012). An Interactive Virtual Environment for Learning Differential Leveling. Proceedings of the 3rd World Conference on Information Technology, 14-16 November 2012, Barcelona, Spain
  6. Chen, Y., Dib, H., Cox, R. (2012) A Framework for Measuring Building Information Modeling Maturity based on Perception of Practitioners and Academics outside the USA. Proceedings of the 29th International Conference on Applications of IT in the AEC Industry, October 17-19, 2012. Beirut, Lebanon
  7. Koch, D., Dib, H. (2012). Construction Management Documentation using BIM. Proceedings of CIB International Conference of W055, Management of Construction: Research to Practice, 26-29 June 2012, Montreal, Canada.
  8. Chen, Y., Dib, H. (2012). A Framework for Measuring BIM Maturity. Proceedings of 14th International Conference on Computing in Civil and Building Engineering, June 27-29, 2012, Moscow, Russia.
  9. Chen, Y., Dib, H., Cox, R. (2012) A Modified Framework for Measuring Building Information Modeling Maturity based on Experts’ Perception. Proceedings of 2012 ASCE International Conference on Computing in Civil Engineering, June 17-20, 2012. Clearwater Beach, FL.
  10. Dib, H., Adamo-Villani, N., Nilforooshan#, R. (2012). A Serious Game for Learning the LEED Green Building Rating System. Proceedings of 2012 ASCE International Conference on Computing in Civil Engineering, June 17-20, 2012. Clearwater Beach, FL.
  11. Dib, H., Adamo-Villani, N., & Issa Raja R. (2011). A GIS-Based Integrated Information Model to Improve Building Construction Management: Design and Initial Evaluation. Proceedings of the 11th International Conference on Construction Applications of Virtual Reality, November 3 & 4, 2011, Bauhaus-Universitat Weimar, Germany.
  12. Chen, Y., & Dib, H. (2011). Modeling Information Behavior of Communication System supported by Building Information Modeling. Proceedings of 2nd International Conference on Construction and Project Management (IPEDR), vol.15 (2011). LACIST Press, Singapore.
  13. Chen, C., Dib, H., & Lasker, G. C. (2011). Benefits of implementing Building Information Modeling for healthcare facility Commissioning, Proceedings of 2011 ASCE International Workshop on Computing in Civil Engineering, June 19-22, 2011, Miami, FL, USA.
  14. Dib, H., & Adamo-Villani, N. (2011). An e-tool for assessing undergraduate students learning of surveying concepts and practices. Proceedings of 3rd International Conference on IT Revolutions, March 23-25, 2011, Cordoba, Spain.
  15. Dib, H., & Koch, D. (2010). Integration of curriculum between computer graphics technology (CGT) and Building construction management (BCM). Proceedings of  BIM-Related Academic Workshop, December 7-9, 2010, Washington DC, USA.
  16. Koch, D., & Dib, H. (2010). Integrating BIM into mechanical, electrical and plumbing (MEP) construction management curriculum. Proceedings of  BIM-Related Academic Workshop, December 7-9, 2010, Washington DC, USA.
  17. Dib, H., & Adamo-Villani, N. (2010). Assessment of serious gaming and Virtual Reality in the learning of the fundamentals of Surveying and Construction Layout courses. Proceedings of CIB W78 27th International conference on Applications of IT in the AEC Industry & Accelerating BIM Research Workshop, November 16-19, 2010, Cairo, Egypt.
  18. Dib, H., Chen#, U., & Cory, C. (2010). Using an Object Oriented Database Approach to enable students in learning industry practices. Proceedings of CIB W78 27th International conference on Applications of IT in the AEC Industry & Accelerating BIM Research Workshop, November 16-19, 2010, Cairo, Egypt.
  19. Howard, E., Cory, C. & Dib, H. (2010). Impact of gaming application use in construction engineering education. Proceedings of Computing in Civil and Building Engineering International Conference, June 30 – July 2, 2010 Nottingham, UK, Nottingham University Press, Paper 298, p. 595, ISBN 978-1-907284-60-1.
  20. Cory, C., Dib, H., Howard#, E. & Hall#, C. (2010). Evolution of a construction graphics course for engineering education. Proceedings of Computing in Civil and Building Engineering International Conference, June 30-July 2, 2010 Nottingham, UK, Nottingham University Press, Paper 281, p. 561, ISBN 978-1-907284-60-1.
  21. Dib, H., Adamo-Villani, N., Crawford, W. & Keith, D. (2010). Virtual Reality for learning construction surveying. Proceedings of Computing in Civil and Building Engineering International Conference, June 30- July 2, 2010 Nottingham, UK, Nottingham University Press, Paper 293, p. 585, ISBN 978-1-907284-60-1.
  22. Dib, H., Issa, R., & Flood I. (2007). Space availability approach to planning and staffing construction activities. Proceedings of ASCE Construction Research Congress, Grand Bahama Island, Bahamas, May 6-8, 2007.
  23. Dib, H., Issa, R. A., & Cox, R. (2006). Visual information access and management for life cycle project management. Proceedings of Joint CIB W78, W102, ICCCBE, ICCC, and DMUCE International Conference on Computing and Decision Making in Civil and Building Engineering, Montreal, Canada, 14-16 June. http://itc.scix.net/cgi-bin/works/Show?w78-2006-tf383

Workshops

  1. Dib H., (2012). Workshop leader on Building Information Modeling/Management (BIM). Construction Research Congress. May 21, 2012. Purdue University, IN. http://rebar.ecn.purdue.edu/crc2012/workshop.htm
  2. Chen, Y., Dib, H., Cox, R. (2012) Investigating and Measuring Building Information Modeling Maturity. Proceedings of EcoBuild America, December 3-7, 2012. Washington, DC
  3. 2010) Dib was part of a US delegation of distinguished Civil Engineering professors from peer institutions funded by the National Science Foundation (NSF) to organize and deliver a workshop in Abuja - Nigeria to promote Innovative Design Approaches to Sustainable Buildings.
  4. BIM presentation at Ecobuild America an AEC sciences and technology conference (2009). Code: W102, Title: Higher Education Transformation, Room Number: 147B, Day: Tuesday, Date: 12/08/2009, Time: 0900 – 1200

Presentations Posters and Abstracts:

  1. Dib, H. (2013). Collaborative Research: An Interactive Steel Connection Teaching Tool: A Virtual Structure. Proceedings of the National Sciences Foundation (NSF) Transforming Undergraduate Education in Science, Technology, Engineering and Mathematics (TUES STEM) Principal Investigator (PI) conference, January 23-25, 2013, Washington DC (Project # 1140468)
  2. Dib*, H. (2013). Collaborative Research: An Interactive Steel Connection Teaching Tool: A Virtual Structure. Proceedings of the National Sciences Foundation (NSF)
    Transforming Undergraduate Education in Science, Technology, Engineering and Mathematics (TUES STEM) Principal Investigator (PI) conference, January 23-25,
    2013, Washington DC (Project # 1140468 – abstract and poster)
  3. Li*#, M., Dib, H., & Alter, K. (2011). Utilize 4D simulation to visualize details in passive house design. ASCE International Workshop on Computing in Civil
    Engineering, June 19-22, 2011, Miami, FL, USA.
  4. Dib* H., Adamo-Villani, N., & Oania, M. (2011). The VELS: Virtual Learning Environment for Learning Surveying. College of Technology Convocation. Poster.
  5. Demir*#, I., Dib, H. (2011). 3D Process Quality Analyzer. College of Technology Convocation. Poster.
  6. Chen*#, U., & Dib, H. (2011). BIM’s impact on efficiency measures of information communication based on the three-dimensional morphology of system engineering.
    ASCE International Workshop on Computing in Civil Engineering, June 19-22, 2011, Miami, FL, USA.
  7. Dib*, H., Issa, R., & Cox, R. (2006). Visual information access and management for life cycle project management. UF Graduate Student Council Research Forum, March 29, 2006. (Poster)

External Grants:

  1. National Sciences Foundation – Transforming Undergraduate Education (NSFTUES). Grant Title: VELS: An interactive Virtual Environment for Learning Surveying. Duration of funding: 2012-2014 Total amount of award: $199,999. Role: PI
  2. National Sciences Foundation – Transforming Undergraduate Education (NSFTUES). Grant Title: Collaborative Research: An interactive Steel Connection Teaching Tool - A Virtual structure. Duration of funding: 2012-2014 Total amount of award: $198,706. Role: PI
  3. Industry grant: Capital equipment grant from Holder Construction Company. Duration of funding: 2013-2017 Total amount of award: $100,000. Role: Co-PI (50%, C. Cory PI)

Internal Grants:

  1. Purdue Research Foundation (PRF) Summer Faculty Grant. Grant Title: The Sustainability Challenge: a "multi-dimensional" serious game to promote learning of sustainable building principles and practices. Duration of funding: 2013. Total amount of award: $8000. Role: PI 
  2. Purdue Research Foundation (PRF) Summer Faculty Grant. Grant Title: A novel System for Automated Construction Process Supervision. Duration of funding: 2011. Total amount of award: $8000. Role: PI
  3. Purdue Research Foundation (PRF) Summer Faculty Grant. Grant Title: International Travel Grant Duration of award: 2011. Total amount of ward: $1000. Role: PI
Esteban Garcia Bravo
  1. Garcia Bravo, E. (2015). “Photo and Palette: Early Pixel-Based Computer Art.” In Data Drift: Archiving Media and Data Art in the 21st Century. Eds. Smite, R., Smits, R., Manovich, E. RIXC, LiepU MPLab
  2. Garcia Bravo, E. (2015). Cybernethisms: Aldo Giorgini’s computer art legacy. West Lafayette, IN: Purdue University Press 
  3. Burbano, A., García Bravo, E. (2015). “Breaking the Navajo Code with Bill Toledo”. In: Pau Alsina and Ana Rodriguez Granell (coord.). “Art Matters II”. Artnodes. Nº. 16
  4. Garcia Bravo, E., Garcia, J. A. (2015). Yturralde: Impossible figure generator. Leonardo Journal of the International Society for the Arts, Sciences and Technology, 48(4), pp.366-374. ACM SIGGRAPH 2015
  5. Garcia Bravo, E., Garcia, J. A., Zernack, A. (2015). XV: Reactive Spaces. BCS: The Chartered Institute for IT, Electronic Workshops in Computing (eWiC) Electronic Visualisation and the Arts (EVA 2015)(2015)
  6. Garcia, E., & Whittinghill, D. (2011). Art and code: The aesthetic legacy of Aldo Giorgini. Leonardo Journal of the International Society for the Arts, Sciences and Technology, 44(4), pp.309-316. ACM SIGGRAPH 2011

Conference Proceedings

 

  1. Garcia Bravo, E., McGraw, T. E. (2015). Ideal Flow: The Art and Science of Early Computational Models by Aldo Giorgini. In Bebis, G. et al. (Eds.) Advances in Visual Computing: 11th International Symposium of Visual Computing (ISVC’15). Las Vegas, NV: Springer
  2. Garcia, E. & Restrepo, I. (2014). 2467/3970: A shortcut to connect Purdue University (USA) and Universidad de Antioquia (Colombia) in an interdisciplinary experience between art and technology. Twentieth International Symposium of Electronic Arts (ISEA), Dubai, UAE
  3. Garcia, E. (2013, June). Stretch: An early software art framework by Aldo Giorgini. Paper presented at the nineteenth International Symposium of Electronic Arts (ISEA), Sydney, Australia.
  4. Burbano, A. & Garcia, E. (2013). Re:imag(in)ing Indigenous Media Art Histories. Panel presented at the nineteenth International Symposium of Electronic Arts (ISEA), Sydney, Australia.
  5. Garcia, E. (2012). Radio Chigüiro: Making community radio. Paper presented at the eighteenth International Symposium of Electronic Arts (ISEA), Albuquerque, New Mexico

Other Publications

  1. Garcia, E. & A.Nemec (2010). Strangely Funny in Aspect-EZ: The Chronicle of New Media Art (Volume I). [DVD]
Ronald Glotzbach

Relevant Publications and Presentations

  1. Glotzbach*, R. J., & Kocur, L. A. (2011). Work in Progress: Evaluation and Feedback for Web Programming Curriculum. Proceedings of the 41st annual Frontiers in Education Conference (FIE 2011).
  2. Glotzbach*, R. J., Kocur, L. A., Mohler, J. L., & Morales, C. R. (2011). Work in Progress: A Health Information Technology Centralized Web Application. Proceedings of the 41st annual Frontiers in Education Conference (FIE 2011).
  3. Kocur*, L. A., Glotzbach, R. J., Schulze, D. G., & Miller, C. C. (2011). Work in Progress: Development and Integration of an Online Soil Mapping Web Application. Proceedings of the 41st annual Frontiers in Education Conference (FIE 2011).
  4. Kocur*, L. A., Glotzbach, R. J., Schulze, D. G., & Miller, C. C. (2011). Usability of educational soil mapping software. Proceedings of the 22nd international conference of the Society for Information Technology and Teacher Education (SITE 2011).
  5. Schulze*, D. G., Owens, P. R., Mitzman, S., Snyder, L. U., Van Scoyoc, G. E., Graveel, J. G., Steinhardt, G. C., Miller, C. C., Bracke, M. S., Glotzbach, R. J., Kocur, L. A., Benes, B., Neely, T., Wiggington, M., & Nielson, R. (2010). Isee - Integrating spatial educational experiences into soil, crop, and environmental sciences. Proceedings of the 19th World Congress of Soil Science.
  6. Schulze*, D. G., Miller, C. C., Glotzbach, R. J., & Kocur, L. A. (2010). Isee: Integrating Spatial Educational Experiences. Proceedings of the 2010 Indiana GIS Conference.
  7. Glotzbach*, R. J., Mohler, J. L., & Radwan†, J. E. (2009). Really Simple Syndication (RSS): An educational approach. Journal of Interactive Media in Education.
  8. Glotzbach*, R. J., Burton, T. L., Co, B. (2008). Online Instructor Evaluations: A Web-Based Application. Journal of Industrial Technology, 24(4), 1-15.
  9. Glotzbach*, R. J., Mordkovich, D. A., Radwan, J. E. (2008). Syndicated RSS Feeds for Course Information Distribution. Journal of Information Technology Education, 7, 163-183.
  10. Glotzbach*, R.J., & Kellogg, L.D. (2008). The Usefulness and Effectiveness of PDA Integration into the Classroom. Proceedings of the International Conference on Engineering and Technology Education 2008 (INTERTECH'2008).
  11. Glotzbach*, R.J., Mohler, J.L., Mordkovich, D.A., & Radwan, J.E. (2008). RSS Research in Education. Proceedings of the International Conference on Engineering and Technology Education 2008 (INTERTECH'2008).
  12. Glotzbach*, R.J., Burton, T.L., Ealy, J., Troyer, E., Macy, C., Alley, C. (2007). Capstone Project: Development of a Computer Graphics Technology Conference. Proceedings of the 37th annual ASEE/IEEE Frontiers in Education Conference (FIE 2007).
  13. Glotzbach*, R.J., Mordkovich, D., Kellogg, L., Co, B. (2007). Gap Analysis Visualization Application for Geographic Representation of Statistical Data. Proceedings of the 37th annual ASEE/IEEE Frontiers in Education Conference (FIE 2007).
  14. Glotzbach*, R.J., Kellogg, L. (2007). Information Technology Project Management: An Industry Partnership. Proceedings of the 37th annual ASEE/IEEE Frontiers in Education Conference (FIE 2007).
  15. Glotzbach*, R.J., Mohler, J.L., Radwan, J.E. (2007). RSS as a course information delivery method. Proceedings of the ACM SIGGRAPH 2007 Annual Conference and Exposition.
  16. Kim*, H., Mohler, J.L., & Glotzbach, R.J. (2007). Accessibility and Learning: Using PDAs for Declarative Learning. Proceedings of the 2007 annual Teaching and Learning Technologies Conference.
  17. Glotzbach*, R.J., Burton, T.L., Co, B., Middleton, R., Stremke, R. (2007). A Web-Based Application for Online Instructor Evaluations. Proceedings of the 18th international conference of the Society for Information Technology and Teacher Education.
  18. Glotzbach*, R.J., Mohler, J.L., Radwan, J.E. (2007). The usefulness of RSS in higher education. Proceedings of the 18th international conference of the Society for Information Technology and Teacher Education.
  19. Glotzbach*, R.J., & Maicher, K.R. (2007). Industry Partnerships in Education. Proceedings of the 5th annual Hawaii International Conference on Education.
  20. Maicher*, K.R. & Glotzbach, R.J. (2007). Digital Master: A Supplementary Online Application for Teaching Applied Computer Graphics. Proceedings of the 5th annual Hawaii International Conference on Education.
  21. Glotzbach*, R.J. (2006). Mobile Media for Large-Scale Sporting Events. Proceedings of the ACM SIGGRAPH 2006 Annual Conference and Exposition.
  22. Glotzbach*, R.J., & Mohler, J.L. (2006). The utility of RSS for the classroom. Proceedings of ED-MEDIA 2006 annual World Conference on Educational Multimedia, Hypermedia, and Telecommunications.
  23. Glotzbach*, R.J., & Maicher, K.R. (2006). Using Industry Partnerships in Academia as an Instructor-Learner Paradigm. Proceedings of ED-MEDIA 2006 annual World Conference on Educational Multimedia, Hypermedia, and Telecommunications.
  24. Glotzbach*, R.J., Bingham, N.S., Ren, M., & Rogers, T.J. (2006). E-Stadium: Mobile infotainment applications. Proceedings of the 10th World Multi-Conference on Systemics, Cybernetics, and Informatics.
  25. Glotzbach*, R.J., Bingham, N.S., Ren, M., & Mordkovich, D. (2006). E-Stadium: Real-time game statistics, highlights, and entertainment. Proceedings of the American Society for Engineering Education Annual Conference and Exposition.
  26. Glotzbach*, R.J., Coyle, E.J., Bingham, N.S. (2005). e-Stadium: wireless football infotainment applications. Proceedings of the ACM SIGGRAPH 2005 Annual Conference and Exposition.
  27. Xu*, H., Glotzbach, R.J., Hartman, N.W. (2005). A Complete Strategy for Web Application Security. Proceedings of the American Society for Engineering Education Annual Conference and Exposition.
  28. Mohler*, J.L., Glotzbach, R.J., & Kothary, N.B. (2003). A quantitative approach to web usability and interface design. Scientific Journal on Applied Information Technology, 3(3).
  29. Mohler*, J.L., Kothary, N.B., & Glotzbach, R.J. (2003). An investigation of best practices for interactive content controls. Proceedings of the ACM SIGGRAPH 2003 Annual Conference and Exposition.
  30. Glotzbach*, R.J., & Kothary, N.B. (2003). Usability & human behavior analysis through real-time performance data. Proceedings of the ACM SIGGRAPH 2003 Annual Conference and Exposition.
  31. Mohler*, J.L., Glotzbach, R.J., & Kothary, N.B. (2003). A quantitative approach to web usability and interface design. Proceedings of the VIEWDET 2003 Vienna International Conference on eLearning, eMedicine, eSupport.
  32. Glotzbach*, R.J. (2003). The Digital Enterprise. Symposium presented at the Purdue University / WSHiSM Summer Program 2003, West Lafayette, IN.
  33. Glotzbach*, R.J., & Morales, C.R. (2003). Web-enabling software for real-time online automated services. Proceedings of the American Society for Engineering Education Annual Conference and Exposition.
  34. Glotzbach*, R.J. (2003). The database imperative in computer graphics projects. Proceedings of the American Society for Engineering Education Annual Conference and Exposition.
  35. Morales*, C.R., Glotzbach, R.J., & Gonzalez, D. (2003). Implementation of a multi-user on-line geometry collaboration tool. Proceedings of the American Society for Engineering Education Annual Conference and Exposition.
  36. Morales*, C.R., Miller, C.D., & Glotzbach, R.J. (2003). Measuring the effectiveness of a custom distance-learning system through biofeedback and learner-performance metrics. Proceedings of the American Society for Engineering Education Annual Conference and Exposition.
  37. Glotzbach*, R.J. (2003). Integrating Multimedia into a Web Site. Symposium presented at the ICE Conference 2003, Indianapolis, IN.
  38. Glotzbach*, R.J. (2002). The Importance and Purpose of Programming in Computer Graphics Technology. Paper presented at the meeting of the Engineering Design Graphics Division, Indianapolis, IN.
  39. Glotzbach*, R.J. (2002). General Motors and Supplier Collaborative Development Portal Using CAE and Java Technology. Symposium presented at the SNUG Conference 2002, Detroit, MI.
Colin Gray

Journal Publications

  1. Gray, C. M., Seifert, C. M., Yilmaz, S., Daly, S. R., & Gonzalez, R. (accepted). What is the Content of “Design Thinking”? Design Heuristics as Conceptual Repertoire. International Journal of Engineering Education, 32(X), XX-XX [Selected for publication in a special issue from Mudd Design Workshop IX].
  2. Gray, C. M. & Howard, C. D. (2015). Reflection on Designerly Talk in Non-Pedagogical Social Spaces. Journal of Learning Design: 10th Anniversary Issue, 8(3), 143-164. http://dx.doi.org/10.5204/jld.v8i3.259 [reflection with republished version of Gray & Howard (2014)]

  3. Gray, C. M., Dagli, C., Demiral-Uzan, M., Ergulec, F., Tan, V., Altuwaijri, A., Gyabak, K., Hilligoss, M., Kizilboga, R., Tomita, K., & Boling, E. (2015). Judgment and Instructional Design: How ID Practitioners Work in Practice. Performance Improvement Quarterly, 28(3), 25-49. http://dx.doi.org/10.1002/piq.21198
  4. Boling, E., & Gray, C. M. (2014). Design: The topic that should not be closed. TechTrends, 58(6), 17-19. http://dx.doi.org/10.1007/s11528-014-0798-6

  5. Boling, E., Gray, C. M., Modell, M. G., Altuwaijri, A., & Jung, J. (2014). Learners Interpreting Instructional Images: Meaning-making and Decision-making Strategies. Journal of Visual Literacy, 33(2), 27-51.

  6. Gray, C. M. & Howard, C. D. (2014). Designerly Talk in Non-Pedagogical Social Spaces. Journal of Learning Design, 7(1), 40-58.

  7. Howard, C. D., & Gray, C. M. (2014). Introduction to the Special Issue on Historic Design Cases. In Gray, C. M. & Howard, C. D. (Eds.) International Journal of Designs for Learning [Special Issue on Historic Design Cases], 5(2), i-iv. 

  8. Gray, C. M. & Siegel, M. A. (2014). Sketching Design Thinking: Representations of Design in Education and Practice. Design and Technology Education, 19(1), 48-61. [Selected for publication in a special issue from DRS // CUMULUS 2013].

  9. Gray, C. M. (2013). Factors That Shape Design Thinking. Design and Technology Education, 18(3), 8-20.

  10. Gray, C. M. (2013). Informal Peer Critique and the Negotiation of Habitus in a Design Studio. Art, Design & Communication in Higher Education, 12(2), 195-209. http://dx.doi.org/10.1386/adch.12.2.195_1 [Selected for publication in a special issue from DRS // CUMULUS 2013].

  11. Gray, C. M., Jung, J., Watson, C., Jia, X., & Frick, T. W. (2012). Models and Design Judgment: Conflicting Perspectives on Redesigning a Doctoral Readings Course. International Journal of Designs for Learning, 3(1), 27-38.

  12. Modell, M. G., Gray, C. M. (2011). Searching for Personal Territory in a Human-Computer Interaction Design Studio. Journal for Education in the Built Environment, 6(2), 54-78.

Conference Papers

  1. Gray, C. M. (accepted). “It’s More of a Mindset Than a Method”: UX Practitioners’ Conception of Design Methods. In CHI’16: Proceedings of the 2016 CHI Conference on Human Factors in Computing Systems (pp. xxxx-xxxx). New York, NY: ACM Press. http://dx.doi.org/10.1145/2858036.2858410
  2. Gray, C. M., Toombs, A. L., & McKay, C. (accepted). Meaning Reconstruction as an Approach to Analyze Critical Dimensions of HCI Research. In CHI EA ’16: CHI’16 Extended Abstracts on Human Factors in Computing Systems (pp. xxxx-xxxx). New York, NY: ACM Press. http://dx.doi.org/10.1145/2851581.2892571

  3. Gray, C. M., Yilmaz, S., Daly, S., Seifert, C. M., & Gonzalez, R. (2015, August). Creativity ‘Misrules’: First Year Engineering Students’ Production and Perception of Creativity in Design Ideas. In ASME 2015 International Design Engineering Technical Conferences (IDETC); 12th International Conference on Design Education (DEC). New York, NY: ASME.
  4. Gray, C. M., Yilmaz, S., Daly, S., Seifert, C. M., & Gonzalez, R. (2015, July). Supporting Idea Generation Through Functional Decomposition: An Alternative Framing For Design Heuristics. In 2015 International Conference on Engineering Design. Milan, IT: The Design Society.
  5. Boling, E., Gray, C. M., & Smith, K. M. (2015, June). Studio Teaching in the Low-Precedent Context of Instructional Design. In LearnxDesign: The 3rd International Conference for Design Education Researchers and PreK-16 Design Educators (pp. 1417-1431). Chicago, IL: School of the Art Institute of Chicago.
  6. Gray, C. M., & Howard, C. D. (2015, June). “Why are they not responding to critique?”: A student-centered construction of the crit. In LearnxDesign: The 3rd International Conference for Design Education Researchers and PreK-16 Design Educators (pp. 1680-1700). Chicago, IL: School of the Art Institute of Chicago.
  7. Gray, C. M., Yilmaz, S., Daly, S., Seifert, C. M., & Gonzalez, R. (2015, June). What Problem Are We Solving? Encouraging Idea Generation and Effective Team Communication. In LearnxDesign: The 3rd International Conference for Design Education Researchers and PreK-16 Design Educators (pp. 308-329). Chicago, IL: School of the Art Institute of Chicago.
  8. Gray, C. M., Yilmaz, S., Daly, S. R., Seifert, C. M., & Gonzalez, R. (2015, June). Idea Generation Through Empathy: Reimagining the ‘Cognitive Walkthrough’. In Proceedings of the ASEE Annual Conference, Design in Engineering Education Division. Washington, DC: ASEE.
  9. Yilmaz, S., Daly, S. R., Seifert, C. M., Gonzalez, R., & Gray, C. M. (2015, June). Expanding evidence-based pedagogy with Design Heuristics. In Proceedings of the ASEE Annual Conference, NSF Grantees Poster Session. Washington, DC: ASEE.
  10. Gray, C. M., Seifert, C. M., Yilmaz, S., Daly, S., & Gonzalez, R. (2015, May). What is the Content of “Design Thinking”? Design Heuristics as Conceptual Repertoire. In Proceedings of the Harvey Mudd Design Workshop IX: Design Thinking in Design Education (pp. 19-25). Claremont, CA: Harvey Mudd College.
  11. Gray, C. M., Toombs, A., & Gross, S. (2015, April). Flow of Competency in UX Design Practice. In CHI’15: Proceedings of the 2015 CHI Conference on Human Factors in Computing Systems (pp. 3285-3294). New York, NY: ACM Press. [Awarded Best of CHI Honorable Mention, top 5%]http://dx.doi.org/10.1145/2702123.2702579
  12. Gray, C. M., & Howard, C. D. (2014, October). Normativity in Design Communication: Inscribing Design Values in Designed Artifacts. In DTRS’10: 10th annual Design Thinking Research Symposium. West Lafayette, IN: Purdue University.
  13. Howard, C. D., & Gray, C. M. (2014, October). Learner v. Expert Design Talk: A Content Analysis of the Discourse of Designerly Talk. In DTRS’10: 10th annual Design Thinking Research Symposium. West Lafayette, IN: Purdue University.
  14. Gray, C. M., Stolterman, E., & Siegel, M. A. (2014, June). Reprioritizing the Relationship Between HCI Research and Practice: Bubble-Up and Trickle-Down Effects. In DIS’14: Proceedings of the 2014 CHI Conference on Designing Interactive Systems (pp.725-734). New York, NY: ACM Press. [Awarded Best Paper, top 1%]. http://dx.doi.org/10.1145/2598510.2598595
  15. Gray, C. M. (2014, June). Locating the Emerging Design Identity of Students Through Visual and Textual Reflection. In Proceedings of the Design Research Society. Umeå, Sweden.
  16. Gray, C. M. (2014, April). Evolution of Design Competence in UX Practice. In CHI’14: Proceedings of the 2014 CHI Conference on Human Factors in Computing Systems (pp. 1645-1654). New York, NY: ACM Press. http://dx.doi.org/10.1145/2556288.2557264
  17. Gray, C. M. (2013, November). Emergent Critique in Informal Design Talk: Reflections of Surface, Pedagogical, and Epistemological Features in an HCI Studio. In Critique 2013: An International Conference Reflecting On Creative Practice in Art, Architecture, and Design (pp. 341-355). Adelaide, AU: The University of South Australia.
  18. Gray, C. M. & Howard, C. D. (2013, November). Expectations of Reciprocity? An Analysis of Critique in Facebook Posts by Student Designers. In Critique 2013: An International Conference Reflecting On Creative Practice in Art, Architecture, and Design (pp. 381-395). Adelaide, AU: The University of South Australia.
  19. Gray, C. M. (2013, June). Discursive Structures of Informal Critique in an HCI Design Studio. In Nordes 2013: Experiments in Design Research (pp. 110-118). Copenhagen, DK/Malmö, SE: The Royal Danish Academy of Fine Arts, Schools Architecture, Design and Conservation.
  20. Gray, C. M. (2013, May). Informal Peer Critique and the Negotiation of Habitus in a Design Studio. In DRS // CUMULUS 2013: 2nd International Conference for Design Education Researchers (pp. 702-714). Oslo, NO: HiOA. [Awarded ECT Foundation Qualitative Inquiry Award].
  21. Gray, C. M. & Siegel, M. A. (2013, May). Sketching Design Thinking: Representations of Design in Education and Practice. In DRS // CUMULUS 2013: 2nd International Conference for Design Education Researchers (pp. 2007-2031). Oslo, NO: HiOA.

Book Chapters

  1. Gray, C. M.  (forthcoming). Emergent Views of Studio. In E. Boling, R. A. Schwier, C. M. Gray, K. M. Smith, & K. Campbell  (Eds.) Studio Teaching in Higher Education: Selected Design Cases. New York, NY: Routledge.

  2. Gray, C. M., & Smith, K. M.  (forthcoming). Critical Views of Studio Education. In E. Boling, R. A. Schwier, C. M. Gray, K. M. Smith, & K. Campbell (Eds.) Studio Teaching in Higher Education: Selected Design Cases. New York, NY: Routledge.

  3. Gray, C. M., & Howard, C. D. (2015). Normativity Concerns, Avoided: Instructional Barriers in Designing for Social Change. In R. S. Adams, P. Buzzanell, & J. A. Siddiqui (Eds.) Analyzing Design Review Conversations (pp. 241-260). West Lafayette, IN: Purdue University Press.

  4. Boling, E., & Gray, C. M. (2015). Designerly Tools, Sketching, and Instructional Designers and the Guarantors of Design. In B. Hokanson, G. Clinton, & M. Tracey (Eds.) The Design of Learning Experience: Creating the Future of Educational Technology (pp. 109-126). Switzerland: Springer. http://dx.doi.org/10.1007/978-3-319-16504-2_8

  5. Gray, C. M. (2015). Critiquing the Role of the Learner and Context in Aesthetic Learning Experiences. In B. Hokanson, G. Clinton, & M. Tracey (Eds.) The Design of Learning Experience: Creating the Future of Educational Technology (pp. 199-213). Switzerland: Springer. http://dx.doi.org/10.1007/978-3-319-16504-2_14

Nathan Hartman

Publications – Textbooks

*Bertoline, G.R., *Wiebe, E.N., *Hartman, N.W., & *Ross, W.A. (2011). Fundamentals of Graphics Communication (6th ed.). McGraw-Hill: Dubuque, IA. ISBN: 978-0-07-352263-0

*Bertoline, G.R., *Wiebe, E.N., *Hartman, N.W., & *Ross, W.A. (2009). Technical Graphics Communication (4th ed.). McGraw-Hill: Boston, MA.
ISBN: 978-0-07-312837-5

Publications – Journals

1. *Fielding, E., McCardle, J.R., Eynard, B., Hartman, N.W., Fraser, A. (2014). PLM in design and engineering education: International perspectives. Concurrent Engineering: Research and Applications. DOI: 10.1177/1063293X13520316
2. #Waldenmeyer, K. & Hartman, N.W. (2013). Small and medium Enterprises and their views of product data management tools. Journal of Technology Studies, 39 (1), http://scholar.lib.vt.edu/ejournals/JOTS/v39/v39n1/waldenmeyer.html

3. *Jovanovic, V. & *Hartman, N.W. (2013). Web-based virtual learning for digital manufacturing fundamentals for automotive workforce training. International Journal of Continuing Engineering Education and Life-Long Learning, 23 (3/4), 300-310. DOI: 10.1504/IJCEELL.2013.055403
4. #Lowe, A. & *Hartman, N.W. (2011). A case study in CAD design automation. Journal of Technology Studies, 37 (1), 2-9.

5. Lubell, J., Hartman, N.W., & Cheney, D. (2011). Model-based engineering standardization and validation. NISTIR 7796. National Institute of Standards and Technology. http://www.nist.gov/manuscript-publication-search.cfm?pub_id=908106
6. *Hartman, N.W., *Sarapin, M.I., *Bertoline, G.R., #Sarapin, S. H. (2009). Examining the nature of technology graduate education. Journal of Technology Studies, 35 (1), 76-82.

7. Hartman, N.W. (2009). 3D neutral graphics formats for visualization and data exchange. Journal of Applied Science and Engineering Technology, 3 (2009). http://library.rit.edu/oajournals/index.php/jaset/article/view/234

8. #Waldenmeyer, K. & *Hartman, N.W. (2009). Standard features and their impact on 3D engineering graphics. The Engineering Design Graphics Journal, 73 (2), 23-29.

9. #Waldenmeyer, K. & *Hartman, N.W. (2009). Multiple CAD formats in a single product data management system: A case study. Journal of Industrial Technology, 25 (3). http://library.rit.edu/oajournals/index.php/jaset/article/view/234

10. +Hudecki, A., *Hartman, N.W., Miller, J., Coster, M., & Layman, K. (2008). Development of turbine blade generator using US NX 2.0. The Technology Interface Journal, 9 (1). ISSN: 1523-9926. http://technologyinterface.nmsu.edu/

11. *Hartman, N.W. & Miller, C.L. (2006). Examining industry perspectives related to legacy data and technology toolset implementation. The Engineering Design Graphics Journal, 70 (3), 13-22.

12. Hartman, N.W. (2006). Implementing surface modeling into engineering design graphics curricula: Is there room for more than just solids? The Engineering Design Graphics Journal, 70 (1), 16-22.

13. *Hartman, N.W. & *Branoff, T.J. (2005). Learning theories: Applications for instruction in constraint-based solid modeling and other engineering graphics topics. The Engineering Design Graphics Journal, 69 (2), 6-15.

14. Hartman, N.W. (2005). Defining expertise in the use of constraint-based CAD tools by examining practicing professionals. The Engineering Design Graphics Journal, 69 (1), 6-15.

15. Hartman, N.W. (2004). The development of expertise in the use of constraint-based CAD tools: Examining practicing professionals. The Engineering Design Graphics Journal, 68 (2), 14-25.

16. *Wiebe, E.N., *Branoff, T.J., & *Hartman, N.W. (2004). Teaching geometry through dynamic modeling in introductory engineering graphics. The Engineering Design Graphics Journal, 67 (2), 12-20.

17. *Branoff, T. J., *Hartman, N. W., & *Wiebe, E. N. (2002). Constraint-based, three-dimensional solid modeling in an introductory engineering graphics course: Re-examining the curriculum. The Engineering Design Graphics Journal, 66 (1), 5-10.

18. *Branoff, T. J., *Hartman, N. W. & *Wiebe, E. N. (2002). Constraint-based, solid modeling: What do employers want our students to know? The Engineering Design Graphics Journal, 67 (1), 6-11.

19. *Ross, W.A. &  Hartman, N. W. (1997). Engineering animation: A corporate case study.  The Engineering Design Graphics Journal, 62 (1), 4-8.

Presentations and Conference Proceedings

1. Hartman, N.W., Rosche, P., & Fischer, K.L. (2013). Preparing the future workforce to be effective in the model based enterprise (MBE). Proceedings of the 3D Collaboration and Interoperability Congress, May 21-23, 2013, Colorado Springs, CO, USA.
2. Hartman, N., & Ropp, T. (2013). Examining the use of model-based work instructions in the aviation maintenance environment. Proceedings of the 10th International Conference on Product Lifecycle Management, PLM13, 8th - 10th July 2013 in Nantes, France.
3. Hartman, N.W., Rosche, P., & Fischer, K.L. (2012). Examining the role of collaborative formats in product lifecycle workflows. Proceedings of the 9th International Product Lifecycle Management Conference, Montreal, Canada, July 9-12, 2012.

4. Hartman, N.W., Rosche, P., & Fischer, K.L., (2012). Successfully engaging small and medium enterprises (SMEs). Proceedings of 3D Collaboration & Interoperability Congress, Denver, CO, May 21-23, 2012.

5. Chaparala, R., Hartman, N.W., Springer, J.S. (2012). Examining CAD interoperability through the use of ontologies. Proceedings of the Computer-aided Design and Applications Conference, Niagara Falls, Canada, June 11-14, 2012.

6. Hartman, N.W., Fischer, K.L., Rosche, P. (2011). Potential application of STEP in combination with common collaborative formats.  Proceedings of 3D Collaboration & Interoperability Congress, Denver, CO, May 23-25, 2011.

7. Hartman, N.W. & Springer, M.L. (2011). A distance learning product lifecycle management (PLM) certificate program in technology. Presented at the Engineering Design Graphics Division of The American Society of Engineering Education 2011 Annual Midyear Meeting, Vancouver, BC, June 26-29, 2011.

8. Hartman, N.W., Horst, J., Wong, G. (2010). A process and metrics for measuring interoperability cost and risk.  Proceedings of 3D Collaboration & Interoperability Congress, Estes Park, CO, May 3-5, 2010.
9. McKenzie-Veal, D., Hartman, N.W., & Springer, J.S. (2010). Implementing ontology-based information sharing in product lifecycle management. Presented at the Engineering Design Graphics Division of The American Society of Engineering Education 65th Annual Midyear Meeting, Houghton, MI, October 3-6, 2010.
10. Connolly, P.E., Hartman, N.W., Takahashi, G., Lynam, J., Tittle, D. & Rose, D. (2009). Augmented reality in spatial ability development: A concept study. Presented at the Engineering Design Graphics Division of The American Society of Engineering Education 64th Annual Midyear Meeting, Erie, PA, October 14-16, 2009.
11. Hartman, N.W. (2009). Examining the importance of metrics for interoperability and collaboration. Proceedings of 3D Collaboration & Interoperability Conference, Estes Park, CO, May 17-20, 2009.
12. Hartman, N.W. & Connolly, P.E. (2009). Using lightweight formats in computer graphics education. Presented at the Engineering Design Graphics Division of The American Society of Engineering Education 64th Annual Midyear Meeting, Erie, PA, October 14-16, 2009.
13. *Miller, J.S. & *Hartman, N.W. (2009). Using the end user’s perspective on product lifecycle management critical factors to enhance the success rate of the implementation. Presented at the Engineering Design Graphics Division of The American Society of Engineering Education 63rd Annual Midyear Meeting, Berkeley, CA, January 4-7, 2009.
14. *Waldenmeyer, K. & *Hartman, N.W. (2009). Standard features and their impact on 3D engineering graphics. Presented at the Engineering Design Graphics Division of The American Society of Engineering Education 63rd Annual Midyear Meeting, Berkeley, CA, January 4-7, 2009.
15. *Waldenmeyer, K. & *Hartman, N.W. (2009). Multiple CAD formats in a single product data management system: A case study . Presented at the Engineering Design Graphics Division of The American Society of Engineering Education 63rd  Annual Midyear Meeting, Berkeley, CA, January 4-7, 2009.
16. *Hartman, N.W. & *Zink, M. (2008). JT as a global standard. JT Open International User’s Conference, Dallas, Texas, September 29-30, 2008.
17. *Hartman, N.W. & *Rasche, J. A. (2008). Industry and university partnership: Rolls-Royce/Purdue University PLM collaboration. Conference on Industry and Education Collaboration of The American Society of Engineering Education, New Orleans, LA, February 12 – 15, 2008.
18. *Hartman, N.W. & Lim, M.A. (2008). A comparison of functionality between STEP AP 203 E2, 3DXML, JT, and U3D technologies. Proceedings of 3D Collaboration & Interoperability 2008, Denver, CO, May 15-16, 2008.
19. *Hartman, N.W. & Lim, M.A. (2008). Examining neutral formats for visualization and data exchange. Proceedings of The 2008 IAJC-IJME International Conference, Nashville, TN, November 18-19, 2008, ISBN 978-1-60643-379-9.
20. *Hartman, N.W., *Connolly, P.E., *Wittenborn, D.B., *Miller, C.L. & *Schuver, M.T. (2008). Purdue University – Boeing product lifecycle management certificate program. Proceedings of the 2008 Conference for Industry and Education Collaboration of the American Society for Engineering Education Engineering Technology Division, New Orleans, LA, February 13-15, 2008.
21. *Sarapin, M.I., *Hartman, N.W., & *Bertoline, G.R. (2007). Advancing graduate education in a College of Technology context. Proceedings of the National Association of Industrial Technology Annual Convention, Panama City Beach, FL, October 23-27, 2007.
22. *Hudecki, A. & *Hartman, N.W. (2007). Visualizing the manufacturing planning process. Presented at the Engineering Design Graphics Division of The American Society of Engineering Education 62nd  Annual Midyear Meeting, Virginia Beach, VA, November 4-6, 2007.
23. *Hartman, N.W., Hoffmann, C.M., & Yang, W. (2007). Examining characteristics of 3dXML and CGR files to support collaboration. Presented at the SME Interoperability and 3D Collaboration Conference, Detroit, MI, May 1-3, 2007.
24. *Hartman, N.W. & *Wittenborn, D.B. (2007). A case study is utilizing legacy CAD data. Presented at The Engineering Design Graphics Division of The American Society for Engineering Education 61st Annual Midyear Meeting, San Diego, CA, January 13-16, 2007.
25. *+O’Brien, W., +Chandonais, M., +Henderson, R. +Prezbyndowski, M., *Hartman, N., & Rasche, J. (2006). Using knowledge-based solid modeling techniques and airfoil design data: A case study in developing an airfoil seed part generator. Proceedings of The 2006 IJME - INTERTECH Conference, Union, NJ, October 19 – 21, 2006.
26. *Hartman, N.W. & Miller, C.L. (2006). PDM tool selection and integration and the migration of legacy data in a PLM environment. Presented at PLM World, Long Beach, CA, May 8-12, 2006.
27. *Hartman, N.W. & Miller, C.L. (2005). Implementing a PDM installation and migrating data in a PLM environment. Presented at The Engineering Design Graphics Division of The American Society for Engineering Education 60 th Annual Midyear Meeting, Fort Lauderdale, FL,  December 5-7, 2005.
28. #Xu, H., *Glotzbach, R.J., *Hartman, N.W. (2005). A Complete Strategy for Web Application Security. Proceedings of the American Society for Engineering Education Annual Conference, Portland, OR, June 12-15, 2005.
29. *Hartman, N.W. (2004). Addressing the input to the PLM process: Examining the development and definition of expertise in the use of constraint-based CAD tools by practicing professionals. 2nd International Seminar on Digital Enterprise Technology. Seattle, WA, September 13 – 15, 2004.
30. *Miller, C.L. & Hartman, N.W. (2004). Development of an interdisciplinary product lifecycle management (PLM) curriculum. 2nd International Seminar on Digital Enterprise Technology. Seattle, WA, September 13 – 15, 2004.
31. *Ross, W.A., *Hartman, N.W., Brant, J. (2003). Quest for visual realism with CAD data in industrial competition. Presented at The Engineering Design Graphics Division of The American Society for Engineering Education 58 th Annual Midyear Meeting, Scottsdale, AZ, November 16-19, 2003.
32. *Branoff, T.J., *Hartman, N.W., & *Wiebe, E.N. (2002). Application of dynamic modeling in introductory engineering graphics classes. Presented at The Engineering Design Graphics Division of The American Society for Engineering Education 57 th Annual Midyear Meeting, Indianapolis, IN, October 27-30, 2002.
33. *Branoff, T.J. & *Hartman, N.W. (2002). The 3D model centered curriculum: Where are we now?  Presented at The Engineering Design Graphics Division of The American Society for Engineering Education 56 th Annual Midyear Meeting, Berkeley, CA, January 6-8, 2002.
34. *Branoff, T.J., *Hartman, N.W., & *Wiebe, E.N. (2003). Integrating constraint-based CAD into an introductory engineering graphics course: Activities and grading strategies. Proceedings of the 2003 Annual Meeting of the American Society for Engineering Education, Nashville, TN, June 22-25, 2003.
35. *Branoff, T. J. & *Hartman, N. W. (2002). The 3D model centered curriculum: How do we prepare our students? Proceedings of the 2002 Annual Conference of the Southeastern Section of the American Society for Engineering Education, Gainesville, FL, April 7-9, 2002.
36. *Miller, C.L. &  Hartman, N. W.  (1997). Design, Implementation, and Evaluation of a Parametric Modeling Course. Presented at the American Society for Engineering Education Annual Conference, Albuquerque, New Mexico, June 24-27, 2001. (paper in proceedings)
37. *Miller, C.L. & Hartman, N. W.   (1997). Developing a Theoretical /Applied Parametric Modeling Course for Technology Students.  Presented at the American Society for Engineering Education: The Engineering Design Graphics Division, Illinois-Indiana Section Meeting, March, 1997.

Tim McGraw

Journal Papers

McGraw, T. “ Fast Bokeh Effects Using Low-Rank Linear Filters. The Visual Computer, 2014, 1-11.

T. McGraw, T. Kawai, I. Yassine, L. Zhu, “Visualizing High-Order Symmetric Tensor Field Structure with Differential Operators,” Journal of Applied Mathematics, Volume 2011, July 2011, 27 pages.

T. McGraw, T. Kawai, J. Richards, “Allometric Scaling for Character Design,” Computer Graphics Forum, Volume 30, Issue, 1, March 2011, pp. 153-168.

T. McGraw, B.C. Vemuri, E. Ozarslan, Y. Chen, T. Mareci, “Variational Denoising of Diffusion-Weighted MRI,” Inverse Problems and Imaging, Volume 3, Number 4, November 2009, pp. 625-648.

T. McGraw, “Generalized Reaction-Diffusion Textures,” Computers and Graphics, Volume 32, Number 1, February 2008, pp. 82-92.

T. McGraw, M. Nadar, “Stochastic DT-MRI Connectivity Mapping on the GPU,” IEEE Transactions on Visualization and Computer Graphics, Volume 13, Number 6, November/December 2007, pp. 1504-1511.

T. McGraw, B. C. Vemuri, Y. Chen, M. Rao, T. Mareci, “DT-MRI Denoising and Neuronal Fiber Tracking,” Medical Image Analysis, Volume 8, Issue 2, June 2004, pp. 95-111.

Conference Proceedings

Garcia, E., McGraw, T. (2015, March) Ideal Flow: The art and science of early computational models by Aldo Giorgini. Balance-Unbalance, Tempe AZ.

Wei, S., Chen, V., McGraw, T. (2015, June) Computer vision aided lip movement correction to improve English pronunciation. ASEE Annual Conference, Seattle WA.

McGraw, T., Herring, D. (2014). High-Order Diffusion Tensor Connectivity Mapping on the GPU. In Advances in Visual Computing (pp. 396-405).

McGraw, T., Herring, D.(2014). Shape Modeling with Fractals. In Advances in Visual Computing (pp. 540-549).

T. McGraw, T. Kawai, “A Spectral Approach to Nonlocal Mesh Editing,” International Symposium on Visual Computing, Las Vegas, NV, Nov/Dec 2010, pp. 634-643.

T. McGraw, T. Kawai, I. Yassine, L. Zhu, “New Scalar Measures for Diffusion-Weighted MRI Visualization,” International Symposium on Visual Computing, Las Vegas, NV, Nov/Dec 2009, pp. 934-943. (Winner of iCORE Best Paper Award.)

I. Yassine, T. McGraw, “4th Order Diffusion Tensor Interpolation With Divergence and Curl Constrained Bezier Patches,” 6th International Symposium on Biomedical Imaging : Macro to Nano, Boston, MA, June 2009, pp. 634-637.

T. McGraw, B. Sowers, “Hardware Accelerated Per-Texel Ambient Occlusion Mapping,” In Proc. 4th International Symposium on Visual Computing, Las Vegas, NV, December 1-3, 2008, pp. 1125-1134.

I. Yassine, T. McGraw, “A Subdivision Approach to Tensor Field Interpolation,” Workshop On Computational Diffusion MRI, September 2008, pp. 117-124.

T. McGraw, M. Nadar, “Fast Texture-Based Tensor Field Visualization for DT - MRI,” 4th IEEE International Symposium on Biomedical Imaging: Macro to Nano, 2007, April 12, 2007, pp. 760-763.

S. Danda, T. McGraw, “A Comparison of the Bilateral Filter and TV-Norm Minimization for Image Denoising,” 4th IEEE International Symposium on Biomedical Imaging: Macro to Nano, 2007, April 12, 2007, pp. 676-679.

T. McGraw, B.C. Vemuri, B. Yezierski, T. Mareci, “Segmentation of High Angular Resolution Diffusion MRI Modeled as a Field of von Mises - Fisher Mixtures”, 9th European Conference on Computer Vision, 2006, May 7, 2006, pp. 461 – 475.

T. McGraw, B.C. Vemuri, B. Yezierski, T. Mareci, “Von Mises - Fisher Mixture Model of the Diffusion ODF”, 3rd IEEE International Symposium on Biomedical Imaging: Macro to Nano, 2006, April 6, 2006, pp. 65 - 68.

T. McGraw, B. C. Vemuri, Z. Wang, Y. Chen, M. Rao, T. Mareci, “Line Integral Convolution for Visualization of Fiber Tract Maps from DTI,” Medical Image Computing and Computer Assisted Intervention,Tokyo, Japan, August 2002.

B.C. Vemuri, Y. Chen, Z. Wang, T. McGraw, T. Mareci, P. Reier, S. Blackband, “Automated Fiber Tractography from DTI and its Validation,” 2002 IEEE International Symposium on Biomedical Imaging, July 2002.

B. C. Vemuri, Y. Chen, M.Rao, T. McGraw, Z. Wang and T.Mareci, “Fiber Tract Mapping from Diffusion Tensor MRI,” Proceedings of the IEEE Workshop on Variational and Level Set Methods, July 2001, pp. 81-88.

 

Carlos Morales
  1. Morales, C. (2005) Using on-line digital video to augment the teaching of frequency/spatial filtering operations. Computers in Education Journal. 15(1), 45-62.
  2. Morales, C. (2004). Animation production pipeline for matching dissimilar modeling, animation, and compositing tools. The Engineering Design Graphics Journal, 68(1), 55-59.
  3. Morales, C. (2004). Development of HDTV distance learning content. Educause Quarterly, 27(3), 6-12.
  4. Morales, C., Weaver, G., Maicher, K., Danforth, D., Martínez-Hernández, K., Pedela, R., Elkin, E., Nattam, N. (2006). The design process of a chemistry video game. 2006 Annual Conference Proceedings for the American Society for Engineering Education (CD-ROM: 2004-1747.pdf), Chicago, IL.
  5. Morales, C., Weaver, G., Maicher, K., Danforth, D., Martínez-Hernández, K., Pedela, R., Elkin, E., Nattam, N. (2006) Immersive chemistry video game.  Proceedings for ACM SIGGRAPH, Boston, MA.
  6. Weaver, G., Morales, C., Martínez-Hernández, K., Maicher, K. (2006) Development and Testing of a Chemistry-based Video Game: The Process. The 19thBiennial Conference on Chemical Education. West Lafayette, Indiana.
  7. Martínez-Hernández , K., Danforth, D., Robertson, P, Nattam, N., Morales, C., Weaver, G. (2006). Can video games contribute meaningfully to the Chemistry Curriculum?. The 19thBiennial Conference on Chemical Education. West Lafayette, Indiana.
  8. Morales, C. (2004). HDTV distance learning content. 2004 Annual Conference Proceedings for the American Society for Engineering Education (CD-ROM: 2004-1747.pdf), Salt Lake City, UT.
  9. Glotzbach, R., & Morales, C. (2003). Web enabling software for real-time online automated services. 2003 Annual Conference Proceedings for the American Society for Engineering Education (CD-ROM: 2198.pdf), Nashville, TN.
  10. Morales, C., & Kothary, N. (2003). Implementation of an on-line multimedia collaborative linear algebra tutoring system. 2003 Annual Conference Proceedings for the American Society for Engineering Education (CD-ROM: 2578.pdf), Nashville, TN.
  11. Morales, C., Glotzbach, R., Gonzales, D. (2003). Implementation of a multi-user on-line geometry collaboration tool. 2003 Annual Conference Proceedings for the American Society for Engineering Education (CD-ROM: 2578.pdf), Nashville, TN.
  12. Morales, C, & Sole, J. (2002). Trial Results from a Personalized Wireless On-Site Reference Distance Learning Solution.  2002 Annual Conference Proceedings for the American Society for Engineering Education (CD-ROM: 2388.pdf), Montreal, Canada.
  13. Morales, C, & Miller, C. (2002). Delivering Instructional Video Anywhere: An Intelligent Wireless Streaming Video Delivery Mechanism for Mobile Asynchronous Distance Learning.  2002 Annual Conference Proceedings for the American Society for Engineering Education (CD-ROM: 2386.pdf), Montreal, Canada
  14. Morales, C, & Goldenberg, M. (2002). Development of a collaborative multi-user engineering design graphics collaboration tool. 2002 Annual Conference Proceedings for the American Society for Engineering Education (CD-ROM: 2384.pdf), Montreal, Canada.
  15. Morales, C., & Cory, C. (2002). A method for integrating sales information with instructional content over a mobile wireless e-commerce environment for the home improvement market.  2002 Annual Conference Proceedings for Northeast Decision Science Institute (pp. 72-74). Puerto Rico.
  16. Morales, C., Cory C., & Bozell, D. (2001). A comparative efficiency study between a live lecture and a web based live-switched multi-camera streaming video distance learning instructional unit. 2001 Annual Conference Proceedings Information Resources Management Association (pp. 63-66). Hershey, PA.
  17. Morales, C. (2001). Development of an xml web based motion capture data warehousing and translation system for collaborative animation projects.  Proceeding of the 9th International Conference in Central Europe on Computer Graphics, Visualization and Computer Vision (pp. 168-173). WSCG, Plzen, Czech Republic.
  18. Morales, C. (2001). A method of delivering dynamic hyperlinked streaming instructional content over a wireless environment through the use of active server pages and xml technology.  2001 Annual Conference Proceedings for the American Society for Engineering Education (CD-ROM 00682.pdf), Albuquerque, NM.
  19. Meador, S., & Morales, C. (2001). Implementation of a low budget, raster based, 3D motion capture system using custom software and modern video tracking technology.  2001 Annual Conference Proceedings for the American Society for Engineering Education (CD-ROM 00476.pdf), Albuquerque, NM.
  20. Cory, C.A., Morales, C.R., (Feb 2001), A Model for Centralizing and Encapsulating Architectural Production Data and Distributing over the Web through the use of XML, Proceedings for IASTED Conference, Innsbruck Austria. (pg. 527-532) vol. 1.
  21. Homkes R., Morales, C., Taylor, K., & Foster, G. (2000). Implementing a VISION for the future of engineering and technology education. 2nd Global Congress on Engineering Education Proceedings (pp. 226-230). Wismar, Germany: UNESCO International Centre for Engineering Education.
  22. Morales, C. (2000). Defeating the bandwidth: A model for integrating web and cd-rom based training solutions. [CD ROM:proceed/00117.pdf – 11 pages]. 2000 Annual Conference Proceedings for the American Society for Engineering Education, St. Louis, MO.
  23. Homkes, R., Morales, C., Rowe, K., Smith, M. (2000). New engineering faculty  for the new millennium. [CD ROM:proceed/00444.pdf – 11 pages].  2000  Annual Conference Proceedings. American Society for Engineering Education, St. Louis, MO.
  24. Morales, C., & Meador, S. (2000). Trial results from a custom distance learning system based on hybridization of CD-ROM, web, and active-x component technology.  Proceedings of the Information Visualization Conference IV’2000 (pp. 39-43). IEEE Computer Society, Los Alamitos, CA.
  25. Morales, C.  (1999). Integration of high-end and low-end animation tools: A case study of the production pathway for the Chicago Bulls broadcast animation. Proceedings of the Information Visualization Conference IV’99 (pp. 354-362). IEEE Computer Society, Los Alamitos, CA.
  26. Morales, C., Nelson, D. (2007) Mobile 3D Games: From Start to Market. Charles River Media. ISBN # 1584505125
  27. Griffin, J., Morales, C., Finnegan, J. (2002) Web Design & Development Using XHTML. Franklin, Beedle and Associates. ISBN # 1-887902-57-0, 2003.

Pages