Publications

Research Publications and Presentations

Department: Construction Management Technology

Bryan Hubbard

Journals

  1. Hubbard, B. & Middaugh, B. (2012).  Leveraging Bluetooth Consumer Electronics as Proximity Sensors to Construction Hazards. International Journal of Construction Education and Research. (Accepted for publication, publication pending). 
  2. Zhao, Z., Zhang, S. Hubbard, B., & Zhao, X., (2012). The Emergence of the Solar Photovoltaic Power Industry in China. Renewable and Sustainable Energy Reviews. (Submitted).
  3. Middaugh, B., Hubbard, B., Zimmerman, N., & McGlothlin, J.D., (2012). Inhalation of Calcium Oxide and Quartz during Soil Stabilization Processes. Journal of Occupational and Environmental Hygiene. (Submitted).
  4. Middaugh, B., Hubbard, B., Zimmerman, N., & McGlothlin, J.D., (2011). Evaluation of Cut-Off Saw Exposure Control Methods for Respirable Dust and Crystalline Silica in Roadway Construction. Journal of Occupational and Environmental Hygiene Vol 9, 157-165.   
  5. Hubbard, B.J. & Hubbard S.L. (2011). Opportunities for Recruiting and Training Construction Workers in the Transportation Sector. Journal of Civil Engineering and Architecture, Vol  5, Number 7, pp. 15-23.
  6. Rapp, R. R., Lew, J., & Hubbard, B.J. (2010). Some Observations and Lessons Learned: Katrina, Wilma, and Iraq, Project Perpectives, The Annual Publication of International Project Management Association, Vol 33, pp. 16-21.
  7. Hubbard, B.J., & Hubbard, S.M. (2009). Activities to Enhance Civil Engineering Recruitment and Coordination with Industry. Transportation Research Record, No. 2109, pp. 22-30.
  8. McGlothlin, J.D.,  Hubbard,  B.J., Aghazadeh, F., &  Hubbard, S.M. (2009). Case Study:  Safety Training Issues for Hispanic Construction Workers.  Journal of Occupational and Environmental Hygiene, Vol. 6 Issue 9 pp. D1-D6.
  9. Hubbard, B.H., McGlothlin, J.D., & Hubbard, S.M. (2009). Case Study:  Safety Training Issues for Student Interns. Journal of Occupational and Environmental Hygiene, Vol. 6 Issue 8 pp.D45-D50.

Peer Reviewed Conference Papers

  1. Fan, S., Hubbard, B., & Shen, Q. (2011, August). Respirable Crystalline Silica Dust Exposure during Concrete Breaking and Drilling in Hong Kong Construction Industry.  CIB W099 Conference, Washington, D.C.
  2. Hubbard, B.J., Middaugh, B. , & Koelle, D. (2011, August). Field Testing of Bluetooth Proximity Device for Construction Health Hazards. CIB W099 Conference, Washington, D.C.
  3. Middaugh, B., Hubbard, B.J., Zimmerman, N., & McGlothlin, J.D. (August 2011). A Case Study in Real Time Exposure Training in Construction. CIB W099 Conference, Washington, D.C.
  4. Kmec, J., Hubbard, B.J., Bertando, M., & Revis, B., (2011, June). Defining a Role for a College of Technology in Nuclear Education. ASSE Annual Meeting, AC 2011-2818, Vancouver, B.C., Canada.  
  5. Hubbard, B.J., Middaugh, B.  & Bullock, D. (2011, January). Utilization of Bluetooth Technology to Assess Worker Proximity to Construction Health Hazards, Proceedings of the Transportation Research Board 89th Annual Meeting, Washington, D.C.
  6. Hubbard, B.J. & Rui, L. (2010, November). Utilizing a Virtual Organization for the Development and Delivery of an International Course in Industrial and Heavy Civil Construction. International Conference on Construction and Real Estate Management, Brisbane, Australia.
  7. McGlothlin, J.D., Hubbard, B.J., Motadezi A., & Cabral, J. (2010, May). Fall Protection Issues in the Wind Power Industry, 2010 International Conference on Fall Prevention and Protection, Morgantown, WV.
  8. Middaugh, B., Hubbard, B.J., Zimmerman, N., & McGlothlin, J.D. (2010, May). Development of a Practical Guide for Assessing Silica Dust Exposure Limits for Concrete Sawing Methods, CIB 2010 World Congress, Manchester, England.
  9. Hubbard, B.J., & Hubbard, S.M. (2009, January). Opportunities for Recruiting and Training Construction Workers in the Transportation Sector, Proceedings of the Transportation Research Board 88th Annual Meeting, Washington, DC.
  10. Hubbard, B.J. & Lillo, S.M. (2009, November). An Assessment of Challenges for the Construction of the Next Generation Nuclear Power Plants in the United States. International Conference on Construction and Real Estate Management, Beijing, China.
  11. Hubbard, B.J., Middaugh, B. , Zimmerman, N., & McGlothlin J.D. (2009, November).  Utilizing an Analytic Hierarchy Process (AHP) to Assess Concrete Saws with Silica Dust Reduction Equipment.  CIB W099 Construction Safety Conference, Melbourne, Australia.
  12. Hubbard, B.J., & Hubbard, S.M. (2009, April).  Utilization of the AISC Steel Sculpture for an Introductory Construction Plan Reading Course.  Associated Schools of Construction, 45th Annual International Conference, Gainesville, FL. 
  13. Korpus, R. Hubbard, B.J., Jones, P. Stromgren & Bennett (1998) Hydrodynamic Design of Integrated Propulsor/Stern Concepts by Reynolds-Averaged Navier-Stokes Techniques. Transaction of the Seventh International Symposium on Practical Design of Ship and Mobile Units (PRADS), The Hague, Netherlands.
  14. Korpus, R. Hubbard, B.J., Jones, P., Casper, Schemm, Koski & Manzi (1998)  Support of Advanced Sail by Chimera-Based Reynolds-Averaged Navier-Stokes Simulations (Unclassified Title). SAIC Document Control #9801486, Presented at the First Symposium on Marine Applications of Computational Dynamics, McLean, VA.
  15. Hubbard, B.J. & Chen, H.C. (1995). Calculations of Unsteady Flows Around Bodies with Relative Motion Using a Chimera RANS Method. ASCE Engineering Mechanics Conference, Boulder, CO.
  16. Hubbard, B.J., & Chen, H.C. (1994). A Chimera Scheme for Incompressible Viscous Flows with Application to Submarine Hydrodynamics, AIAA Paper No. 94-2210.

Invited Presentations

  1. Hubbard, B.J. and Middaugh, B. (2011, July). Health Hazards in the Construction Industry.  Tsinghua Summer School for International Construction, Beijing, China.  
  2. Hubbard, B.J. and Middaugh, B. (2011, June).  Exposure Assessment of Inhalation Hazards in Roadway Construction: A Study of Engineering Controls, Prevention, and Training to Improve Worker Safety. Hong Kong Polytechnic University, Hong Kong, China.  
  3. Hubbard, B.J. (2010, October). Prevention Through Design Using Safety Engineering Principles, Case Study in the Wind Farm Industry.  NIOSH FACE Meeting, Morgantown, WV.
  4. Hubbard, B.J. (2010, April). Analytical Hierarchal Process (AHP) for Selecting Personal Protective Equipment.  2010 Indiana Safety and Health Conference & Expo, Indianapolis, IN.
  5. Hubbard, B.J. (2010, January).  Conventional Bridge Deck Patching Materials and Methods. Indiana County Bridge Conference, West Lafayette, IN.
  6. Hubbard, B.J. (2009, November).   An Assessment of Needs for the United States Nuclear Construction Industry, North China Electric Power University, Beijing, China.
  7. Hubbard, B.J. (2009, January).   Bridge Construction Inspection for Local Public Agencies. Indiana County Bridge Conference, West Lafayette, IN.
  8. Hubbard, B.J. (2008, October).  Components of a Successful Construction  Internship Program. Marquette University, Construction Engineering Industry Advisory Council, Milwaukee, WI.

Patents

  1. U.S. Patent 6,663,694 Air-to-Air Atmospheric Heat Exchanger for Condensing Cooling Tower Effluent. Hubbard et al, Awarded December 16, 2003.
  2. U.S. Patent 6,663,087 Air-to-Air Atmospheric Heat Exchanger for Condensing Cooling Tower Effluent. Hubbard et al, Awarded December 16, 2003.
Yi Jiang

Full articles in refereed journals

 

  1. Jiang, Y.,Zhao, G., Li, S., Guan, B., & Yang, Y. (2013). A model for life-cycle benefit and cost analysis of highway projects. International Journal of Pavement Research and Technology, 2013, 6(5): pp 633-642.
  2. Liu, S., Li, S., Liu, H., Wang, Z., & Jiang, Y. (2012). Evaluation of safety effects of freeway horizontal curves in Shanxi province (in Chinese). Journal of China and Foreign Highways, 2012, Issue 6, pp 2-6.
  3. Zhao, D., Li, S., Liu, H., Wang, Z., & Jiang, Y. (2012). Evaluation of safety effects of freeway vertical curves in Shanxi province (in Chinese). Journal of China and Foreign Highways, 2012, Issue 6, pp 7-14.
  4. Liu, H., Shen, J., Zhao, D., Li, S., Wang, Z., & Jiang, Y. (2012). The general patterns and characteristics of roadside crashes on Shanxi freeways (in Chinese). Journal of China and Foreign Highways, 2012, Issue 6, pp 19-23.
  5. Zhao, D., Shen, J., Liu, H., Li, S., Wang, Z., Jiang, Y., & Zhang, Y. (2012). Analysis and evaluation of the freeway roadside safety improvements in Shanxi province (in Chinese). Journal of China and Foreign Highways, 2012, Issue 6, pp 23-28.
  6. Shen, J., Zhao, D., Liu, H., Li, S., Wang, Z., & Jiang, Y. (2012). The characteristics of single-car and multi-car accidents with fatalities and injuries on Shanxi freeways (in Chinese). Journal of China and Foreign Highways, 2012, Issue 6, 29-32.
  7. Shen, J., Zhao, D., Liu, H., Li, S., Wang, Z., & Jiang, Y. (2012). The characteristics and distributions of freeway traffic accidents with fatalities and injuries on Shanxi freeways (in Chinese). Journal of China and Foreign Highways, 2012, Issue 6, 32-36.
  8. Li, S., Shield, T., Noureldin, S. & Jiang, Y. (2012). A field evaluation of surface friction performance of chip seals in Indiana. Journal of the Transportation Research Board, 2295, pp 11–18.
  9. Li, S., Shield, T., Noureldin, S. & Jiang, Y. (2012). A field evaluation of surface friction performance of chip seals in Indiana. Journal of the Transportation Research Board, 2295, 11-18.
  10. Yang, Y., Jiang, Y., Yu, J., & Fu, X. (2012). Comparison of teaching methods of a highway surveying and design course in China and the USA. (in Chinese). Journal of Architectural Education in Institutions of Higher Learning, 2012(3), 66-70.
  11. Jiang, Y., Chen, H., & Li, S. (2010). Determination of contract time and incentive and disincentive values of highway construction projects.  The International Journal of Construction Education and Research, 6(4), 285-302.
  12. Chen, H., Jiang, Y., Li, S., & Nantung, T. (2010). Traffic prediction model based on ArcGIS. (in Chinese). Journal of Tongji University (Natural Science), 38(8), 1165-1170.
  13. Jiang, Y. (2010). Application and comparison of regression and Markov chain methods in bridge condition prediction and system benefit optimization.  Journal of the Transportation Research Forum, 49(2), 91-110.
  14. Jiang, Y., Chen, H., & Li, S. (2009). Computation of user costs at freeway work zones using weigh-in-motion traffic data. The International Journal of Construction Education and Research, 5(3), 197–219.
  15. Li, S., Zhu, K., Noureldin, S., & Jiang, Y. (2009). Evaluation of pavement friction performance on interchange ramps at network level.  Journal of Performance of Constructed Facilities, 23 (2), 109-114.
  16. Tan, Z., Jiang, Y., Guo, L., & Zhou, Y. (2009). Thermal stresses in asphalt overlay paved on existing cement concrete pavements (III) –Thermal stresses analysis and local treatment effects. (in Chinese). Journal of Tongji University (Natural Science), 37(3), 333-338.
  17. Tan, Z., Xiong, J., Jiang, Y., & Zhou, Y. (2009). Thermal stresses in asphalt overlay paved on existing cement concrete pavements (II) – Approximate solutions to section internal forces and interface forces. (in Chinese). Journal of Tongji University (Natural Science), 37(2), 197-202.
  18. Tan, Z., Zhou*, Y., & Jiang, Y. (2009). Thermal stresses in asphalt overlay paved on existing cement concrete pavements (I) – Mechanistic models. (in Chinese). Journal of Tongji University (Natural Science), 37(1), 41-46.
  19. Jiang, Y. Li, S. Nantung, T., Mangold, K. & MacArthur, S. (2008). Creation of truck axle load spectra using weigh-in-motion data. Journal of the Transportation Research Forum, 47(4), 45-61.
  20. Chen, S. & Jiang, Y. (2008). Pavement reflective cracking control with coarse-aggregate asphalt mix interlayer. The International Journal of Construction Education and Research, 4(3), 200–209.
  21. Jiang, Y. & Wu, H. (2007). A method for highway agency to estimate highway construction durations and set contract times. The International Journal of Construction Education and Research, 3(3), 199-216.
  22. Jiang, Y. & Li, S. (2007). Methods for repair and rehabilitation of Portland cement concrete pavement. (in Chinese). Journal of China & Foreign Highways, 27(2), 48-52.
  23. Jiang, Y. & Wu, H. (2007). Production rates of highway construction activities. The International Journal of Construction Education and Research, 3(2), 81-98.
  24. Jiang, Y., Li*, S., & Shamo, D. (2006). A platoon-based traffic signal timing algorithm for major-minor intersection types. Journal of Transportation Research Part B 40, 543-562.
  25. Li, S., Nantung, T., & Jiang, Y. (2005). Assessing issues, technologies, and data needs to meet traffic input requirements by M-E pavement design guides: implementation initiatives.  Journal of the Transportation Research Board, 1917, 141-148.
  26. Jiang, Y., Li, S., & Zhao, Z. (2005). Performance evaluation of coordinated intersections with GPS devices.  Journal of the Transportation Research Forum, 44(3), 77-91.
  27. Jiang, Y., Li, S., & Zhu, Q.K. (2005). Traffic delay studies at signalized intersections with GPS devices.  ITE Journal, 75(8), 30-39.
  28. Jiang, Y., & Li, S. (2005). Characteristics of vehicle platoons at isolated intersections. Journal of the Transportation Research Forum, 44(1), 5-25.
  29. Jiang, Y., & Li, S. (2005). Gray system model for estimating the pavement international roughness index.  Journal of Performance of Constructed Facilities, 19(1), 62-68.
  30. Jiang, Y. (2003). The Effects of traffic flow rates on asphalt pavement construction productivity at freeway work zones. Journal of the Transportation Research Forum, 57(3), 83-103.
  31. Jiang, Y. (2003). Prediction of freeway traffic flows using Kalman predictor in combination with time series. Journal of the Transportation Research Forum, 57(2), 99-118.
  32. Jiang, Y. (2002). Dynamic prediction of traffic flow and congestion at freeway construction zones. Journal of Construction Education, 7(1), 45-57.
  33. Jiang, Y., & Li, S. (2002). Measuring and analyzing vehicle position and speed data at work zones using global positioning system. ITE Journal, 72(3), 48-53.
  34. Jiang, Y. (2001). A model for estimating traffic delays and vehicle queues at freeway work zones. Journal of the Transportation Research Forum, 40(4), 65-81.
  35. Jiang, Y. (1999). A model for estimating excess user costs at highway work zones. Journal of the Transportation Research Board, 1657, 31-41.
  36. Jiang, Y. (1999). Traffic capacity, speed and queue-discharge rate of Indiana’s four-lane freeway work zones. Journal of the Transportation Research Board, 1657, 10-17.
  37. Jiang, Y. (1998). Performance of a concrete pavement overlay. Concrete International, 20(5), 40-42.
  38. Jiang, Y. & McDaniel, R. S. (1994). Application of cracking and seating and use of fibers to control reflective cracking. Transportation Research Record, 1388, 150-159.
  39. Jiang, Y. & Sinha, K. C. (1992). Simulation approach to prediction of highway structure conditions. Transportation Research Record, 1347, 11-17.
  40. Jiang, Y. & Sinha, K. C. (1990). Approach to combine ranking and optimization techniques in highway project selection. Transportation Research Record, 1262, 155-161.
  41. Jiang, Y. & Sinha, K. C. (1989). Bridge service life prediction model using the Markov chain. Transportation Research Record, 1223, 24-30.
  42. Jiang, Y. & Sinha, K. C. (1989). Dynamic optimization model for bridge management systems. Transportation Research Record, 1211, 92-100.
  43. Jiang, Y. Saito, M., & Sinha, K. C. (1988). Bridge performance prediction model using the Markov chain. Transportation Research Record, 1180, 25-32.

 

Conference or symposium proceedings

 

  1. Jiang, Y., Ma, Y., Li, S., & Zhao, G. (2013). Safety effects of geometric elements in design exceptions. Proceedings of the 2013 International Conference on Construction and Real Estate Management, (pp 725-740), Karlsruhe, Germany.
  2. Li, S., Yang, Y., Guan, B., Zhao, G., Harris, D., Jiang, Y., & Noureldin, A.S. (2013). Surface characteristics of ultrathin bonded wearing course preservation treatments. Proceedings (in CD) of the 92nd Transportation Research Board Annual Meeting. Washington, D.C.
  3. Jiang, Y., Zhao, G. & Li, S. (2012). Comparison of software packages for life cycle cost and benefit analysis of highway projects. Sustainable Transportation Systems: Plan, Design, Build, Manage, and Maintain, American Society of Civil Engineers, the 9th Asia Pacific Transportation Development Conference, Chongqing, China.
  4. Li, S., Sun, Y., Jiang, Y., Noureldin, S. & Shield, T. (2012). Field evaluation of ultrathin 4.75-mm hot mix asphalt dense-graded overlay: aggregate properties and pavement surface friction. Proceedings of the 91st Transportation Research Board Annual Meeting. Washington, D.C.
  5. Li, S., Noureldin, S., Zhu, K. and Jiang, Y. (2011). Pavement surface microtexture: testing, characterization, and frictional interpretation. The ASTM International Symposium on Pavement Performance: Trends, Advances, and Challenges, Tampa, Florida.
  6. Jiang, Y. Chen, H., & Li, S. (2011). Truck traffic volume distributions and axle load spectra from weigh-in-motion data. Proceedings of the 7th International Conference on Road and Airfield Pavement Technology, (pp. 833-848), Bangkok, Thailand.
  7. Jiang, Y. Chen, H., & Li, S. (2011). Work zone user costs and incentive values of highway construction projects. Proceedings of the Sixth International Conference on Construction in the 21st Century (CITC-VI) – “Construction Challenges in the New Decade”, (pp. 702-708), Kuala Lumpur, Malaysia.
  8. Jiang, Y., Chen, H., & Li, S. (2010). The effects of user costs at highway work zones on the incentive and disincentive values of highway construction projects. Proceedings (in jump drive) of the CIB 2010 International Conference, Manchester, England, May 2010.
  9. Tan, Z., Zhou, Y., Jiang, Y., & Li, S. (2010). Simplified explicit method for thermal stresses in asphalt overlays on cement concrete pavements.  Proceedings (in CD) of the 89th Transportation Research Board Annual Meeting. Washington, D.C.
  10. Jiang, Y., & Zhao, Z. (2009). Experiences and evaluations of pavement reflective cracking control techniques. Proceedings of the 14th Hong Kong Society for Transportation Studies (HKSTS) International Conference on Transportation and Geography, Volume 2, (pp. 657-666), Hong Kong, China.
  11. Jiang, Y., Lei, M., Li, S., & Wang, Z. (2009). Safety perspectives on typical freeway features in China. Proceedings of the Second International Symposium on Freeway and Tollway Operations (PowerPoint Presentation in CD). Honolulu, Hawaii, USA.
  12. Jiang, Y., Lei, M., Ding, G., Li, S., & Wang, Z. (2008). A Road Safety Audit on a Freeway Project in China. Proceedings of the 2008 CIB International Conference: Evolution of and Directions in Construction Safety and Health (pp. 333-348). Gainesville, Florida, USA.
  13. Jiang, Y. (2007). Major factors affecting highway construction productivities. Proceedings of the Fourth International Conference on Construction in the 21st Century (pp. 305-312). Gold Coast, Australia.
  14. Bowen, F., Du, Y., Li, S., Jiang, Y., Nantung, T., Noureldin, S., Knieser, M., & Rizkalla, M. (2007). Dynamic content based vehicle tracking and traffic monitoring system. Proceedings of the SPIE Electronic Imaging 2007 Symposium, Vol. 6497, 64970I-1-11. San Jose, California, USA.
  15. Li, S., Jiang, Y., Zhu, K., & Nantung, T.E. (2007). Truck traffic characteristics for mechanistic-empirical flexible pavement design: evidence, sensitivities, and implications. Proceedings (in CD) of the 86th Transportation Research Board Annual Meeting. Washington, D.C.
  16. Li, S., Zhu, K., Noureldin, S. & Jiang, Y. (2006) Surface friction on longitudinal tined concrete pavements: new findings from field testing and finite element analysis simulation.  Proceedings (in CD) of the 85th Transportation Research Board Annual Meeting. Washington, D.C.
  17. Jiang, Y, & Zhao, Z. (2005).  Measurements and Effects of Cycle Times of Material Delivery Trucks in Asphalt Pavement Construction.  Proceedings of the First International Conference on Transportation Logistics (pp. 1-14). Singapore.
  18. Jiang, Y. (2004). The Effects of bridge condition predictions on bridge system benefit optimization. Proceedings of the 2nd International Conference on Bridge Maintenance, Safety, Management and Cost (pp. 175-183). Kyoto, Japan.
  19. Jiang, Y., & Nantung, T. (2003). Lessons learned from the sawed and sealed asphalt overlay projects in Indiana. Proceedings of the 3rd International Symposium on Maintenance and Rehabilitation of Pavements and Technological Control (pp. 575-584). University of Minho, Guimaraes, Portugal.
  20. Jiang, Y., Li, S., & Zhu, K. Q. (2002). Applications of global positioning system in traffic data collections. Proceedings of the 3rd International Conference on Traffic and Transportation Studies (pp. 1322-1329). Guilin, China.
  21. Li, S., Jiang, Y., & Grenard, J. (2000). The characteristics and mathematical distributions of vehicle platoons on Indiana highway corridors. Proceedings of the 6th International Conference on Applications of Advanced Technologies in Transportation Engineering (pp. 1-9). Singapore.
  22. Jiang, Y., & McDaniel, R. S. (1993). Evaluation of the impact of concrete pavement restoration techniques on pavement performance. Proceedings of the 5th International Conference on Concrete Pavement Design and Rehabilitation (pp. 153-162). West Lafayette, Indiana, USA.
  23. Sinha, K. C., Bowman, M. D., Jiang, Y., Murthy, S., Saito, M., & Tee, A. B. (1990). Emerging methodologies for bridge management systems. Proceedings of the NATO Advanced Research Workshop on Bridge Evaluation, Repair and Rehabilitation (pp. 23-39). Baltimore, Maryland, USA.
  24. Jiang, Y., Saito, M., & Sinha, K. C. (1988). A bridge condition prediction model for bridge management systems. Proceedings of Symposium on Bridge Research in Process (pp. 277-280). Des Moines, Iowa, USA.

 

Books and Book Chapters

 

  1. Jiang, Y. (2007).  Highway Construction and Quality Control. West Lafayette, Indiana: Learning Systems, Inc.
  2. Jiang, Y., Lew, J. J., & Keith, D. P. (2008). Soils and foundations. West Lafayette, Indiana: Learning Systems, Inc.
  3. Jiang, Y., Lew, J. J., & Keith, D. P. (2008). Laboratory manual for soils and foundations. West Lafayette, Indiana: Learning Systems, Inc.
  4. Jiang, Y. (2005). Bridge management systems. Chapter 22 in T. F. Fwa (Ed.). The handbook of highway engineering (pp. 775-827). CRC Press. ISBN #: 0849319862.
     

Research reports

  1. Jiang, Y., Zhao, G., & Li, S. (2013). An Economic Analysis Methodology for Project Evaluation And Programming. (78 msp). Final Report, SPR-3429. Indiana Department of Transportation and Purdue University, Joint Transportation Research Program.
  2. Jiang, Y., Y. Ma, and S. Li. (2012). Development of a Design Flexibility Toolkit. Publication FHWA/IN/JTRP-2012/20. Joint Transportation Research Program, Indiana Department of Transportation and Purdue University, West Lafayette, Indiana, 2012. doi: 10.5703/1288284314981.
  3. Li, S., Noureldin, S., Jiang, Y., & Sun, Y. (2012). Evaluation of  Pavement Surface Friction Treatments. Publication FHWA/IN/JTRP-2012/04. Joint Transportation Research Program, Indiana Department of Transportation and Purdue University, West Lafayette, Indiana, 2012. DOI: 10.5703/1288284314663
  4. Li, S., Du, Y., & Jiang, Y. (2010). Site Verification of Weigh-In-Motion Traffic and TIRTL Classification Data. Final Report, Report No. FHWA/IN/JTRP-2010/2. Indiana Department of Transportation and Purdue University, Joint Transportation Research Program.
  5. Jiang, Y., & Chen, H. (2009).  Contract Time Optimization Methodologies for Highway Construction Projects. Final Report, FHWA/IN/JTRP-2009/8. Indiana Department of Transportation and Purdue University, Joint Transportation Research Program.
  6. Jiang, Y., Li, S., Nantung, T., Chen, H. (2008). Analysis and Determination of Axle Load Spectra and Traffic Input for the Mechanistic-Empirical Pavement Design Guide. Report No. FHWA/IN/JTRP-2008/7. Indiana Department of Transportation and Purdue University, Joint Transportation Research Program.
  7. Jiang, Y. (2007). Durability and Retroreflectivity of Pavement Markings (Synthesis Study). Report No. FHWA/IN/JTRP-2007/11. Indiana Department of Transportation and Purdue University, Joint Transportation Research Program.
  8. Jiang, Y. (2006). The effectiveness and criteria for placement of raised pavement markers (synthesis study). Report No. FHWA/IN/JTRP-2006/6. Indiana Department of Transportation and Purdue University, Joint Transportation Research Program.
  9. Li, S., Noureldin, S., Zhu, K., & Jiang, Y. (2006). Surface Texture and Friction Characteristics on Tined Concrete Pavements. SPR-2984. Indiana Department of Transportation and Purdue University, Joint Transportation Research Program.
  10. Jiang, Y., & Wu, H. (2004). Determination of INDOT highway construction production rates and estimation of contract times. (Report No. FHWA/IN/JTRP-2004/11). Indiana Department of Transportation and Purdue University, Joint Transportation Research Program.
  11. Jiang, Y., Li, S., & Shamo, D. (2003). Development of vehicle platoon distribution models and simulation of platoon movements on Indiana rural corridors (Report No. FHWA/IN/JTRP-2002/23). Indiana Department of Transportation Purdue University, Joint Transportation Research Program.
  12. Jiang, Y. (1999). Indiana freeway traffic characteristics and dynamic prediction of freeway traffic flows (Report No. FHWA/INDOT/SPR-2121). Indiana Department of Transportation.
  13. Jiang, Y., Li, S., & Shamo, D. (1999). Development of a platoon-based adaptive traffic signal control system (Report No. FHWA/INDOT/SPR-2145). Indiana Department of Transportation.
  14. Jiang, Y. (1998). Traffic characteristics and estimation of traffic delays and user costs at Indiana freeway work zones (Report No. FHWA/INDOT/SPR-2121). Indiana Department of Transportation.
  15. Farooq, O., James, D., Sinha, K.C., Jiang, Y., & Nagle, J. (1994). The development of highway safety management system for Indiana (Report No. FHWA/IN/JHRP-94/14). Joint Transportation Research Program.
  16. Jiang, Y. (1992). Evaluation of sawed and sealed asphalt overlay on I-80 (Report No. INDOT/92-2). Indiana Department of Transportation.
  17. Jiang, Y., & McDaniel, R. S. (1992). Evaluation of cracking and seating technique and use of polypropylene fibers in bituminous mixtures on I-74 (Report No. INDOT/92-1). Indiana Department of Transportation.
  18. Jiang, Y. (1991). Evaluation of concrete pavement restoration techniques on I-65 (Report No. INDOT/91-1). Indiana Department of Transportation.
  19. Jiang, Y., & McDaniel, R. S. (1990). Pipe coating study — evaluation of galvalume and aramid fiber-bonded bituminous coated pipes (Report No. INDOT/90-1). Indiana Department of Transportation.
  20. Jiang, Y., & Sinha, K. C. (1989). The development of optimal strategies for maintenance, rehabilitation and replacement of highway bridges, Final report Vol. 6: performance analysis and optimization (Report No. FHWA/IN/JHRP-89/13). Purdue University.
  21. Sinha, K.C., Saito, M., Jiang, Y., Murthy*, S., Tee, A. B., & Bowman, M. D. (1989). The development of optimal strategies for maintenance, rehabilitation and replacement of highway bridges, Final report Vol. 1: the elements of Indiana bridge management system (IBMS). (Report No. FHWA/IN/JHRP-88/15). Purdue University.

 

Douglas Keith

Publications

  1. Co-author of BCM 385 course / lab manual, 1999.

Presentations

  1. March, 2008. Application usage of GPS w/ CORS stations. Tianjin University, Tianjin, China.
  2. March, 2008. Application usage of GPS w/ CORS stations. Harbin Institute of Technology, Harbin, China.
  3. May, 2008. Earthmoving techniques to improve production. Tianjin University, Tianjin, China.
  4. May, 2008. Earthmoving techniques to improve production. Harbin Institute of Technology, Harbin, China.
Randy Rapp

Proceedings of the 10th International Conference of the International Institute for Infrastructure Resilience and Reconstruction: Collaboration for Effective Disaster Mitigation and Response. Co-editor. (ISBN 978-1-62671-10153). Purdue Scholarly Publishing Services, May 2014.

Mentoring Key Project Managers for Executive Management, invited presentation to US and international professionals of Restoration Industry Association at the annual conference, April 2014.

Construction Site Planning and Logistical Operations: Site-Focused Management for Builders. Co-editor with Bradley Benhart. (ISBN 978-1-55753-646-4). Purdue University Press, 2015.

Leadership Success within Disaster Restoration Projects. In Journal of Emergency Management 12(1), 75-81. Lead author with Bassam Baroudi, University of South Australia (City East).

Stakeholder Management in Disaster Restoration Projects. Accepted for publication in International Journal of Disaster Resilience in the Built Environment. Co-author with Bassam Baroudi, University of South Australia (City East).

Disaster Recovery Project Management Lessons Learned Under Military Contract: Hurricanes Katrina and Wilma. To 9th conference of the International Institute for Infrastructure Renewal and Reconstruction, Brisbane, Australia, 2013. Lead author with Bassam Baroudi, University of South Australia (City East).

What Makes A Leader? Article excerpted with permission from ICCREM by Cleaning & Restoration magazine of the Restoration Industry Association. January 2013: 50(1). Lead author with Bassam Baroudi, University of South Australia (City East).

Disaster Restoration Projects: A Conceptual Project Management Perspective. Paper published by 6th International Conference and Workshop on the Built Environment in Developing Countries (ICBEDC), Adelaide, South Australia, December 2012. Co-author with Bassam Baroudi, University of South Australia (City East). Rated in the top nine of more than 85 papers.

Traits and Core Values Most Demanded for Disaster Restoration Project Leadership Success. Paper presented to International Conference on Construction and Real Estate Management, Kansas City, 2012. Lead author with Bassam Baroudi, University of South Australia (City East).

Construction Due Diligence in Different Project Delivery Systems. Co-authored paper presented by lead author Jing Pan to International Conference on Construction and Real Estate Management, Kansas City, October 2012. Co-authors included Robert F. Cox.

Panic Rooms and Restoration of Damaged Housing.
In A. T. Carswell, Encyclopedia of Housing (2nd ed., ISBN 978-1-41298-957-2). Sage Publications, 2012.

Recovery Planning for Critical Pandemic-Associated Built Infrastructure. In J. E. Dietz and D. Black (Eds.), Pandemic Planning (pp. 259-283, ISBN 978-1-43985-765-6). CRC Press, 2012.

Disaster Recovery Project Management: Bringing Order from Chaos (ISBN 978-1-55753-588-7). Published in July 2011 by Purdue University Press.

Restorative Drying Improves Building Resilience. Paper presented to the 7th conference of the International Institute for Infrastructure Renewal and Reconstruction, Sri Lanka, 2011. Lead author with Bassam Baroudi, University of South Australia (City East).

A Project Management Approach to Disaster Response and Reconstruction Operations. Paper for the Australasian Universities Building Education Association (AUBEA), April 2011. Co-author with Bassam Baroudi, University of South Australia (City East).

Disaster Recovery Project Controls. Invited presentation to Indiana Hoosier section of AACE-International, March 2011.

Construction Inspection of Public Works. Two-day professional seminar for University of Washington TRANSPEED, delivered six times, 2005-2010.

Disaster Restoration Professional Body of Knowledge. In International Journal of Construction Education and Research, vol. 6, no. 3, July 2010, pp. 202-218. Jing Pan, co-author.

Project Controls for Disaster Restoration and Reconstruction and Planning for Post-Disaster Project Controls. Panel discussions at AACE International Annual Meeting, Atlanta, June 30, 2010.  (Ranked #1 of 89 sessions for attendee responses to “Would you attend a presentation by this speaker again?”) Co-creator and panel member with E. E. (Ted) Douglas.

Project Controls for Disaster Recovery. Peer-reviewed paper for disaster recovery panel discussions, Transactions of the 54th Annual Meeting of AACE International, at Atlanta, June 2010. Ted Douglas, co-author.

Some Observations and Lessons Learned; Katrina, Wilma, and Iraq. Paper presented by Prof. Bryan Hubbard to the International Council for Building (CIB), The Lowry, Salford Quays, United Kingdom, May 2010. Professors Jeffrey Lew and Bryan Hubbard, co-authors.

Complex Urgency: Recovering from Katrina and Wilma. Technical article, blind peer-reviewed in Cost Engineering journal (AACE-I), December 2009.

Hurricanes and Oil: Adventures in Paradise?  Invited by Military Officer Association of America (MOAA), Lafayette Chapter, to present information about experiences with hurricane and oil infrastructure recovery at their monthly meeting, December 2009.

Disaster and Reconstruction--Experiences with Hurricanes and the Iraqi Oil Program. Invited by Wabash Area Lifetime Learning Association (WALLA) for upcoming Infrastructure Series presentation during November 2009.

Developing and Maintaining Trust between Contractual Parties for Disaster Restoration and Reconstruction. Presented to the International Conference on Construction and Real Estate Management (ICCREM), Central University of Finance and Economics, Beijing, November 2009.

Results from Survey of Membership for Certified Restorer Body of Knowledge. Invited presentation and handout to deliver results of partnership research with doctoral student, Jing Pan, to Restoration Industry Association Fall Conference, St. Louis, October 2009.

Disaster Restoration and Reconstruction Management Moves Ahead at Purdue. Co-author with Dr. Robert Cox in Restoration & Remediation industry magazine, September-October 2009.

Disaster Restoration and Reconstruction at Purdue: An Initiative to Enhance Professionalism and Deliver a Sustainable Competitive Advantage. Presentation invited by the National Disaster Reconstruction Conference, New Orleans, June 2009.

Some Lessons Learned: Katrina, Wilma, and Iraq. Presentation invited by Connections Conference, Clearwater, Florida, May 2009.

Master of Science Degree Program in Portfolio and Program Management. Peer-reviewed paper and presentation to the 45th Annual Conference of the Associated Schools of Construction at University of Florida, April 2009.

Disaster Restoration and Reconstruction Management: On the Gulf Coast, in Iraq, and at Purdue. Presentation invited by the St. Louis section of AACE International, March 2009.

Disaster Restoration and Reconstruction Management at Purdue: A New Concentration for the Building Construction Management Degree. With Dr. Robert Cox, presentation invited by the Restoration Industry Association Fall Conference, November 2008.

Complex Urgency: Recovering from Katrina and Wilma. Peer-reviewed paper and presentation, Transactions of the 52nd Annual Meeting of AACE International, at Toronto, Canada, July 2008.

Recommended Practice (RP) 15R-81, Profitability Methods. Explains the most common methods by which industry forecasts profitability, July 2008.

Enhancing Professionalism in Construction Project Controls. Peer-reviewed paper and presentation, International Proceedings of the 44th Annual Conference of the Associated Schools of Construction, at Auburn University, April 2008.

Construction Inspection of Public Works Projects. University of Washington, TRANSPEED, May 2005; March May, and October 2008; May 2009; May 2010.

Estimating and Bidding: Costing and Pricing the Work. Revision of Chapter 16 in Financial Management and Accounting for the Construction Industry, Matthew Bender and Co., February 2008.

The Utility of a Civil Engineering Education. Keynote address for Scholarship Dinner, SE Wisconsin Branch, ASCE, January 2008.

Portfolio and Program Management. Professional Practice Guide (PPG) #14 editor, for AACE International, October 2007.

Certification and Technical Initiatives of AACE International. Presentation invited by the Chicago Section of AACE International, September 2007.

Introduction to Engineering Construction Inspection (ISBN 0-471-20167-7). Co-author with Edward Fisk, published in 2004 by John Wiley & Sons.

Construction Management at Milwaukee School of Engineering. Presentation invited by Chicago CMAA, April 2004.

Public Works Construction Project Management. Two-day professional seminar for University of Washington TRANSPEED, delivered twice, 2004-05.

Grooming Project Managers for Company Leadership. Executive management improvement peer-reviewed technical paper in Cost Engineering journal (AACE-I), May 2004.

Construction Cost Engineering. Two-day seminar delivered to professionals seeking more knowledge of construction cost engineering from ASCE, April and October 2004.

Business and Program Planning. Professional Practice Guide (PPG) #14 editor, for AACE-I, November 2002.

Comparison of Project Manager and Top Manager Perceptions of Emerging Executive Knowledge Required in Construction Firms. Disquisition (dissertation) defended in partial fulfillment of requirements for the degree of Doctor of Management, Webster University, August 2002.

Easy(?) Decision-making. Overview of techniques and concerns by which to improve decision-making at the construction project level. Article in Cost Engineering journal (AACE-I), August 2002.

Foundations for Enhancing Competency in Cost Engineering. Two-day and four-day seminars delivered to professionals seeking more knowledge of cost engineering, with view to taking the AACE-I certification examination for cost engineers, eight times, 2002-05.

Evolution, Not Revolution. Analysis of Nashville District, U.S. Army Corps of Engineers, conversion of project offices from functional to area wide, market driven structure. Published as refereed paper in Journal of Management in Engineering, ASCE, July 2001.

Business Strategy: Ideas for Construction Masters Degrees. Adaptation of strategic perspectives construction master’s degree program curricula to allow instruction to transcend the baccalaureate project management focus. Published in Journal of Leadership and Management in Engineering, ASCE, April 2001. Orally presented to faculty attending Associated Schools of Construction regional meeting, November 2000.

Interest Rates, the Dow Jones Industrial Average, and Net Income: Their Effect on Financing Large Construction Firms. A research project and paper submitted in partial fulfillment of the requirements for the Doctor of Management degree, May 1997.

Labor Foremen Preparedness Half-Day Seminars: Construction Contracts and Contract Drawings. Delivered under auspices of SIUE Labor and Management Programs Office, each February 1996-2000.

Maintenance Management Concepts in Construction Equipment Curricula. Lead author, published in Journal of Construction Education, Vol. II, No. 2 (Summer 1998) and orally presented at annual meeting of the Associated Schools of Construction, April 1997.

Pricing Competitively Bid Construction Projects. Featured Article (peer reviewed) in Cost Engineering journal (AACE I), November 1997.

Examination of the Program Curriculum of the Department of Construction in the School of Engineering at Southern Illinois University—Edwardsville. A research proposal submitted in partial fulfillment of the requirements for the Doctor of Management degree, October 1997.

Construction Program of Nashville District, Army Corps of Engineers. Presentation to Southeast Regional Meeting of Associated General Contractors, February 1993.

Construction in Turkey: the NATO Petroleum Pipeline System. Presentation to the Nashville Post of the Society of American Military Engineers, January 1993.

Construction Program of Nashville District, Army Corps of Engineers. Presentation to the Huntsville, AL, Post of the Society of American Military Engineers, November 1992.

Recommended Enhancements of the NATO Infrastructure Program in Turkey. Presentation to the NATO Infrastructure Conference, Izmir, Turkey, April 1992.

Congressional Record (various passages relating to optimization of equipment system integration). Also prepared narratives and compilations about equipment systems for Army general officer briefings to students of the Army War College and members of the Tampa Bay Chapter of the Association of the U.S. Army, 1987.

Engineer Officer Advanced Course: Making the Army's Best Better! (enhancements of post baccalaureate managerial and technical instruction for Army Engineer captains).
Explosives Logistics and Graded Filter Drainage (professional development problems) for Engineer Magazine, 1985 87.

Team Leader Handbook (a 20 page guide for newly assigned Army Engineer School Team Leaders about what they should be, know, and do to be effective in their teaching/coaching duties). Also served as an Army Engineer School faculty reviewer for these Army Field Manuals:
• FM 5 335, Drainage, 1985
• FM 5 541, Military Soils Engineering, 1986
• FM 5 742, Concrete and Masonry, 1985

Design and Construction with Geotextiles. Literature review project in partial fulfillment of requirements for M.S.C.E., as a graduate student, University of Missouri  Rolla, 1983.
 

Mark Shaurette

Full articles in refereed journals:    

  1. Shaurette, M. (2011). Safety and Health Education for Demolition and Reconstruction. Institution of Civil Engineers Journal Management Procurement and Law, 162(MP3). 10 pages, doi: 10.1680/mpal.9.00075 (nominated for 2011 ICE best paper award)
  2. Shaurette*, M. and Koch, D. (2009). WIP: Utilizing webcam technology to bring students into the field. The Technology Interface Journal, 9(2). (renamed Technology Interface International Journal). 15 pages

Full articles in reviewed journals:

  1. Shaurette, Mark. (2006). Demolition contractors’ perceptions of impediments to salvage and reuse of wood structural components. Journal of Green Building, 1(2), 145-163.
  2. Conference or symposium refereed proceedings:
  3. Scott*, L. and Shaurette*, M. (2012). Toward an Understanding of Research Fundamentals to Support Graduate Education in the Built Environment. CIB International Conference on Management of Construction: Research to Practice. Montreal, Canada. 12 pages
  4. Hutzel*, W.J., Loss, B. and Shaurette*, M. (2012). Competing in the 2011 Solar Decathlon. Proceedings of the American Society for Engineering Education, 2012 Annual Conference & Exposition, San Antonio, TX. 12 pages
  5. Cox, R.F., Huang*, Q., Shaurette, M., Wang, J. (2012). Intelligent Building Hazard Detection Using Wireless Sensor Network and Machine Learning Techniques. ASCE International Conference on Computing in Civil Engineering, Clearwater Beach, FL. 8 pages
  6. Chen*, Y. and Shaurette*, M. (2012). The Learning Cycle of an International Graduate Student in Construction Job Shadowing.  Associated Schools of Construction, International Proceedings of the 48th Annual Conference, Birmingham, UK. 8 pages
  7. Holt*, E.A., Kelting *, S. and Shaurette, M. (2012). Incorporating the Certified Green Professional (CGP) Designation into a University Residential Construction Management Specialization.  Associated Schools of Construction, International Proceedings of the 48th Annual Conference, Birmingham, UK. 7 pages
  8. Holt*, E.A., Loss*, B. and Shaurette, M. (2012). Students Involvement in the Solar Decathlon Competition: Giving Context to the Classroom Experience.  Associated Schools of Construction, International Proceedings of the 48th Annual Conference, Birmingham, UK. 7 pages
  9. Benhart*, B.L., and Shaurette*, M. (2012). Restructuring Purdue University’s Construction Management Curriculum Utilizing Graduate Competencies and American Council for Construction Education Standards.  Associated Schools of Construction, International Proceedings of the 48th Annual Conference, Birmingham, UK. 8 pages
  10. Shaurette*, M. (2012). Better Buildings Lafayette Indiana: The challenges to achieving energy market transformation under U.S. Department of Energy management. Proceedings of the Retrofit 2012 Conference. Salford, UK. 10 pages
  11. Huang*, Q., Li, X., Shaurette, M., Cox, R.F. (2011). A Novel Sensor Network Architecture for Intelligent Building Environment Monitoring and Management. Computing in Civil Engineering Proceedings of the 2011 ASCE International Workshop on Computing in Civil Engineering, Miami, FL. 8 pages, doi:10.1061/41182(416)1
  12. Hutzel*, W.J., Kilmer, W.H., Kilmer, R.L., Qian, Z.Y., Cory, C.A., Horton, T., Shaurette, M., and Hassan, R.P. (2011). Preparing for the 2011 Solar Decathlon. Proceedings of the American Society for Engineering Education, 2011 Annual Conference & Exposition, Vancouver, BC. 9 pages
  13. Shaurette*, M., and Orczyk*, J.J. (2011). Overcoming the Challenges of Distance Education Delivery of a Master of Science Degree in Construction Management. Proceedings of the American Society for Engineering Education, 2011 Annual Conference & Exposition, Vancouver, BC. 10 pages
  14. Benhart*, B.L., and Shaurette*, M. (2011). Establishing New Graduate Competencies:  Ensuring that Construction Management Curriculums are Delivering “Job-Ready” Employees.  Associated Schools of Construction, International Proceedings of the 47th Annual Conference, Omaha, NE. 7 pages
  15. Huang*, Q., Li, X., Shaurette, M., and Cox, R.F. (2011). A Novel Sensor Network Architecture for Intelligent Building Environment Monitoring and Management. Proceedings of the ASCE 2011 Workshop of Computing in Civil Engineering. Miami, Fl. 8 pages
  16. Huang*, Q., Lu, C., and Shaurette, M. (2010). Feasibility Study of Indoor Light Energy Harvesting for Intelligent Building Environment Management. Proceedings of the International High Performance Buildings Conference, Purdue University, West Lafayette, IN. 6 pages
  17. Shaurette, M. (2010). Simulation Tools to Support Energy Efficient Retrofit of Small Commercial Buildings. Proceedings of the International Society for Computing in Civil and Building Engineering (ISCCBE) 2010, Nottingham, UK. 6 pages
  18. Shaurette, M. (2010). The Emergent Necessity for Demolition and Reconstruction Content in the Construction Technology Curriculum. Proceedings of the American Society for Engineering Education, 2010 Annual Conference & Exposition, Louisville, KY. 11 pages
  19. Lower*, J.A. and Shaurette, M. (2010). Students’ Knowledge of Instructors and its Impact on Student Motivation. Proceedings of the American Society for Engineering Education, 2010 Annual Conference & Exposition, Louisville, KY. 11 pages
  20. Lower*, J.A. and Shaurette, M. (2010). The Importance of Global Construction in a Graduate Construction Program.  Associated Schools of Construction, International Proceedings of the 46th Annual Conference, Boston, MA. 7 pages
  21. Shaurette, M. (2010). Faculty Internship in Demolition Management: Advancing and reinforcing construction management education.  Associated Schools of Construction, International Proceedings of the 46th Annual Conference, Boston, MA. 7 pages
  22. Shaurette, M. (2009). Using Action Research to Refine Demolition Curriculum for Construction Management Students.  Associated Schools of Construction, International Proceedings of the 45th Annual Conference, Gainesville, FL. 6 pages
  23. Shaurette, M. (2008). Implementation of Wireless Webcam Technology for Construction Management Field Trips. Proceedings of the American Society for Engineering Education, 2008 Annual Conference & Exposition, Pittsburgh, PA. 18 pages
  24. Shaurette, M. (2007). Assessment of Wireless Webcam Technology for Construction Management Field Trips. Associated Schools of Construction, International Proceedings of the 43rd Annual Conference, Flagstaff, AZ. 10 pages
  25. Behling*, K. and Shaurette*, M. (2007). Engaging Practitioners in the Development and Delivery of Demolition Courses. Associated Schools of Construction, International Proceedings of the 43rd Annual Conference, Flagstaff, AZ. 7 pages
  26. Behling*, K. and Shaurette*, M. (2006). Development of a Construction Management Specialization in Demolition and Reconstruction. Proceedings of the American Society for Engineering Education, 2006 Annual Conference & Exposition, Chicago, IL. 10 pages
  27. Shaurette*, M. and Behling, K. (2006). Introduction to Demolition and Reconstruction Management: The initial course offering of Purdue University’s most recent area of specialization. Associated Schools of Construction, International Proceedings of the 42nd Annual Conference. Fort Collins, CO. 7 pages

 

Invited publications and scholarly presentations

  1. Retrofit for the residential and social housing sector. (March, 2012). National Retrofits Conference 2012. Royal Marine Hotel, Dun Laoghaire, Co Dublin, Ireland.
  2. Energy Conservation First (November, 2009). Presentation at the Purdue Extension Professional Development Conference, Energy & Sustainability Session
  3. Peterson*, E., Shaurette*, M., and Clark, D. (2009). Demolition Dust: Hazards and control. C&D World, 2(3). 46-52. Presented by Edwin Peterson at a seminar for the Institute of Demolition Engineers on October 3, 2008 in London, England.
  4. Construction Equipment: Cost of Ownership & Rent vs. Buy Decisions (November, 2008). Presented at the Construction Advancement Foundation, a northwest Indiana association of union commercial, industrial, and civil contactors. All presentation evaluations rated quality above average or excellent.
  5. Assessment of Wireless Webcam Technology for Construction Management Field Trips. (April 2007). At the tenth annual Purdue Teaching and Learning with Technology (TLT) Conference.
  6. Assessment of Web-Cam Technology on Teaching and Learning in Construction Management Education. (March 2006). At the ninth annual Purdue Teaching and Learning with Technology (TLT) Conference.

Textbooks

  1. Diven, R.J. and Shaurette, M. (2010). Demolition: Practices, Technology, and Management. West Lafayette, IN: Purdue University Press. ISBN: 978-1-55753-567-2 
  2. Shaurette, Mark. (2009). Wireless Webcam Field Trips: Construction students tour jobsites without leaving the classroom. Saarbrücken Germany: VDM Verlag Dr. Müller. ISBN-10: 3639110056

Workshops

  1. Net Zero Energy Homes – July 2012 short course for the Herrick Laboratory, High Performance Building Conference (3 hour building envelope session)

Department: Engineering Technology

M. Creasy

Journal Publications

Creasy, M. Austin, Eric C. Freeman, Michael K. Philen, and Donald J. Leo. "Deterministic model of biomolecular networks with stimuli-responsive properties." Journal of Intelligent Material Systems and Structures (2014): 1045389X14536004.

Creasy, M. Austin and Donald J. Leo. “Non-invasive measurement techniques for measuring properties of droplet interface bilayers,” Journal of Smart Materials and Structures, 19 (2010), 094016.

Creasy, M. Austin, Donald J. Leo, and Kevin M. Farinholt. “Adaptive collocated feedback for noise absorption in payload fairings,” Journal of Spacecraft and Rockets, 45(3) (2008), pp. 592-599.

Creasy, M. Austin, Donald J. Leo, and Kevin M. Farinholt. “Adaptive positive position feedback for actively absorbing energy in acoustic cavities,” Journal of Sound and Vibration, 311 (2008), pp. 461-472.

Conference Publications

Creasy, M. Austin.  "How Do You Teach Vibrations to Technology Students?"  2014 ASEE Annual Conference, Indianapolis, Indiana.

Creasy, M. Austin and Nicole Otte. "Team-Teaching Secondary STEM Courses," 2014 ASEE Annual Conference, Indianapolis, Indiana.

Creasy, M. Austin and Joseph P. Fuehne.  "The Seamless Pathway: A Partnership Between Community, Industry, and Academia,"  2014 ASEE Annual Conference, Indianapolis, Indiana.

Creasy, M. Austin.  "Hybrid Class Experiences: Flipping Mechanics Courses and Homework Feedback,"  ASEE Illinois-Indiana Section Conference 2014, Terre Haute, Indiana.

Creasy, M. Austin and David Lyle.  "Tolerances in Plastics."  NCSL International Workshop Symposium 2014, Orlando, Florida.

Joseph Fuehne

Journals

  1. Fuehne, J. P. (2008). Case Study: University-Industry Partnership to Educate Calibration Technicians and Improve Data Quality. The Journal for Quality and Participation, 31, 2, 27 - 30.(3)               Dues*, J., Fuehne*, J., Cooley, T., Denton, N., and Kraebber, H. (2008, in press). Assessment for continuous improvement: embedding it in the culture. Journal of Engineering Technology (JET), 28-2, 20 p.(5)               Fuehne*, J.P., and Engblom, J.J. (1992). A finite element / penalty function method for computing stresses near debonds. AIAA Journal, 30, 1625 – 1631.
  2. Fuehne*, J.P., and Engblom, J.J. (1989). A shear-deformable, doubly-curved finite element for the analysis of laminated composite structures. Composite Structures, 12, 81 – 95. DOI: 10.1016/0263-8223(89)90083-4.
  3. Engblom*, J.J., Fuehne, J.P., and Hamdallah, J.M. (1989) Transverse stress calculations for laminated composite shell structures using plate/shell finite element formulations”, Journal of Reinforced Plastics and Composites, 8, 446 – 457. DOI: 10.1177/073168448900800503.
  4. Fuehne*, J., and Baird, K. (2008). A Multi-Disciplinary Summer Camp: LEGO™ Mindstorms for Students and Teachers. the Technology Interface, Submitted October 7, 2008, Under Review.

Refereed Conference Proceedings

  1. Fuehne, J. (2010). Integrating mechatronics into an engineering technology curriculum. Proceedings of the 2010 International Mechanical Engineering Congress and Exposition, Vancouver, British Columbia, Canada.
  2. Fuehne, J. (2010). The Boiler Tech Challenge: A fun competition and recruiting tool for engineering technology programs. Proceedings of the 2010 International Mechanical Engineering Congress and Exposition, Vancouver, British Columbia, Canada.
  3. Fuehne, J. (2010). Developing a system approach for the engineering technology classroom. Proceedings of the 2010 International Mechanical Engineering Congress and Exposition, Vancouver, British Columbia, Canada.
  4. Fuehne, J. (2010). Virtual lab activities for a distance course in fluid power. Proceedings of the 2010 International Mechanical Engineering Congress and Exposition, Vancouver, British Columbia, Canada.
  5. Fuehne, J. (2008). Integrating Virtual Lab Simulation Software into an MET Program. Proceedings of the 2008 NAIT-IJME Conference, Nashville, Tennessee. Also being considered for re-publication in a refereed international IAJC journal such as the International Journal of Modern Engineering or the Technology Interface.Fuehne, J. (2008). Evolution of an Engineering Technology Outreach Program. Proceedings of the 2008 ASEE Annual Conference, Pittsburgh, Pennsylvania.
  6. Denton*, N., Kraebber*, H., Fuehne, J., Cooley, T., and Dues, J. (2007). The TC2K visit is done – now what?. Proceedings of the 2007 ASEE Annual Conference, Honolulu, HI, 9 p. Retrieve from http://www.asee.org/acPapers/AC%202007Full1687.pdf.
  7. Fuehne, J. (2006). Embedding multiple assessments in classroom activities. Proceedings of the 2006 International Mechanical Engineering Congress and Exposition, No. IMECE2006-13947, Presented November, 2006.
  8. Fuehne*, J., and Lenart, D. (2005).  Technology-hospital collaboration in thermodynamics: Experience with actual student projects. Proceedings of ASEE Annual Conference: The Changing Landscape of Engineering and Technology Education, Portland, Oregon. Retrieve from http://www.asee.org/acPapers/2005-298_Final.pdf.
  9. Ratcliff*, M. and Fuehne, J. (2006). Partnering with a neighborhood association to bring technology to as-risk urban students. Proceedings of the ASEE Annual Conference, Chicago, Illinois. Retrieve from http://www.asee.org/acPapers/code/getPaper.cfm?paperID=11237&pdf=2006Ful....
  10. Fuehne*, J., and Phillips, J. (2004). Introducing technology using LEGOs to at-risk and minority elementary students. Proceedings of ASEE Annual Conference: Engineering Education Reaches New Heights, Salt Lake City, Utah. Retrieve from http://www.asee.org/acPapers/2004-923_Final.pdf.
  11. Fuehne*, J., Taylor, W., Kim, J. and Lee, J.K. (2000). A predictive model for catalytic converter mat material, Proceedings of the Society of Automotive Engineers Congress, Detroit, Michigan.
  12. Fuehne*, J. and Engblom, J. (1991). A finite element / penalty function method for computing stresses near debonds. Proceedings of the 32nd SDM Conference, Baltimore, Maryland.
  13. Fuehne*, J. and Engblom, J. (1989). A shear deformable finite element penalty formulation for predicting transverse shear stresses in thick composite structures. Proceedings of the 4th Technical Conference on Composite Materials, Blacksburg, Virginia.
  14. Fuehne*, J. and Tippey, D. (1983).  Noseboom position error prediction data base update. Proceedings of the 14th Annual Symposium of the Society of Flight Test Engineers, Newport Beach, California.
José Garcia Bravo

Peer Reviewed Journal Articles

  1. Garcia,J., Martini,A., “Measured and Predicted Static Friction for Real Rough Surfaces in Point Contact”, ASME Journal of Tribology, Vol. 134. July, 2012. 031501 DOI: 10.1115/1.4006917
  2. Michael,P., Garcia,J., Bair,S., Devlin,M., Martini,A., “Lubricant chemistry and rheology effects on hydraulic motor starting efficiency”, Tribology Transactions, 55-5, pp 549-557, 2012. DOI: 10.1080/10402004.2012.680208
  3. Garcia,J., Lumkes,J., Heckaman,B., Martini,A., "Viscosity dependence of static friction in lubricated metallic line contacts", Tribology Transactions, 54-3,pp. 333-340, 2011.DOI: 10.1080/10402004.2010.542278.

Articles in Conference Proceedings

  1. Kuleshov, A., Garcia, J., Lumkes, J., (2014)“Low cost water/air hydraulic trainer and curriculum for K-12 students”. ASEE Annual Conference and Exposition June 15-18, 2014, Indianapolis, Indiana, USA.
  2. Pindera, M.Z., Sun, Y., Malosse, J-J, Garcia J., (2013), “Co-Simulation Based Design and Experimental Validation Of Control Strategies For Digital Fluid Power Systems”, FPMC2013-4489, Proceedings Of The ASME/BATH 2013 Symposium on Fluid Power & Motion Control FPMC2013 October 6-9, 2013, Sarasota, Florida, USA
  3. Garcia, J., Martini, A. and Lumkes, J., “Static friction characterization of metallic contacts with hydraulic fluids”, Proceedings of the 52nd national conference on Fluid Power, Las Vegas, NV, USA, March 21-22, 2011
  4. Garcia, J., Krutz, G. and Lumkes, J., "Self-Propelled Water Hydraulics Vehicle", Proceedings of the 10th Scandinavian International Conference on Fluid Power, Tampere, Finland, May 21-23, 2007.
  5. Yang, Z., Krishnamurthy, M., Garcia J., “Modeling and Control of a Continuously Variable Planetary Transmission for a Small Wind Turbine Drivetrain”, (SMASIS 2013), Proceedings of the ASME 2013 Conference on Smart Materials, Adaptive Structures and Intelligent Systems, Snowbird UT, September 16-18, 2013.
  6. M. Alvarez, H. Cease, B. Flaugher, R. Flores, J. Garcia, A. Lathrop, and F. Ruiz., “The Development of a Cryogenic Over-Pressure Pump”, 2013 Cryogenic Engineering Conference and International Cryogenic Materials Conference., Anchorage, Alaska. June 17 – 21, 2013.
  7. Sun, Y., Garcia, J., Krishnamurthy, M. “A novel fixed displacement Electric-Hydraulic Hybrid (EH2) drivetrain for city vehicles”, Transportation Electrification Conference and Expo (ITEC), 2013 IEEE, Detroit, Michigan, June 16-19, 2013. DOI: 10.1109/ITEC.2013.6574499
  8. Mishler, L., Garcia, J. and Lumkes, J., “Engaging Pre-College Students in Engineering Using Hands-on Micro- Processor Controlled Portable Fluid Power Demonstrators”, ASABE Annual International Meeting, Louisville, Kentucky, August 8-10, 2011. Paper No. 1111500
  9. Garcia, J., Martini, A., and Lumkes, J., "Experimental Measurements of Static Friction for Line Contacts at High Speed Step Inputs ", Proceedings of the 6th FPNI PhD Symposium, West Lafayette, IN, USA, June 15-19 2010.
  10. Michael, P., Burgess, K., Martini, A., Garcia, J., Bair, S., “Lubricant effects in hydraulic motor staring efficiency”, Proceedings of the STLE/ASME 2010 International Joint Tribology Conference. San Francisco, CA, October 17-20, 2010.

OTHER PUBLICATIONS

  1. Garcia. J., Krishnamurthy. M., (2014) “Electric-Hydraulic Drivetrain for City Vehicle: A novel Approach to On-Board Energy Storage”, IEEE Transportation Electrification Initiative, Submitted, January 20, 2014.
  2. Garcia, J., Mishler, L., Lumkes, J., “Dig this Hydraulic/Pneumatic robot backhoe”, Robot Magazine, Dec. 3, 2010, No. 28.
  3. Garcia, J., Martini,A., and Lumkes, J., “Experimental Measurement of Surface and Fluid Effects on Static Friction for Metal Contacts” Tribology & Lubrication Technology (TLT) Magazine. March 2010, Vol. 66, No. 3. 
Tatiana Goris
  1. Goris, T.V., & Dyrenfurth, M. J. (2012) Concepts and Misconceptions in Engineering, Technology, and Science. Overview of Research Literature. ASEE Illinois/Indiana Section Conference, Valparaiso University, Valparaiso IN, March 17th. http://ilin.asee.org/Conference2012/Papers/Goris.pdf
  2. Goris, T. V., & Dyrenfurth, M. J. (2011) Work in Progress- Analysis of Misconceptions of Engineering Technology Students About Electrical Technology Concepts. A Mixed Method Study. Paper presented at the FIE IEEE Annual Conference, Rapid City, SD, October 12-15. Session T4J. http://fie-conference.org/fie2011/sessions/T4J.htm
  3. Budyakov, V.V., & Goris T.V. (2010). Occurrence of Misconceptions and the Ways of Its Overcoming (In Russian). In Aspects of Industrial Development and Modernization of Education. Don State Technical University, Russia. ISBN 978-5-7509-1273-5.
  4. Goris, T. V., & Dyrenfurth, M. J. (2010) Students’ Misconceptions in Science, Technology and Engineering. Paper presented at the ASEE Illinois/Indiana Section Conference, Purdue University, West Lafayette, In. http://ilin.asee.org/Conference2010/Papers2010.html
  5. Goris, T.V., (2010). Book review: Thomas Kuhn, The Structure of Scientific Revolutions. Spring 2010 ASEE Student Newsletter. http://students.asee.org/?p=311

 

Qingyou Han

Journals

  1. Z. Liu, M. Rakita, W. Xu, X. Wang, and Q. Han, “Ultrasound Assisted Combustion Synthesis of Al-Ti-C System,”  Ultrasonics Sonochemistry,  (2015), accepted.

  2. Fei Yin, Qingyou Han, Milan Rakita, Meng Wang, Lin Hua, Chuansheng Wang. Numerical modeling and experimental approach for shot velocity evaluation during ultrasonic shot peening, International Journal of Computational Materials Science and Surface Engineering, 2014.(accepted)

  3. Q. Han, “Ultrasonic Processing of Materials,” Metallurgical and Materials Transaction B, (2015), accepted.

  4. X. Wang, and Q. Han , “On the Understanding of Aluminum Grain Refinement by Al-Ti-B Type Mater Alloys,” Metallurgical and Materials Transaction B, Accepted. (2015)

  5. Z. Liu, M. Rakita, W. Xu, X. Wang, and Q. Han, “Ultrasound Assisted Salts-Metal Reaction for Synthesizing TiB2 Particles at Low Temperatures,” Chemical Engineering Journal, 263 (2015), pp. 317-324.

  6. F. Yin, L. Hua, X. Wang, M. Rakita, and Q. Han, “Numerical Modeling and Experimental Approach for Surface Morphology Evaluation during Ultrasonic Shot Peening,” Computational Materials Science, 92 (2014) pp. 28-35.

  7. F. Yin, S. Hu, L. Hua, X. Wang, S. Suslov, and Q. Han, “Surface Nanocrystallization and Numerical Modeling of Low Carbon Steel by Means of Ultrasonic Shot Peening,” Metallurgical and Materials Transactions A46 (3), (2014), pp. 1253-1261.

  8. X. Wang, and Q. Han, “Relationships of Diboride Phases in Al-Ti(Zr)-B Alloys,” Materials Science and Technology, 31, No. 7 (2015) pp. 874-879.

  9. Q. Han, “Ultrasonic Degassing of Aluminum Alloys,” Materials Science Forum, vols. 783-786 (2014), pp. 155-160.

  10. M. Wang and Q. Han, “Particle Pushing during Solidification of Metals and Alloys,” Materials Science Forum, vols. 783-786 (2014), pp. 1513-1517.

  11. Wang, X., Jiang, L., Luo, A., Song, J., Liu, Z., Yin, F., Han, Q., Yue, S., and Jonas, J.J., “Deformation of Twins in a Magnesium Alloy under Tension at Room Temperature,” Alloys and Compounds, 2014, vol. 594, 44-47.

  12. Z.W. Liu, X.M. Wang, Q. Han*, and J.G. Li, Effect of ultrasonic vibration on direct reaction between solid Ti powders and liquid Al. Metallurgical and Materials Transactions A, 45(2014), pp.543-546.

  13. Z.W. Liu, X.M. Wang, Q. Han*, and J.G. Li, “Effects of the addition of Ti powders on the microstructure and mechanical properties of A356 alloy,” Powder Technology, 253(2014), pp.751-756.

  14. Z.W. Liu, X.M. Wang, Q. Han*, and J.G. Li, “Synthesis of submicron sized TiC particles in aluminum melt at low melting temperature,” Journal of Materials Research, vol. 29, 2014, issue 07, pp. 896-901.

  15. Z.W. Liu, M. Rakita, X. Wang, W. Xu, and Q. Han, “In Situ Formed Al3Ti Particles in AL Alloy Matrix and Their Effects on the Microstructure and Mechanical Properties of 7075 Alloy,” Journal of Materials Research, vol. 29, 2014, issue 12, pp. 1354-1361.

  16. C. Song, K. Li, K. Xie, W. Liu, S. Zhao, Q. Han, and Q. Zhai, “The Effect of the Nucleation Ability on Solidified Microstructures of Gas-Atomized Fe-6.5 wt.%Si Alloy Powder,” Powder Technology, 263 (2014) pp. 31-36.

  17. Liu, Z.W., Han*, Q., & Li, J.G. (2013). Fabrication of in situ Al3Ti/Al composites by Using Ultrasound Assisted Direct Reaction between Solid Ti Powders and Liquid Al. Powder Technology, 247: pp. 55-59.

  18. Liu Y., Han* Q., Hua L., & Xu C. (2013). Numerical and Experimental Investigation of Upsetting with Ultrasonic Vibration of Pure Copper Cone Tip. Ultrasonics, 53(1), 803-807.

  19. Xu, C., Cui, Y., & Han. (2013). Q. Severe Plastic Deformation of Steel Induced by Ultrasonic Vibrations. Open Journal of Metal, 3, pp.1-5.

  20. Rakita, M., Liu, Y., Yin, F., Wang, M., & Han, Q. (2013). Ultrasonic Shot Peening. International Journal of Computational Materials Science and Surface Engineering, 5, No. 3, 189-209.

  21. X. Jian, and Q. Han, “Formation of Hypereutectic Silicon Particles in Hypoeutectic Al-Si Alloys under the Influence of High-Intensity Ultrasonic Vibration,” China Foundry, 2013, vol. 10 (2), pp. 118-123.

  22. Y. Liu, S. Suslov, Q. Han, L. Hua, and C. Xu, “Comparison Between Ultrasonic Vibration Assisted Upsetting and Conventional Upsetting,” Metall. Mater. Transactions, 44A, (2013), (7), pp. 3232-3244.

  23. C. Song, Y. Guo, K. Li, F. Sun, Q. Han, and Q. Zhai, “In-situ Observation of Phase Transformation and Structure Evolution of a 12 pct Cr Ferritic Stainless Steel,” Metall. Mater. Transactions, 43B, October, (2012), pp. 1127-1137.

  24. Z.W. Liu, Q. Han, and J.G. Li, “Formation of Small Blocky Al3Ti Particles via Direct Reaction between Solid Ti Powders and Liquid Al,” Metall. Mater. Transactions, 43A, n12, (2012), pp. 4460-4463.

  25. Z.W. Liu, Q. Han, J. G. Li, “A Developed Method for Producing in situ TiC/Al Composites by Using Quick Preheating Treatment and Ultrasonic Vibration,” Composites B(IF: 1.73), 43(5), (2012), pp. 2429-2433.

  26. Z.W. Liu, Q. Han, J. G. Li, “A Developed Method for Fabricating in situ TiCp/Mg Composites by Using Quick Preheating Treatment and Ultrasonic Vibration,” Metall. Mater. Transactions 43A (2012), pp.2116-2124. (IF: 1.545)

  27. Z.W. Liu, Q. Han, J. G. Li, “Effect of Ultrasonic Vibration on Microstructural Evolution of the Reinforcements and Degassing of in situ TiB2p/Al-12Si-4Cu Composites,” Journal of Materials Processing Technology(IF: 1.78),” 212 (2012), pp. 365-371.

  28. J. Song, T. Denouden, and Q. Han, “Mechanisms of Soldering Formation on Coated Core Pins,” Metall. Mater. Trans 43A (2012), pp. 415-421.

  29. Z.J. Zuo, Q. Han, and M. Dai, “The Analysis of Stiffness Condition in Rolling Thin-Walled Ring,” Applied Mechanics and Materials, 157-158 (2012), pp. 702-705.

  30. Y. Liu, S. Suslov, Q. Han, C. Xu, and L. Hua, “Microstructure of the Pure Copper Produced by Upsetting with Ultrasonic Vibration,” Materials Letters, vol. 67 (2012), pp. 52-55.

  31. Z.W. Liu, Q. Han, J. G. Li, “Ultrasound Assisted in situ Technique for the Synthesis of Particulate Reinforced Aluminum Matrix Composites,” Composites: Part B Engineering, vol. 42 (2011), pp. 2080-2084.

  32. Z.W. Liu, M. Rakita, Q. Han, and J.G. Li, “Microstructural Evolution of Reinforcements in the Remelting in situ TiV/Al-12Si Composites Treated by Ultrasonic Vibration,” Materials Research Bulletin (IF 2.1), vol. 46 (2011), pp. 1674-1678.

  33. C. Song, Y. Guo, Y. Zhang, H. Zheng, M. Yan, Q. Han, and Q. Zhai, “Effects of Currents on the Microstructure of Directionally Solidified Al-4.5 wt% Cu Alloy,” Journal of Crystal Growth, 324 (2011) pp.235-242.(IF:1.726)

  34. Y. Zhang, C. Song, L. Zhu, H. Zheng, H. Zhong, Q. Han, and Q. Zhai, “Influence of Electric-Current Pulse Treatment on the Formation of Regular Eutectic Morphology in an Al-Si Eutectic Alloy,” Metall. Mater. Trans 42B (2011), pp. 604-611.

  35. C. Allen, and Q. Han, “Grain Refinement of Pure Aluminum Using Ultrasonics,” International Journal of Metalcasting, 5 (2011), No.1, pp.69-70.

  36. Q. Han, H. Xu, P.P. Ried, and P. Olson, “Accelerated Method for Testing Soldering Tendency of Core Pins,” International Journal of Cast Metals Research, 23 (2010), Issue 5, pp. 296-302.

  37. Q. Cheng, S. Wang, and Q. Han, “Novel Process for Isolating Fibrils from Cellulose Fibers by High-Intensity Ultrasonication. II. Fibril Characterization,” Journal of Applied Polymer Science, 115 (2010), Issue 5, pp. 2756-2762.

  38. Y. Dai, M. Yang, C. Song, Q. Han, and Q. Zhai, “Solidification Structure of C2.08Cr25.43Si1.19Mn0.43Fe70.87 Powders Fabricated by High Pressure Gas Atomization,” Materials Characterization, 61 (2010), issue 1, pp. 116-122.

  39. D.M. Gao, Z.J. Li, Q. Han, and Q.J. Zhai, “Effects of Ultrasonic Power on Microstructure and Properties of AZ91 Alloy,” Materials Science and Engineering A, 502 (2009), issues 1-2, pp. 2-5.

  40. C.J. Song, Q. Han, and Q.J. Zhai, “Review of Grain Refinement Methods for As-Cast Microstructure of Magnesium Alloy,” China Foundry, 6 (2009), issue 2, pp. 93-103.

  41. F. He, Q. Han, and M. Jackson, “Nanoparticulate Reiforced Metal Matrix Nanocomposites – A Review,” International Journal of Nanoparticles, 1 (2008), issue 4, pp. 301-309.

  42. S. Zhang, Z.K. Liu, and Q. Han, “Thermodynamic Modeling of the Succinonitrile-Water System,” Journal of Phase Equilibria and Diffusion, 29 (2008), pp. 247-251.

  43. H. Xu, Q. Han, and T.T. Meek, “Effects of Ultrasonic Vibration on Degassing of Aluminum Alloys,” Materials Science and Engineering A, 473 (2008), issues 1-2, pp.96-104.

  44. S. Zhang, Q. Han, and Z.K. Liu, “Thermodynamic Investigation of Alkali-Metal-Induced High Temperature Embrittlement in Al-Li Alloys,” Advanced Engineering Materials, 9 (2007), No.11, pp.981-986.
  45. S. Zhang, Q. Han, and Z.K. Liu, “Fundamental Understanding of Na-Induced High Temperature Embrittlement in Al-Mg Alloys,” Philosophical Magazine, 2007, vol. 87, no. 1, pp.147-157.
  46. Y. Cui, C. Xu, and Q. Han, “Microstructure Improvement in Weld Metal Using Ultrasonic Vibrations,” Advanced Engineering Materials, 9 (2007), No.3, pp. 161-163.
  47. H. Xu, T.T. Meek, and Q. Han, “Effects of Ultrasonic Field and Vacuum on Degassing of Molten Aluminum Alloy,” Materials Letters, 61 (2007), No. 4-5, pp. 1246-1250.
  48. Y. Cui, C.L. Xu, and Q. Han, “A Method of Eliminating the Unmixed Zone in AL-6XN Alloy Welds,” Scripta Materialia., 2006, vol.55, No.11, pp. 975-978.
  49. Q. Han, “Motion of Bubbles in the Mushy Zone,” Scripta Materialia., 2006, vol.55, No.10, pp. 871-874.
  50. S.J. Zhang, Q. Han, and Z.K. Liu, “Thermodynamic Modeling of the Al-Mg-Na System,” Journal of Alloys and Compounds, 2006, vol. 419, pp. 91-97.
  51. H. Xu, D.L. Xu, S. Zhang, and Q. Han, “Effect of the Alloy Composition on the Grain Refinement of Aluminum Alloys,” Scripta Materialia., 2006, vol. 54, n12, pp. 2191-2196.
  52. C. Xu, Z. Jia, D. Wu, Q. Han, and T.T. Meek, “Fabrication of nylon-6/Carbon Nanotube Composites,” Journal of Electronic Materials, 2006, Vol. 35, No. 5, p.954-957.
  53. C. Xu, J. Chen, Y. Cui, Q. Han, H. Coo, K. Liaw, and D. Wu, “Influence of the Surface Treatment on the Deposition of Platinum Nanoparticles on the Carbon Nanotubes,” Advanced Engineering Materials, 2006, Vol. 8, No.1-2, pp.73-77.
  54. X. Jian, T.T. Meek, and Q. Han, “Refinement of Eutectic Silicon Phase of Aluminum A356 Alloy Using High-Intensity Ultrasonic Vibration,” Scripta Materialia., 2006, vol. 54, n5, pp. 893-896.
  55. S.J. Zhang, C. Brubaker, C. Jiang, M. Yang, Y. Zhong, Q. Han, and Z.K. Liu, “A Combined First-Principles Calculation and Thermodynamic Modeling of the F-K-Na System,” Materials Science and Engineering, A418 (2006), pp. 161-171.
  56. P.E. King, B.M. Golchert, T. Li, M. Hassan, and Q. Han, “Energy Efficient Operation of Aluminum Furnaces,” Aluminum World, Issue 9, 2006.
  57. Y. Cui, C.L. Xu, Q. Han, H. Choo, and P.K. Liaw, “Formation of Dendritic Nanotubes under an Electric Field,” Advanced Engineering Materials, vol. 7, No.9, 2005, pp.827-829.
  58. Q. Han, M.I. Hassan, S. Viswanathan, K. Saito, and S.K. Das, “The Reheating-Cooling Method: A Technique for Measuring Mechanical Properties in the Nonequilibrium Mushy Zones of Alloys,” Metall Mater Trans 36A, 2005, pp. 2073-2080.
  59. Q. Han, and H. Xu, “Fluidity of Alloys under High Pressure Die Casting Conditions,” Scripta Materialia., 2005, vol. 53, pp. 7-10.
  60. X. Jian, H. Xu., T.T. Meek, and Q. Han, “Effect of Power Ultrasound on Solidification of Aluminum A356 Alloy,” Materials Letters, vol. 59, issues 2-3, 2005, pp. 190-193.
  61. Q. Han, B.K. Kad, and S. Viswanathan, “The Design Perspective of Magnesium Die Casting Alloys,” Philosophical Magazine, vol. 84, issue 36, 2004, pp. 3843-60.
  62. Q. Han, and S. Viswanathan, “The use of thermodynamic simulation for the selection of hypoeutectic aluminum-silicon alloys for semi-solid metal processing,” Materials Science and Engineering A, v 364, n 1-2, Jan 15, 2004, pp. 48-54.
  63. Cailu Xu, Gongwei Wu, Zheng Liu, Dehai Wu, Thomas T. Meek, Qingyou Han, Preparation of copper nanoparticles on carbon nanotubes by electroless plating method, Materials Research Bulletin, 39 (2004), pp. 1499-1505.
  64. H. Xu, X. Jian, T.T. Meek, and Q. Han, “Degassing of Molten Aluminum A356 Alloy Using Ultrasonic Vibration,” Materials Letters, v 58/29, 2004, pp. 3668-3672.
  65. Q. Han, J. Zeh, E. Hatfield, V.K. Sikka, “Dross formation during remelting of aluminum 5182 remelt secondary ingot (RSI),” Materials Science and Engineering A, v 363, n 1-2, Dec 20, 2003, pp. 9-14.
  66. Q. Han, A.J. Duncan, and S. Viswanathan, “Permeability Measurements of the Flow of Interdendritic Liquid in Equiaxed Aluminum-Silicon Alloys,” Metall. Mater. Trans., 34B (2003), pp. 25-28.
  67. Q. Han, and S. Viswanathan, “Analysis of the Mechanism of Die Soldering in Aluminum Die Casting,” Metall. Mater. Trans., 34A (2003), pp. 139-46.
  68. Q. Han, and S. Viswanathan, “Hydrogen Evolution during Directional Solidification and Its Effect on Porosity Formation in Aluminum Alloys,” Metall. Mater. Trans., 33A (2002), pp.2067-2072.
  69. Q. Han, S. Viswanathan, D.L. Spainhower, and S.K. Das, “The Nature of Surface Cracking in DC Cast Aluminum Alloy Ingots,” Metall. Mater. Trans., 32A (2001), pp.2209-11.
  70. A.J. Duncan, Q. Han and S. Viswanathan: “Measurement of Liquid Permeability in the Mushy Zones of Aluminum-Copper Alloys,” Metall. Mater. Trans. 30B (1999), pp. 745-750
  71. X. Wan, Q. Han and J.D. Hunt: “A Diffusion Solution for the Melting/Dissolution of a Solid at Constant Temperature and Its Use for Measuring the Diffusion Coefficient in Liquids,” Metall. Mater. Trans. 29A (1998), pp. 751-755.
  72. Q. Han: “Interaction of Particles with a Freezing Front,” (Invited) “Current Topics in Crystal Growth Research” 4(1998), pp. 147-154.
  73. J.D. Hunt, Q. Han, and X. Wan, “Growth of a Cellular/Dendritic Array,” High Power Laser and Particle Beams, 9 (1997) No.1, pp. 161-172.

  74. Q. Han, H. Hu and X. Zhong: “Models for the isothermal Coarsening of the Secondary Dendrite arms in Multicomponent Alloys,” Metall Trans, 28B (1997), pp. 1185-1187.
  75. Q. Han and A. Hellawell: “Primary Particle Melting Rates and Equiaxed Grain Nucleation,” Metall Trans. 28B (1997), pp.169-173.
  76. X. Wan, Q. Han, and J.D. Hunt: “Experimental Studies on the Transition from Regular to Irregular Dendritic Growth,” Acta Metall Mater. 45 (1997), pp. 3975-3979.
  77. J.D. Hunt, Q. Han and X. Wan: “Growth of a Cellular/Dendritic Array,” (invited paper), J. Mater. Sci. Technol., 13 (1997) 161-172.
  78. Q. Han and J.D. Hunt: “Numerical Modeling of the Growth of a Cellular/Dendritic Array in Multi-component Alloys,” Matls Sci and Enging, A238 (1997), pp.192-195.
  79. Q. Han and J.D. Hunt: “Behavior of Particles near a Freezing Front,” Materials Review (Chinese), 10 (1996), pp.101-105.
  80. Q. Han, and J.D. Hunt: “On Particle Pushing During Solidification,” Acta Met. Sinica, 32 (1996) No.4, pp.1-6.
  81. X. Wan and Q. Han: “Theory of Array Growth of Cells/Dendrites,” Materials Review (Chinese), 10 (1996), pp.31-35.
  82. Q. Han, and J.D. Hunt: “Particle Pushing: The Critical Flow Speed Required to Put Particles Into Motion During Fluid Flow,” J. Crystal Growth, 152 (1995), pp. 221-227.
  83. Q. Han, and J.D. Hunt: “Redistribution of Particles during Solidification,” (Invited) ISIJ International (Special Issue on Recent Advances in Solidification), 35 (1995), pp. 693-699.
  84. Q. Han: “The Reasons for China’s Science & Technology Falling Behind the West in Modern Times,” Studies in Dialectics of Nature(Philosophy of Nature, Science and Technology, Science, Technology and Society)(Chinese), 11 (1995), No. 11, pp.9-14.
  85. Q. Han, and J.D. Hunt: “Particle Pushing: The Concentration of Particles near a Solid Interface During Fluid Flow,” J. Crystal Growth, 140 (1994), pp. 398-405.
  86. Q. Han, and J.D. Hunt: “Particle Pushing: The Attachment of Particles to the Solid-Liquid Interface During Fluid Flow,” J. Crystal Growth, 140 (1994), pp. 406-413.
  87. Q. Han, J.P. Lindsay, and J.D. Hunt: “The Effect of Fluid Flow on Particle Pushing,” Cast Metals, 6 (1994), pp. 237-.
  88. Q. Han: “The Phenomena of Particle Pushing and Its Mechanism,” Materials Review(Chinese), 8 (1994), pp. 91-96.
  89. Q. Han, and J.D. Hunt: “Particle Pushing: The Distribution of Particles in Liquid Near a Solid Surface,” Matls. Sci. and Enging, A173 (1993) pp.221-225.
  90. Q. Han, P. Wang, and H. Hu,: “Reducing the Aging Effect of Zinc Based Alloys,” J. BUST (in Chinese), 15 (8)  (1993), pp.

  91. X. Zhao, H. Hu, P. Wang, G. Yang, and Q. Han: “Microstructure and Properties of ZA-27TiRE Alloy,” Rare Metals, 4 (2) (1993), pp.

  92. Q. Han, C. Zen, and H. Hu: “The Effects of Rare Earth Elements on the Properties and the Structure of Cast ZA-27 Alloy,” J.BUIST (Chinese), 14 (1992), No.1, pp.42-48.
  93. Q. Han, and H. Hu: “An Experimental Investigation into the Modification of the Corrosion Resistance of the ZA-27 Alloy with Rare Earth Elements,” J. Chinese Rare Earth, 10 (1992), No.3, pp.243-245.
  94. Q. Han, and H. Hu: “A Parameter for Evaluating the Ability of Solute Elements on Grain Refinement in Aluminium Alloy,” Cast Metals, 2, (1989) No.3, pp. 123-126.
  95. Y. Li, Q. Han, and X. Zhong: “The Magnetic Permeability of High Mn Cast Iron,” Foundry (Chinese), 1990, No.6, pp. 5-8.
  96. Q. Han: “A Mathematical Model for the Fluidity of Alloys,” J. BUIST(Chinese), 11(1989), No.4, pp.312-317.
  97. Q. Han, and H. Hu: “A Parameter for Evaluating Grain Refinement of Solute Elements,” Acta Met. Sinica (in Chinese), 24 (1988) No. 5, pp.324-330.
  98. X. Zhong, and Q. Han: “Experimental Investigation Into the Possibility of Eliminating Annealing for Some Cast Iron Parts,” Foundry(Chinese), 1988, No.8, pp.22-24.
  99. X. Zhong. Q. Han, and W. Zhong: “The Influence of Macro-structure on the deformation of Gray Cast Iron,” Modern Casting (Chinese), 1988, No.1, pp.2-6.
  100. Q. Han, H. Hu, and X. Zhong: “The Effect of Ce on the Solidification Structure of Low Sulfur 16Mn Steel,” Acta Met. Sinica, 23 (1987), No.3, pp.176-181.
  101. Q. Han, H. Hu, and X. Zhong: “The Mathematical Models for the Isothermal Coarsening of Secondary Dendrite Arms,” Materials Science Progress (Chinese), 1 (1987), pp.33-39.
  102. H. Hu, X. Zhong, Q. Han, and L. Ma: “The Effect of Ce and Ca-Si on the Primary Solidification Structure of Low Sulfur 16Mn Steel,” Rare Earth (in Chinese), 13 (5).

  103. Q. Han, and H. Hu: “The Effect of Solute Content on the Secondary Dendrite Arm Spacings for Multi-component Alloys,” J. BUIST(Chinese), 7 (1985), No.1, pp.1-11.

Refereed Conference Proceedings

  1. Z. Liu, and Q. Han, “The Evolution of Solid Powders in Liquid Aluminum at Low Temperature and the Effects of Ultrasound on it,” Advanced Composites for Aerospace, Marine, and Land Application, eds.  (Warrendale, PA: The Minerals, Metals & Materials Society, 2015), Orlando, FL, March 15-20, 2015.

  2. V. Rundquist, K. Manchiraju, and Q, Han, “Ultrasonic Degassing and Processing of Aluminum Part II,” eds.  ,(Warrendale, PA: The Minerals, Metals & Materials Society, 2015), Orlando, FL, March 15-20, 2015.

  3. Q. Han (Keynotes), “Automotive Lightweight: Opportunities and Challengers,” MATS 2014, Wuhan University of Technology, October 25-26, 2014, Wuhan, China.

  4. Fei Yin, Qingyou Han, Lin Hua, Finite element modelling and microstructural evolution for multiple impacts during ultrasonic shot peening. 2014 International Conference on Modern Auto Technology and Services, October 25-26, Wuhan China.

  5. Q. Han (Keynotes), “Ultrasonic Processing of Materials,” 53rd Annual Conference of Metallurgists, Vancouver, Canada, September 28-October 1, 2014. Sponsored by MET-SOC CIM (Canadian Institute of Ming, Metallurgy and Petroleum)

  6. X. Wang, and Q. Han (Invited), “On the Understanding of Aluminum Grain Refinement by Al-Ti-B Type Mater Alloys,” Proceedings of the 53rd Annual Conference of Metallurgists, Vancouver, Canada, September 28-October 1, 2014.

  7. Q. Han (Invited), “Ultrasonic Processing of Metallic Materials,” The 2nd International Symposium on Frontier in materials Sciences and Engineering, Salt Lake City, August 3-6, 2014.

  8. Q. Han (Keynotes), “The Mechanism of Die Soldering in Aluminum Die Casting,” Proceedings of the 1st International Symposium on Nonferrous Alloys and Special Casting Technology, Shanghai, June 20-21, 2014 (Sponsored by Chinese Foundry Society).

  9. M. Wang, X. Wang, W. Xu, and Q. Han, “Thermodynamic Simulation to Reduce β-(AlFeSi) Phase Formation in A380 Alloy”, NADCA Transaction, 2014, T14-051, pp. 1-11, Milwaukee, USA

  10. X. Wang, Q. Han, S. long, Y. Li, and W. Li, “Vacuum assisted die filling and pressurized feeding for magnesium die casting”, NADCA Transaction, 2014, T14-xxx, pp. 1-6, Milwaukee, USA

  11. W. Dai, X.M. Wang, W. Zhao, and Q. Han “A Comparison of the Effects of Al-Ti-B Type of Grain Refiners from Different Makers on Pure Aluminum”, Light Metals 2014, TMS 2014,  San Diego, Feb. 17-20, 2014.

  12. M. Wang, and Q. Han (Invited), “On Particle Pushing during Solidification of Metals and Alloys”, Thermec 2013, Las Vegas, 6-9 December, 2013.

  13. Q. Han (Invited), “Ultrasonic Degassing of Aluminum Alloys,” Thermec 2013, Las Vegas, 6-9 December, 2013.

  14. C.M. Vian, W. Dai, and Q. Han, “Behavior of Bubbles during Solidification,”NADCA Transactions 2013, T13-013.

  15. M. Rakita, and Q. Han, “Strain Rate as a Predictor of Hot Tearing in AZ91D Magnesium Alloy,” AFS Transactions, Cast Expo & Metalcasting Congress, American Foundry Society, St. Louis, Missouri. April 6-9, 2013. Paper 13-1340.

  16. Q. Li, W. Su, W. Dai, and Q. Han, “Numerical Simulation of Fluidity and Molding Filling Characteristics of Magnesium Alloys during Vacuum Assisted Lost Foam Casting Process”. AFS Transactions, Cast Expo & Metalcasting Congress, American Foundry Society, St. Louis, Missouri. April 6-9, 2013. Paper 13-1513.

  17. Q. Han, “Motion of Bubbles in the Mushy Zone – A Neglected Physical Phenomenon,” (Invited). China Foundry Week 2012, Suzhou, China, October 17-19. Proceedings of the China Foundry Week 2012, Foundry Institution of Chinese Mechanical Engineering Society, 2012, p. 56.

  18. M. Wang, and Q. Han, “Particle Pushing or particle Segregation during Solidification. Advances in Metal Casting Technologies, MS&T 2012, October 7-11, Pittsburgh, PA. USA.

  19. M. Wang, D. Myers, and Q. Han, “Study on Microstructure Evolution during Self-pierce Riveting Process,” NADCA Transactions, The North American Diecasting Associations, 2012, T12-062.

  20. J. Song, T. DenOuden, and Q. Han, “The Coating Failure of Coated Core Pin during Die Casting Process,” NADCA Transactions, The North American Diecasting Associations, 2012, T12-081.

  21. Wu, W., Zhu*, M., Sun, D., Dai, T., Han, Q., & Raabe, D. (2012). Modeling of Dendritic Growth and Bubble Formation. MCWASP XIII 2012. (Modeling of Casting, Welding and Advanced Solidification Processes 2012). June 17-22, Styria, Austria.

  22. Q. Han, (2012), “Radical Motion of Bubbles in the Mushy Zone,”(Invited), Proceedings of the Frontier in Solidification Science and Processing Technology, Shanghai University, May 2012, Shanghai, China.

  23. Han, Q. (2012). Radical Motion of Bubbles in the Mushy Zone.  AFS Transactions, Columbus, OH, April 18-20.

  24. Y. Teng, Y. Yang, H. Yu, L. Wang, & W. Huang. (2012). Behavior of Bubbles under Directional Solidification Conditions. AFS Transactions, Columbus, OH, April 18-20.

  25. Liu, Y., Han, Q., & Hua, Lin (2012). Finite Element Simulation Analysis of the Ultrasonic Vibration Forging of an Aluminum Cylinder Workpiece. Light Metals 2012, pp. 256-264. Warrendale, PA: The Minerals, Metals & Materials Society, March 10-16, Orlando, FL.

  26. Song, J., & Han, Q. (2012). Study on the Effect of Ultrasonic Vibration on the Microstructure of As-Cast Hypereutectic Aluminum Alloys. Light Metals 2012, Warrendale, PA: The Minerals, Metals & Materials Society, March 10-16, Orlando, FL. Pp.973-976.

  27. Han, L., Vian, C., Song, J., Liu, Z.W., Han, Q., Xu, C., & Shao, L. (2012). Grain Refining of Pure Aluminum. Light Metals 2012, Warrendale, PA: The Minerals, Metals & Materials Society, pp. 967-971.

  28. Han, Q.(Invited) (2011). Using Transparent Materials for Simulating Bubble Formation in the Mushy Zone. Solidification Science and Technology, Proceedings of the John Hunt International Symposium, Eds. Fan, Z., and Stone, I.C., Brunel University, UK, 12-14 December 2011, pp. 257-268.

  29. J. Song, T. DenOuden, and Q. Han, “Soldering Analysis of Core Pins,” NADCA Transactions, The North American Diecasting Associations, 2011, T11-062.

  30. J. Song, C. Vian, and Q. Han, “The Influence of Ultrasonic Vibration on the Microstructure of A380 Alloy,” NADCA Transactions, The North American Diecasting Associations, 2011, T11-011.

  31. Z.W. Liu and Q. Han, “Application of Ultrasonic Vibration in the Synthesis of in situ Particulate Reinforced Aluminum Matrix Composites,” NADCA Transactions, The North American Diecasting Associations, 2011, T11-042.

  32. F. He, Q. Han, Y.C. Chen, C. Xu, and L. Shao, “Study on mechanical properties of al metal matrix nanocomposites processed using ultrasonic vibration,” ASME International Manufacturing Science and Engineering Conference MSEC, vol. 2, (2009), pp. 285 (MSEC2009-84197). New York: ASME Publishing.

  33. C. Braver, M. Tumey, A. Harlow, Q. Han, “The effect of ultrasonic treatment on fiber-reinforced composite materials,” ASME International Manufacturing Science and Engineering Conference MSEC, vol. 1 (2009),  pp. 547 (MSEC2009-84149). New York: ASME Publishing.

  34. Rakita, M., & Han, Q. (2009). Simulation of Solidification Defects for Prediction of Dross Formation in Aluminum 5182 Remelt Secondary Ingot. ASME International Manufacturing Science and Engineering Conference MSEC, vol. 1, (2009), pp. 365 (MSEC2009-84160). New York: ASME Publishing.

  35. Rakita, M., Kakas, D., Skoric, B., Tomovic, M., Han, Q., & Jackson, M. (2009). S-Type Cultivator Tines which Comply with ISO Standard: FEM Analysis of Stresses and Manufacturing Issues. ASME International Manufacturing Science and Engineering Conference MSEC, vol. 1, pp. 373 (MSEC2009-84162). New York: ASME Publishing.

  36. S.K. Poola,., Q. Han, C. Corum, C., Xu,  & L. Shao: “Grain Refinement of AZ91E Alloy Using Ultrasonic Vibrations,” Magnesium Technology 2009, Warrendale: The Minerals, Metals & Materials Society, 2009, 315-319.

  37. Q. Han,  “The Effect of Microstructure on the Surface Finish of Extruded 6262 Aluminum Alloy Billet,” Aluminum alloys: Fabrication, Characterization and Applications, Warrendale: The Minerals, Metals & Materials Society, 2009, 95-100.

  38. Q. Han: “Ultrasound Assisted Die Casting Process,” NADCA Transactions, The North American Die Casting Association, 2009, T09-113.

  39. Q. Han, S. Viswanathan, K.L. More, M.J. Warwick, Y.C. Chen, “Bonding of Steel Inserts During Aluminum Casting,” TMS 2008 Annual Meeting Supplement Proceedings, Vol 3: General paper Selections, 2008, pp. 339-344.

  40. K. Currie, Q. Han, M. Abdelrahman, and J. Droke, “Characterization of AM60B Magnesium Castings Using a Counter Gravity (Hitchiner) Lost Foam Casting Process,” Magnesium Technology 2008, eds. N. Pekguleryuz, N. Neelameggham, R. Beals, and E. Nyberg, (Warrendale, PA: The Minerals, Metals & Materials Society, 2008), pp. 203-208.

  41. Q. Han, and P. Sklad(Invited), “Ultrasonic Processing of Materials,” Proceedings of the Third International Conference on Light Metals Technology, September 24-26, 2007, Saint-Sauveur, Quebec, Canada

  42. Q. Han, H. Xu, T.T. Meek, P. Ried, and P. Olson, “An Accelerated Method for Soldering Testing, “ NADCA Transactions 2007, paper T07-041.
  43. Q. Han, R. Dinwiddie, P. Sklad et al, “Comparison of Lost Foam Casting of AM60B Alloy and A356 Alloy, “ AFS Transactions 2007, Paper 07-147.
  44. Q. Han, “The Use of Power Ultrasound for Material Processing,” Materials Processing under the Influence of External Fields,” eds. Q. Han, G. Ludtka, and Q. Zhai, (Warrendale, PA: The Minerals, Metals & Materials Society, 2007), pp. 97-106.
  45. Q. Liu, Y Gao, F. Qi, Q. Zhai, and Q. Han, “Influence of Power Ultrasonic on Solidification Structure and Segregation of 1Cr18Ni9Ti Stainless Steel,” Materials Processing under the Influence of External Fields,” eds. Q. Han, G. Ludtka, and Q. Zhai, (Warrendale, PA: The Minerals, Metals & Materials Society, 2007), pp. 107-112.
  46. H. Xu, T.T. Meek, Q. Zhai, and Q. Han, “Degassing of Molten Aluminum Using Ultrasonic Vibrations,” Materials Processing under the Influence of External Fields,” eds. Q. Han, G. Ludtka, and Q. Zhai, (Warrendale, PA: The Minerals, Metals & Materials Society, 2007), pp. 123-132.
  47. Q. Han, R. Dinwiddie, P. Sklad, K. Currie, F. Vondra, M. Abdelrahman, G.V. Walford, D. Nolan, and T. Nedkova, “Lost Foam Casting of Magnesium Alloys,” Magnesium Technology 2007, eds. R.S. Beals, M.O. Pekguleryuz, A. Lou, and N.R. Needlameggham, (Warrendale, PA: The Minerals, Metals & Materials Society, 2007), pp. 115-120.
  48. S.J. Zhang, Q. Han, and Z.K. Liu, “Thermodynamic Investigation of Na-Induced Embrittlement in Mg-Li Alloys,” Symposium GG: Multiscale Modeling of Materials, MRS 2006 Fall Meeting, Boston, MA, USA, November 27-30, 2006.
  49. X. Jian, T.T. Meek, T. Geer, and Q. Han, “Effect of Power Ultrasound on Grain Refinement of Magnesium AM60B Alloy” Magnesium Technology 2006,, pp. 103-107.
  50. J. Clark III, A. Thekdi, S. Ninqileri, Q. Han, “Reconsideration of Natural-Gas Immersion Burners to Melt Recycled Aluminum,” Materials Science and Technology, Vol.3, Materials Science and Technology 2005 – Proceedings of the Conference, p. 3-9.
  51. A.L. Bowles, Q, Han, and J.A. Horton, “Castability of Magnesium Alloys,” Magnesium Technology 2005, pp. 99-104.
  52. H. Xu, T.T. Meek, and Q. Han, “Ultrasonic Degassing in Aluminum Alloys,” Materials Science and Technology, V1, Materials Science and Technology 2005-Proceedings of the Conference, Pittsburgh, PA, USA, 2005, pp.3-11.
  53. X. Jian, C. Xu, T.T. Meek, and Q. Han, “The Effect of Ultrasonic Vibration on the Solidification Structure of A356 Alloy,” AFS Transactions, 2005, Paper No. 05-085.
  54. Q. Han, “An Experimental Die for Testing the Castability of Die Casting Alloys,” NADCA Transaction, 2005, Paper No. 05-087.
  55. M. Du, Q. Han, and R. Peterson, “Detection of Water Content in Aluminum Scrap with a Fast Neutron Source (Cf-252)”, Light Metals 2005, ed. H. Kvande, (Warrendale, PA: The Minerals, Metals & Materials Society, 2005), pp. 855-859.
  56. B.M. Golchert, C.Q. Chou, A. Quenette, Q. Han, P.E. King, “Combustion Space Modeling of An Aluminum Furnace,” Light Metals 2005, ed. H. Kvande, (Warrendale, PA: The Minerals, Metals & Materials Society, 2005), pp. 887-892.
  57. P.E. King, M.C. Hayes, T. Li, Q. Han, M. Hassan, and B.M. Golchert, “Design and Operation of An Experimental Reverberatory Aluminum Furnace,” Light Metals 2005, ed. H. Kvande, (Warrendale, PA: The Minerals, Metals & Materials Society, 2005), pp. 899-904.
  58. H. Xu, X. Jian, T.T. Meek, and Q. Han, “Ultrasonic Degassing of Molten Aluminum under Reduced Pressure,” Light Metals 2005, ed. H. Kvande, (Warrendale, PA: The Minerals, Metals & Materials Society, 2005), pp. 915-919.
  59. Z. Long, Q. Han, S. Viswanathan, S. Ningileri, S.K. Das, K. Kuwana, M. Hassan, M. Khraisheh, A. Sabau, and K. Saito, “Integrated 3D Model to Simulate Solidification and Predict Hot Cracking during DC Casting of Aluminum Alloys,” Light Metals 2005, ed. H. Kvande, (Warrendale, PA: The Minerals, Metals & Materials Society, 2005), pp. 1057-1062.
  60. Q. Han, “The Use of Computational Thermodynamics for Die Casting Applications,” NADCA Transactions 2004, Paper T1-051.20.  Q. Han, “Dross Formation during Solidification of Aluminum 5182 Alloy RSI” Transactions of the American Foundry Society, v. 112, 2004, paper 04-063.21.  Q. Han, “Influence of Chemical Composition on Hot Tearing Susceptibility of FXS-414 alloy,” Transactions of the American Foundry Society, v. 112, 2004, paper 04-062.
  61. Q. Han, R.D. Peterson, and J. Zeh, “Some of the Factors that Affect Dross Formation in Aluminum 5182 RSI,” Light Metals 2004, ed. A.T. Tabereaux, (Warrendale, PA: The Minerals, Metals & Materials Society, 2004), pp. 163-168.
  62. Q. Han, M.I. Hassan, S. Viswanathan, K.Sato, and S.K. Das, “An Experimental Method for Determining Mechanical Properties in the Non-Equilibrium Mushy Zones of Alloys,” Solidification of Aluminum Alloys, eds. M.G. Chu, D.A. Granger, and Q. Han, (Warrendale, PA: The Minerals, Metals & Materials Society, 2004), pp. 211-220.
  63. X. Jian, Q. Han, H. Xu, and T.T. Meek, “Solidification of Aluminum Alloy A356 Under Ultrasonic Vibration”, Solidification of Aluminum Alloys, eds. M.G. Chu, D.A. Granger, and Q. Han, (Warrendale, PA: The Minerals, Metals & Materials Society, 2004), pp.73-79.
  64. H. Xu, X. Jian, T.T. Meek, Q. Han, “Investigation of Ultrasonic Degassing in Molten Aluminum A356 Alloy,” Light Metals 2004, ed. A.T. Tabereaux, (Warrendale, PA: The Minerals, Metals & Materials Society, 2004), pp. 731-735.
  65. Q. Han, “Dross Formation in Aluminum-Magnesium Alloy RSI,” LiMat-3rd International Conference on Light Materials for Transportation Systems, Hawaii, USA, November 2-6, 2003.
  66. X. Jian, H. Xu, T.T. Meek, Q. Han, and S. Viswanathan, “Ultrasonic Solidification of Aluminum A356 Alloy,” LiMat-3rd International Conference on Light Materials for Transportation Systems, Hawaii, USA, November 2-6, 2003.
  67. H. Xu, X. Jian, T.T. Meek, and Q. Han, “Ultrasonic Degassing in Aluminum A356 Alloy,” LiMat-3rd International Conference on Light Materials for Transportation Systems, Hawaii, USA, November 2-6, 2003.
  68. T. Li, M. Hassan, K. Kuwana, K. Saito, S. Viswanathan, and Q. Han, “Thermodynamic Analysis of Energy Utilization and Pollutant Formation Control in Secondary Aluminum Melting Furnaces,” Energy Efficient Manufacturing Processes (The MPMD Fourth Global Innovations Symposium), eds, I.E. Anderson, T.G. Marechaux, and C. Cockrill, (Warrendale, PA: The Minerals, Metals & Materials Society, 2003), pp. 43-51.
  69. Q. Han, W.A. Simpson, J.L Zeh, E.A. Kenik, P. Angelini, and V.K.Sikka, “The Effect of Solidification Defect on the Dross Formation During Re-melting of Aluminum 5182 Alloy RSI,” Light Metals 2003, ed. P.N. Crepeau, (Warrendale, PA: The Minerals, Metals & Materials Society, 2003), pp. 773-777.
  70. Q. Han, and S. Viswanathan, “Optimization of Aluminum 357 Alloy for Semi-Solid Metal Casting,” NADCA Transactions, 2002, T02-32.
  71. Q. Han, and S. Viswanathan, “Mechanism of Die Soldering during Aluminum Die Casting,” NADCA Transactions, 2002, T02-034.
  72. S. Viswanathan, C.A. Blue, Q. Han, G. Engleman, and N.B. Dahotre, “High Density Infrared Coatings for Soldering Resistance,” NADCA Transactions, 2002, T02-044.
  73. Q. Han and S. Viswanathan, D.L. Spainhower, and S.K. Das, “Nature and Formation of Surface Cracks in DC Cast Ingots,” Light Metals 2002, ed. W. Scheider, (Warrendale, PA: The Minerals, Metals & Materials Society, 2002), pp. 975-979.
  74. S. Viswanathan, A.S. Sabau, Q. Han, and A.J. Duncan, “Prediction of Microporosity Distributions in Aluminum Alloy Castings,” Proceedings of the Merton C. Flemings Symposium on Solidification and Materials Processing, eds R. Abbaschian, H. Brody, and A. Mortensen, (Warrendale, PA: The Minerals, Metals & Materials Society, 2001), pp.379-384.
  75. Q. Han, E.A. Kenik, R. Agnew, and S. Viswanathan, “Solidification Behavior of Commercial Magnisum Alloys,” Magnesium Technology 2001, ed. J. Hryn, (Warrendale, PA: The Minerals, Metals & Materials Society, 2001), pp.81-86.
  76. E.A. Payzant, S.R. Agnew, Q. Han, and S. Viswanthan, “Mg17Al12 Phase Precipitation Kinetics in Die Casting Alloys AZ91D and AM60B,” Magnesium Technology 2001, ed. J. Hryn, (Warrendale, PA: The Minerals, Metals & Materials Society, 2001), pp. 183-188.
  77. S. R. Agnew, S. Viswanathan, E. A. Payzant, Q. Han, K. C. Liu, and E. A. Kenik, "Tensile and Compressive Creep Behavior of Magnesium Die Casting, Alloys Containing Aluminium," Magnesium Alloys and Their Applications, ed. K.U. Kainer, (Weinbein, Germany: Wiley-VCH Verlag, 2000) pp.687-692.
  78. Q. Han and S. Viswanathan, “Microstructure Prediction in A356 Alloy Castings,” Light Metals 2000, ed. R.D. Peterson, (Warrendale, PA: The Minerals, Metals & Materials Society, 2000), pp. 609-614.
  79. Q. Han, E.A. Kenik, and S. Viswanathan, “Die Soldering in Aluminum Die Casting,” Light Metals 2000, ed. R.D. Peterson, (Warrendale, PA: The Minerals, Metals & Materials Society, 2000), pp. 765-772.
  80. A.J. Duncan, Q. Han and S. Viswanathan: “Liquid Permeability Measurements in Solidifying Aluminum-Copper Alloys,” Fluid Flow Phenomena in Metals Processing, eds. N. El-Kaddah, D.G.C. Robertson, S.T. Johansen and V.R. Voller, (Warrendale, PA: The Minerals, Metals & Materials Society, 1999), pp.525-532.
  81. A.S. Sabau, Q. Han and S. Viswanathan: “Projection Methods for Interdendritic Flows,” Fluid Flow Phenomena in Metals Processing, eds. N. El-Kaddah, D.G.C. Robertson, S.T. Johansen and V.R. Voller, (Warrendale, PA: The Minerals, Metals & Materials Society, 1999), pp.403-411.
  82. S. Viswanathan, A.J. Duncan, S.A. Sabau, Q. Han, W.D. Porter and B.W. Riemer: “Modeling of Solidification and Porosity in Aluminum Alloy Castings,” AFS Transactions, 98-103 (1998), pp. 411-417.
  83. S. Viswanathan, A.S. Sabau, Q. Han and A.J.Duncan: “Modeling of Porosity in Aluminum Alloy Castings,” Proceedings from Materials Solutions Conference ’98 on Aluminum Casting Technology, 1998, pp. 135-138..
  84. S. Viswanathan, A.J. Duncan, A.S. Sabau and Q. Han: “Prediction of Microporosity in Aluminum Alloy Castings,” Modeling of Casting, Welding and Advanced Solidification Processes-VIII, Eds. B.G.Thomas and C. Beckermann, (Warrendale, PA: The Minerals, Metals & Materials Society, 1998), pp. 849-856.
  85. X. Wan, Q. Han, and J.D. Hunt: “Experimental Studies on the Transition from Regular to Irregular Dendritic Growth,” Solidification Processing 1997, eds. J. Beech and H. Jones, (Ranmoor House, Sheffield, England, 1997), pp. 397-400.
  86. Q. Han, X. Wan and J.D. Hunt: “Experimental Investigation on the Spacing of Dendrite Arrays,” TMS Spring Meeting, Anaheim, USA, Feb. 1996.
  87. Q. Han and J.D. Hunt: “Numerical Modeling of the Growth of a Cellular/Dendritic Array in Multi-component Alloys,” MRS Fall Meeting, Boston, USA.,Dec 3-7, 1996.
  88. Q. Han and J.D. Hunt: “Criteria for Particle Pushing,” Proceeding of the Second Young Scientist Congress, (Beijing, China, 1995), pp. 81-85.
  89. J. D. Hunt, Q. Han, and S-Z Lu: “Numerical Modeling of Cellular/Dendritic Array Growth,” Keynote paper at the International Symposia on Advanced Materials and Technology for the 21st Century, JIM and TMS, Hawaii, USA, Dec.1995.

Pages