Publications

Research Publications and Presentations

Department: Engineering Technology

Tatiana Goris
  1. Goris, T.V., & Dyrenfurth, M. J. (2012) Concepts and Misconceptions in Engineering, Technology, and Science. Overview of Research Literature. ASEE Illinois/Indiana Section Conference, Valparaiso University, Valparaiso IN, March 17th. http://ilin.asee.org/Conference2012/Papers/Goris.pdf
  2. Goris, T. V., & Dyrenfurth, M. J. (2011) Work in Progress- Analysis of Misconceptions of Engineering Technology Students About Electrical Technology Concepts. A Mixed Method Study. Paper presented at the FIE IEEE Annual Conference, Rapid City, SD, October 12-15. Session T4J. http://fie-conference.org/fie2011/sessions/T4J.htm
  3. Budyakov, V.V., & Goris T.V. (2010). Occurrence of Misconceptions and the Ways of Its Overcoming (In Russian). In Aspects of Industrial Development and Modernization of Education. Don State Technical University, Russia. ISBN 978-5-7509-1273-5.
  4. Goris, T. V., & Dyrenfurth, M. J. (2010) Students’ Misconceptions in Science, Technology and Engineering. Paper presented at the ASEE Illinois/Indiana Section Conference, Purdue University, West Lafayette, In. http://ilin.asee.org/Conference2010/Papers2010.html
  5. Goris, T.V., (2010). Book review: Thomas Kuhn, The Structure of Scientific Revolutions. Spring 2010 ASEE Student Newsletter. http://students.asee.org/?p=311

 

Qingyou Han

Journals

  1. Z. Liu, M. Rakita, W. Xu, X. Wang, and Q. Han, “Ultrasound Assisted Combustion Synthesis of Al-Ti-C System,”  Ultrasonics Sonochemistry,  (2015), accepted.

  2. Fei Yin, Qingyou Han, Milan Rakita, Meng Wang, Lin Hua, Chuansheng Wang. Numerical modeling and experimental approach for shot velocity evaluation during ultrasonic shot peening, International Journal of Computational Materials Science and Surface Engineering, 2014.(accepted)

  3. Q. Han, “Ultrasonic Processing of Materials,” Metallurgical and Materials Transaction B, (2015), accepted.

  4. X. Wang, and Q. Han , “On the Understanding of Aluminum Grain Refinement by Al-Ti-B Type Mater Alloys,” Metallurgical and Materials Transaction B, Accepted. (2015)

  5. Z. Liu, M. Rakita, W. Xu, X. Wang, and Q. Han, “Ultrasound Assisted Salts-Metal Reaction for Synthesizing TiB2 Particles at Low Temperatures,” Chemical Engineering Journal, 263 (2015), pp. 317-324.

  6. F. Yin, L. Hua, X. Wang, M. Rakita, and Q. Han, “Numerical Modeling and Experimental Approach for Surface Morphology Evaluation during Ultrasonic Shot Peening,” Computational Materials Science, 92 (2014) pp. 28-35.

  7. F. Yin, S. Hu, L. Hua, X. Wang, S. Suslov, and Q. Han, “Surface Nanocrystallization and Numerical Modeling of Low Carbon Steel by Means of Ultrasonic Shot Peening,” Metallurgical and Materials Transactions A46 (3), (2014), pp. 1253-1261.

  8. X. Wang, and Q. Han, “Relationships of Diboride Phases in Al-Ti(Zr)-B Alloys,” Materials Science and Technology, 31, No. 7 (2015) pp. 874-879.

  9. Q. Han, “Ultrasonic Degassing of Aluminum Alloys,” Materials Science Forum, vols. 783-786 (2014), pp. 155-160.

  10. M. Wang and Q. Han, “Particle Pushing during Solidification of Metals and Alloys,” Materials Science Forum, vols. 783-786 (2014), pp. 1513-1517.

  11. Wang, X., Jiang, L., Luo, A., Song, J., Liu, Z., Yin, F., Han, Q., Yue, S., and Jonas, J.J., “Deformation of Twins in a Magnesium Alloy under Tension at Room Temperature,” Alloys and Compounds, 2014, vol. 594, 44-47.

  12. Z.W. Liu, X.M. Wang, Q. Han*, and J.G. Li, Effect of ultrasonic vibration on direct reaction between solid Ti powders and liquid Al. Metallurgical and Materials Transactions A, 45(2014), pp.543-546.

  13. Z.W. Liu, X.M. Wang, Q. Han*, and J.G. Li, “Effects of the addition of Ti powders on the microstructure and mechanical properties of A356 alloy,” Powder Technology, 253(2014), pp.751-756.

  14. Z.W. Liu, X.M. Wang, Q. Han*, and J.G. Li, “Synthesis of submicron sized TiC particles in aluminum melt at low melting temperature,” Journal of Materials Research, vol. 29, 2014, issue 07, pp. 896-901.

  15. Z.W. Liu, M. Rakita, X. Wang, W. Xu, and Q. Han, “In Situ Formed Al3Ti Particles in AL Alloy Matrix and Their Effects on the Microstructure and Mechanical Properties of 7075 Alloy,” Journal of Materials Research, vol. 29, 2014, issue 12, pp. 1354-1361.

  16. C. Song, K. Li, K. Xie, W. Liu, S. Zhao, Q. Han, and Q. Zhai, “The Effect of the Nucleation Ability on Solidified Microstructures of Gas-Atomized Fe-6.5 wt.%Si Alloy Powder,” Powder Technology, 263 (2014) pp. 31-36.

  17. Liu, Z.W., Han*, Q., & Li, J.G. (2013). Fabrication of in situ Al3Ti/Al composites by Using Ultrasound Assisted Direct Reaction between Solid Ti Powders and Liquid Al. Powder Technology, 247: pp. 55-59.

  18. Liu Y., Han* Q., Hua L., & Xu C. (2013). Numerical and Experimental Investigation of Upsetting with Ultrasonic Vibration of Pure Copper Cone Tip. Ultrasonics, 53(1), 803-807.

  19. Xu, C., Cui, Y., & Han. (2013). Q. Severe Plastic Deformation of Steel Induced by Ultrasonic Vibrations. Open Journal of Metal, 3, pp.1-5.

  20. Rakita, M., Liu, Y., Yin, F., Wang, M., & Han, Q. (2013). Ultrasonic Shot Peening. International Journal of Computational Materials Science and Surface Engineering, 5, No. 3, 189-209.

  21. X. Jian, and Q. Han, “Formation of Hypereutectic Silicon Particles in Hypoeutectic Al-Si Alloys under the Influence of High-Intensity Ultrasonic Vibration,” China Foundry, 2013, vol. 10 (2), pp. 118-123.

  22. Y. Liu, S. Suslov, Q. Han, L. Hua, and C. Xu, “Comparison Between Ultrasonic Vibration Assisted Upsetting and Conventional Upsetting,” Metall. Mater. Transactions, 44A, (2013), (7), pp. 3232-3244.

  23. C. Song, Y. Guo, K. Li, F. Sun, Q. Han, and Q. Zhai, “In-situ Observation of Phase Transformation and Structure Evolution of a 12 pct Cr Ferritic Stainless Steel,” Metall. Mater. Transactions, 43B, October, (2012), pp. 1127-1137.

  24. Z.W. Liu, Q. Han, and J.G. Li, “Formation of Small Blocky Al3Ti Particles via Direct Reaction between Solid Ti Powders and Liquid Al,” Metall. Mater. Transactions, 43A, n12, (2012), pp. 4460-4463.

  25. Z.W. Liu, Q. Han, J. G. Li, “A Developed Method for Producing in situ TiC/Al Composites by Using Quick Preheating Treatment and Ultrasonic Vibration,” Composites B(IF: 1.73), 43(5), (2012), pp. 2429-2433.

  26. Z.W. Liu, Q. Han, J. G. Li, “A Developed Method for Fabricating in situ TiCp/Mg Composites by Using Quick Preheating Treatment and Ultrasonic Vibration,” Metall. Mater. Transactions 43A (2012), pp.2116-2124. (IF: 1.545)

  27. Z.W. Liu, Q. Han, J. G. Li, “Effect of Ultrasonic Vibration on Microstructural Evolution of the Reinforcements and Degassing of in situ TiB2p/Al-12Si-4Cu Composites,” Journal of Materials Processing Technology(IF: 1.78),” 212 (2012), pp. 365-371.

  28. J. Song, T. Denouden, and Q. Han, “Mechanisms of Soldering Formation on Coated Core Pins,” Metall. Mater. Trans 43A (2012), pp. 415-421.

  29. Z.J. Zuo, Q. Han, and M. Dai, “The Analysis of Stiffness Condition in Rolling Thin-Walled Ring,” Applied Mechanics and Materials, 157-158 (2012), pp. 702-705.

  30. Y. Liu, S. Suslov, Q. Han, C. Xu, and L. Hua, “Microstructure of the Pure Copper Produced by Upsetting with Ultrasonic Vibration,” Materials Letters, vol. 67 (2012), pp. 52-55.

  31. Z.W. Liu, Q. Han, J. G. Li, “Ultrasound Assisted in situ Technique for the Synthesis of Particulate Reinforced Aluminum Matrix Composites,” Composites: Part B Engineering, vol. 42 (2011), pp. 2080-2084.

  32. Z.W. Liu, M. Rakita, Q. Han, and J.G. Li, “Microstructural Evolution of Reinforcements in the Remelting in situ TiV/Al-12Si Composites Treated by Ultrasonic Vibration,” Materials Research Bulletin (IF 2.1), vol. 46 (2011), pp. 1674-1678.

  33. C. Song, Y. Guo, Y. Zhang, H. Zheng, M. Yan, Q. Han, and Q. Zhai, “Effects of Currents on the Microstructure of Directionally Solidified Al-4.5 wt% Cu Alloy,” Journal of Crystal Growth, 324 (2011) pp.235-242.(IF:1.726)

  34. Y. Zhang, C. Song, L. Zhu, H. Zheng, H. Zhong, Q. Han, and Q. Zhai, “Influence of Electric-Current Pulse Treatment on the Formation of Regular Eutectic Morphology in an Al-Si Eutectic Alloy,” Metall. Mater. Trans 42B (2011), pp. 604-611.

  35. C. Allen, and Q. Han, “Grain Refinement of Pure Aluminum Using Ultrasonics,” International Journal of Metalcasting, 5 (2011), No.1, pp.69-70.

  36. Q. Han, H. Xu, P.P. Ried, and P. Olson, “Accelerated Method for Testing Soldering Tendency of Core Pins,” International Journal of Cast Metals Research, 23 (2010), Issue 5, pp. 296-302.

  37. Q. Cheng, S. Wang, and Q. Han, “Novel Process for Isolating Fibrils from Cellulose Fibers by High-Intensity Ultrasonication. II. Fibril Characterization,” Journal of Applied Polymer Science, 115 (2010), Issue 5, pp. 2756-2762.

  38. Y. Dai, M. Yang, C. Song, Q. Han, and Q. Zhai, “Solidification Structure of C2.08Cr25.43Si1.19Mn0.43Fe70.87 Powders Fabricated by High Pressure Gas Atomization,” Materials Characterization, 61 (2010), issue 1, pp. 116-122.

  39. D.M. Gao, Z.J. Li, Q. Han, and Q.J. Zhai, “Effects of Ultrasonic Power on Microstructure and Properties of AZ91 Alloy,” Materials Science and Engineering A, 502 (2009), issues 1-2, pp. 2-5.

  40. C.J. Song, Q. Han, and Q.J. Zhai, “Review of Grain Refinement Methods for As-Cast Microstructure of Magnesium Alloy,” China Foundry, 6 (2009), issue 2, pp. 93-103.

  41. F. He, Q. Han, and M. Jackson, “Nanoparticulate Reiforced Metal Matrix Nanocomposites – A Review,” International Journal of Nanoparticles, 1 (2008), issue 4, pp. 301-309.

  42. S. Zhang, Z.K. Liu, and Q. Han, “Thermodynamic Modeling of the Succinonitrile-Water System,” Journal of Phase Equilibria and Diffusion, 29 (2008), pp. 247-251.

  43. H. Xu, Q. Han, and T.T. Meek, “Effects of Ultrasonic Vibration on Degassing of Aluminum Alloys,” Materials Science and Engineering A, 473 (2008), issues 1-2, pp.96-104.

  44. S. Zhang, Q. Han, and Z.K. Liu, “Thermodynamic Investigation of Alkali-Metal-Induced High Temperature Embrittlement in Al-Li Alloys,” Advanced Engineering Materials, 9 (2007), No.11, pp.981-986.
  45. S. Zhang, Q. Han, and Z.K. Liu, “Fundamental Understanding of Na-Induced High Temperature Embrittlement in Al-Mg Alloys,” Philosophical Magazine, 2007, vol. 87, no. 1, pp.147-157.
  46. Y. Cui, C. Xu, and Q. Han, “Microstructure Improvement in Weld Metal Using Ultrasonic Vibrations,” Advanced Engineering Materials, 9 (2007), No.3, pp. 161-163.
  47. H. Xu, T.T. Meek, and Q. Han, “Effects of Ultrasonic Field and Vacuum on Degassing of Molten Aluminum Alloy,” Materials Letters, 61 (2007), No. 4-5, pp. 1246-1250.
  48. Y. Cui, C.L. Xu, and Q. Han, “A Method of Eliminating the Unmixed Zone in AL-6XN Alloy Welds,” Scripta Materialia., 2006, vol.55, No.11, pp. 975-978.
  49. Q. Han, “Motion of Bubbles in the Mushy Zone,” Scripta Materialia., 2006, vol.55, No.10, pp. 871-874.
  50. S.J. Zhang, Q. Han, and Z.K. Liu, “Thermodynamic Modeling of the Al-Mg-Na System,” Journal of Alloys and Compounds, 2006, vol. 419, pp. 91-97.
  51. H. Xu, D.L. Xu, S. Zhang, and Q. Han, “Effect of the Alloy Composition on the Grain Refinement of Aluminum Alloys,” Scripta Materialia., 2006, vol. 54, n12, pp. 2191-2196.
  52. C. Xu, Z. Jia, D. Wu, Q. Han, and T.T. Meek, “Fabrication of nylon-6/Carbon Nanotube Composites,” Journal of Electronic Materials, 2006, Vol. 35, No. 5, p.954-957.
  53. C. Xu, J. Chen, Y. Cui, Q. Han, H. Coo, K. Liaw, and D. Wu, “Influence of the Surface Treatment on the Deposition of Platinum Nanoparticles on the Carbon Nanotubes,” Advanced Engineering Materials, 2006, Vol. 8, No.1-2, pp.73-77.
  54. X. Jian, T.T. Meek, and Q. Han, “Refinement of Eutectic Silicon Phase of Aluminum A356 Alloy Using High-Intensity Ultrasonic Vibration,” Scripta Materialia., 2006, vol. 54, n5, pp. 893-896.
  55. S.J. Zhang, C. Brubaker, C. Jiang, M. Yang, Y. Zhong, Q. Han, and Z.K. Liu, “A Combined First-Principles Calculation and Thermodynamic Modeling of the F-K-Na System,” Materials Science and Engineering, A418 (2006), pp. 161-171.
  56. P.E. King, B.M. Golchert, T. Li, M. Hassan, and Q. Han, “Energy Efficient Operation of Aluminum Furnaces,” Aluminum World, Issue 9, 2006.
  57. Y. Cui, C.L. Xu, Q. Han, H. Choo, and P.K. Liaw, “Formation of Dendritic Nanotubes under an Electric Field,” Advanced Engineering Materials, vol. 7, No.9, 2005, pp.827-829.
  58. Q. Han, M.I. Hassan, S. Viswanathan, K. Saito, and S.K. Das, “The Reheating-Cooling Method: A Technique for Measuring Mechanical Properties in the Nonequilibrium Mushy Zones of Alloys,” Metall Mater Trans 36A, 2005, pp. 2073-2080.
  59. Q. Han, and H. Xu, “Fluidity of Alloys under High Pressure Die Casting Conditions,” Scripta Materialia., 2005, vol. 53, pp. 7-10.
  60. X. Jian, H. Xu., T.T. Meek, and Q. Han, “Effect of Power Ultrasound on Solidification of Aluminum A356 Alloy,” Materials Letters, vol. 59, issues 2-3, 2005, pp. 190-193.
  61. Q. Han, B.K. Kad, and S. Viswanathan, “The Design Perspective of Magnesium Die Casting Alloys,” Philosophical Magazine, vol. 84, issue 36, 2004, pp. 3843-60.
  62. Q. Han, and S. Viswanathan, “The use of thermodynamic simulation for the selection of hypoeutectic aluminum-silicon alloys for semi-solid metal processing,” Materials Science and Engineering A, v 364, n 1-2, Jan 15, 2004, pp. 48-54.
  63. Cailu Xu, Gongwei Wu, Zheng Liu, Dehai Wu, Thomas T. Meek, Qingyou Han, Preparation of copper nanoparticles on carbon nanotubes by electroless plating method, Materials Research Bulletin, 39 (2004), pp. 1499-1505.
  64. H. Xu, X. Jian, T.T. Meek, and Q. Han, “Degassing of Molten Aluminum A356 Alloy Using Ultrasonic Vibration,” Materials Letters, v 58/29, 2004, pp. 3668-3672.
  65. Q. Han, J. Zeh, E. Hatfield, V.K. Sikka, “Dross formation during remelting of aluminum 5182 remelt secondary ingot (RSI),” Materials Science and Engineering A, v 363, n 1-2, Dec 20, 2003, pp. 9-14.
  66. Q. Han, A.J. Duncan, and S. Viswanathan, “Permeability Measurements of the Flow of Interdendritic Liquid in Equiaxed Aluminum-Silicon Alloys,” Metall. Mater. Trans., 34B (2003), pp. 25-28.
  67. Q. Han, and S. Viswanathan, “Analysis of the Mechanism of Die Soldering in Aluminum Die Casting,” Metall. Mater. Trans., 34A (2003), pp. 139-46.
  68. Q. Han, and S. Viswanathan, “Hydrogen Evolution during Directional Solidification and Its Effect on Porosity Formation in Aluminum Alloys,” Metall. Mater. Trans., 33A (2002), pp.2067-2072.
  69. Q. Han, S. Viswanathan, D.L. Spainhower, and S.K. Das, “The Nature of Surface Cracking in DC Cast Aluminum Alloy Ingots,” Metall. Mater. Trans., 32A (2001), pp.2209-11.
  70. A.J. Duncan, Q. Han and S. Viswanathan: “Measurement of Liquid Permeability in the Mushy Zones of Aluminum-Copper Alloys,” Metall. Mater. Trans. 30B (1999), pp. 745-750
  71. X. Wan, Q. Han and J.D. Hunt: “A Diffusion Solution for the Melting/Dissolution of a Solid at Constant Temperature and Its Use for Measuring the Diffusion Coefficient in Liquids,” Metall. Mater. Trans. 29A (1998), pp. 751-755.
  72. Q. Han: “Interaction of Particles with a Freezing Front,” (Invited) “Current Topics in Crystal Growth Research” 4(1998), pp. 147-154.
  73. J.D. Hunt, Q. Han, and X. Wan, “Growth of a Cellular/Dendritic Array,” High Power Laser and Particle Beams, 9 (1997) No.1, pp. 161-172.

  74. Q. Han, H. Hu and X. Zhong: “Models for the isothermal Coarsening of the Secondary Dendrite arms in Multicomponent Alloys,” Metall Trans, 28B (1997), pp. 1185-1187.
  75. Q. Han and A. Hellawell: “Primary Particle Melting Rates and Equiaxed Grain Nucleation,” Metall Trans. 28B (1997), pp.169-173.
  76. X. Wan, Q. Han, and J.D. Hunt: “Experimental Studies on the Transition from Regular to Irregular Dendritic Growth,” Acta Metall Mater. 45 (1997), pp. 3975-3979.
  77. J.D. Hunt, Q. Han and X. Wan: “Growth of a Cellular/Dendritic Array,” (invited paper), J. Mater. Sci. Technol., 13 (1997) 161-172.
  78. Q. Han and J.D. Hunt: “Numerical Modeling of the Growth of a Cellular/Dendritic Array in Multi-component Alloys,” Matls Sci and Enging, A238 (1997), pp.192-195.
  79. Q. Han and J.D. Hunt: “Behavior of Particles near a Freezing Front,” Materials Review (Chinese), 10 (1996), pp.101-105.
  80. Q. Han, and J.D. Hunt: “On Particle Pushing During Solidification,” Acta Met. Sinica, 32 (1996) No.4, pp.1-6.
  81. X. Wan and Q. Han: “Theory of Array Growth of Cells/Dendrites,” Materials Review (Chinese), 10 (1996), pp.31-35.
  82. Q. Han, and J.D. Hunt: “Particle Pushing: The Critical Flow Speed Required to Put Particles Into Motion During Fluid Flow,” J. Crystal Growth, 152 (1995), pp. 221-227.
  83. Q. Han, and J.D. Hunt: “Redistribution of Particles during Solidification,” (Invited) ISIJ International (Special Issue on Recent Advances in Solidification), 35 (1995), pp. 693-699.
  84. Q. Han: “The Reasons for China’s Science & Technology Falling Behind the West in Modern Times,” Studies in Dialectics of Nature(Philosophy of Nature, Science and Technology, Science, Technology and Society)(Chinese), 11 (1995), No. 11, pp.9-14.
  85. Q. Han, and J.D. Hunt: “Particle Pushing: The Concentration of Particles near a Solid Interface During Fluid Flow,” J. Crystal Growth, 140 (1994), pp. 398-405.
  86. Q. Han, and J.D. Hunt: “Particle Pushing: The Attachment of Particles to the Solid-Liquid Interface During Fluid Flow,” J. Crystal Growth, 140 (1994), pp. 406-413.
  87. Q. Han, J.P. Lindsay, and J.D. Hunt: “The Effect of Fluid Flow on Particle Pushing,” Cast Metals, 6 (1994), pp. 237-.
  88. Q. Han: “The Phenomena of Particle Pushing and Its Mechanism,” Materials Review(Chinese), 8 (1994), pp. 91-96.
  89. Q. Han, and J.D. Hunt: “Particle Pushing: The Distribution of Particles in Liquid Near a Solid Surface,” Matls. Sci. and Enging, A173 (1993) pp.221-225.
  90. Q. Han, P. Wang, and H. Hu,: “Reducing the Aging Effect of Zinc Based Alloys,” J. BUST (in Chinese), 15 (8)  (1993), pp.

  91. X. Zhao, H. Hu, P. Wang, G. Yang, and Q. Han: “Microstructure and Properties of ZA-27TiRE Alloy,” Rare Metals, 4 (2) (1993), pp.

  92. Q. Han, C. Zen, and H. Hu: “The Effects of Rare Earth Elements on the Properties and the Structure of Cast ZA-27 Alloy,” J.BUIST (Chinese), 14 (1992), No.1, pp.42-48.
  93. Q. Han, and H. Hu: “An Experimental Investigation into the Modification of the Corrosion Resistance of the ZA-27 Alloy with Rare Earth Elements,” J. Chinese Rare Earth, 10 (1992), No.3, pp.243-245.
  94. Q. Han, and H. Hu: “A Parameter for Evaluating the Ability of Solute Elements on Grain Refinement in Aluminium Alloy,” Cast Metals, 2, (1989) No.3, pp. 123-126.
  95. Y. Li, Q. Han, and X. Zhong: “The Magnetic Permeability of High Mn Cast Iron,” Foundry (Chinese), 1990, No.6, pp. 5-8.
  96. Q. Han: “A Mathematical Model for the Fluidity of Alloys,” J. BUIST(Chinese), 11(1989), No.4, pp.312-317.
  97. Q. Han, and H. Hu: “A Parameter for Evaluating Grain Refinement of Solute Elements,” Acta Met. Sinica (in Chinese), 24 (1988) No. 5, pp.324-330.
  98. X. Zhong, and Q. Han: “Experimental Investigation Into the Possibility of Eliminating Annealing for Some Cast Iron Parts,” Foundry(Chinese), 1988, No.8, pp.22-24.
  99. X. Zhong. Q. Han, and W. Zhong: “The Influence of Macro-structure on the deformation of Gray Cast Iron,” Modern Casting (Chinese), 1988, No.1, pp.2-6.
  100. Q. Han, H. Hu, and X. Zhong: “The Effect of Ce on the Solidification Structure of Low Sulfur 16Mn Steel,” Acta Met. Sinica, 23 (1987), No.3, pp.176-181.
  101. Q. Han, H. Hu, and X. Zhong: “The Mathematical Models for the Isothermal Coarsening of Secondary Dendrite Arms,” Materials Science Progress (Chinese), 1 (1987), pp.33-39.
  102. H. Hu, X. Zhong, Q. Han, and L. Ma: “The Effect of Ce and Ca-Si on the Primary Solidification Structure of Low Sulfur 16Mn Steel,” Rare Earth (in Chinese), 13 (5).

  103. Q. Han, and H. Hu: “The Effect of Solute Content on the Secondary Dendrite Arm Spacings for Multi-component Alloys,” J. BUIST(Chinese), 7 (1985), No.1, pp.1-11.

Refereed Conference Proceedings

  1. Z. Liu, and Q. Han, “The Evolution of Solid Powders in Liquid Aluminum at Low Temperature and the Effects of Ultrasound on it,” Advanced Composites for Aerospace, Marine, and Land Application, eds.  (Warrendale, PA: The Minerals, Metals & Materials Society, 2015), Orlando, FL, March 15-20, 2015.

  2. V. Rundquist, K. Manchiraju, and Q, Han, “Ultrasonic Degassing and Processing of Aluminum Part II,” eds.  ,(Warrendale, PA: The Minerals, Metals & Materials Society, 2015), Orlando, FL, March 15-20, 2015.

  3. Q. Han (Keynotes), “Automotive Lightweight: Opportunities and Challengers,” MATS 2014, Wuhan University of Technology, October 25-26, 2014, Wuhan, China.

  4. Fei Yin, Qingyou Han, Lin Hua, Finite element modelling and microstructural evolution for multiple impacts during ultrasonic shot peening. 2014 International Conference on Modern Auto Technology and Services, October 25-26, Wuhan China.

  5. Q. Han (Keynotes), “Ultrasonic Processing of Materials,” 53rd Annual Conference of Metallurgists, Vancouver, Canada, September 28-October 1, 2014. Sponsored by MET-SOC CIM (Canadian Institute of Ming, Metallurgy and Petroleum)

  6. X. Wang, and Q. Han (Invited), “On the Understanding of Aluminum Grain Refinement by Al-Ti-B Type Mater Alloys,” Proceedings of the 53rd Annual Conference of Metallurgists, Vancouver, Canada, September 28-October 1, 2014.

  7. Q. Han (Invited), “Ultrasonic Processing of Metallic Materials,” The 2nd International Symposium on Frontier in materials Sciences and Engineering, Salt Lake City, August 3-6, 2014.

  8. Q. Han (Keynotes), “The Mechanism of Die Soldering in Aluminum Die Casting,” Proceedings of the 1st International Symposium on Nonferrous Alloys and Special Casting Technology, Shanghai, June 20-21, 2014 (Sponsored by Chinese Foundry Society).

  9. M. Wang, X. Wang, W. Xu, and Q. Han, “Thermodynamic Simulation to Reduce β-(AlFeSi) Phase Formation in A380 Alloy”, NADCA Transaction, 2014, T14-051, pp. 1-11, Milwaukee, USA

  10. X. Wang, Q. Han, S. long, Y. Li, and W. Li, “Vacuum assisted die filling and pressurized feeding for magnesium die casting”, NADCA Transaction, 2014, T14-xxx, pp. 1-6, Milwaukee, USA

  11. W. Dai, X.M. Wang, W. Zhao, and Q. Han “A Comparison of the Effects of Al-Ti-B Type of Grain Refiners from Different Makers on Pure Aluminum”, Light Metals 2014, TMS 2014,  San Diego, Feb. 17-20, 2014.

  12. M. Wang, and Q. Han (Invited), “On Particle Pushing during Solidification of Metals and Alloys”, Thermec 2013, Las Vegas, 6-9 December, 2013.

  13. Q. Han (Invited), “Ultrasonic Degassing of Aluminum Alloys,” Thermec 2013, Las Vegas, 6-9 December, 2013.

  14. C.M. Vian, W. Dai, and Q. Han, “Behavior of Bubbles during Solidification,”NADCA Transactions 2013, T13-013.

  15. M. Rakita, and Q. Han, “Strain Rate as a Predictor of Hot Tearing in AZ91D Magnesium Alloy,” AFS Transactions, Cast Expo & Metalcasting Congress, American Foundry Society, St. Louis, Missouri. April 6-9, 2013. Paper 13-1340.

  16. Q. Li, W. Su, W. Dai, and Q. Han, “Numerical Simulation of Fluidity and Molding Filling Characteristics of Magnesium Alloys during Vacuum Assisted Lost Foam Casting Process”. AFS Transactions, Cast Expo & Metalcasting Congress, American Foundry Society, St. Louis, Missouri. April 6-9, 2013. Paper 13-1513.

  17. Q. Han, “Motion of Bubbles in the Mushy Zone – A Neglected Physical Phenomenon,” (Invited). China Foundry Week 2012, Suzhou, China, October 17-19. Proceedings of the China Foundry Week 2012, Foundry Institution of Chinese Mechanical Engineering Society, 2012, p. 56.

  18. M. Wang, and Q. Han, “Particle Pushing or particle Segregation during Solidification. Advances in Metal Casting Technologies, MS&T 2012, October 7-11, Pittsburgh, PA. USA.

  19. M. Wang, D. Myers, and Q. Han, “Study on Microstructure Evolution during Self-pierce Riveting Process,” NADCA Transactions, The North American Diecasting Associations, 2012, T12-062.

  20. J. Song, T. DenOuden, and Q. Han, “The Coating Failure of Coated Core Pin during Die Casting Process,” NADCA Transactions, The North American Diecasting Associations, 2012, T12-081.

  21. Wu, W., Zhu*, M., Sun, D., Dai, T., Han, Q., & Raabe, D. (2012). Modeling of Dendritic Growth and Bubble Formation. MCWASP XIII 2012. (Modeling of Casting, Welding and Advanced Solidification Processes 2012). June 17-22, Styria, Austria.

  22. Q. Han, (2012), “Radical Motion of Bubbles in the Mushy Zone,”(Invited), Proceedings of the Frontier in Solidification Science and Processing Technology, Shanghai University, May 2012, Shanghai, China.

  23. Han, Q. (2012). Radical Motion of Bubbles in the Mushy Zone.  AFS Transactions, Columbus, OH, April 18-20.

  24. Y. Teng, Y. Yang, H. Yu, L. Wang, & W. Huang. (2012). Behavior of Bubbles under Directional Solidification Conditions. AFS Transactions, Columbus, OH, April 18-20.

  25. Liu, Y., Han, Q., & Hua, Lin (2012). Finite Element Simulation Analysis of the Ultrasonic Vibration Forging of an Aluminum Cylinder Workpiece. Light Metals 2012, pp. 256-264. Warrendale, PA: The Minerals, Metals & Materials Society, March 10-16, Orlando, FL.

  26. Song, J., & Han, Q. (2012). Study on the Effect of Ultrasonic Vibration on the Microstructure of As-Cast Hypereutectic Aluminum Alloys. Light Metals 2012, Warrendale, PA: The Minerals, Metals & Materials Society, March 10-16, Orlando, FL. Pp.973-976.

  27. Han, L., Vian, C., Song, J., Liu, Z.W., Han, Q., Xu, C., & Shao, L. (2012). Grain Refining of Pure Aluminum. Light Metals 2012, Warrendale, PA: The Minerals, Metals & Materials Society, pp. 967-971.

  28. Han, Q.(Invited) (2011). Using Transparent Materials for Simulating Bubble Formation in the Mushy Zone. Solidification Science and Technology, Proceedings of the John Hunt International Symposium, Eds. Fan, Z., and Stone, I.C., Brunel University, UK, 12-14 December 2011, pp. 257-268.

  29. J. Song, T. DenOuden, and Q. Han, “Soldering Analysis of Core Pins,” NADCA Transactions, The North American Diecasting Associations, 2011, T11-062.

  30. J. Song, C. Vian, and Q. Han, “The Influence of Ultrasonic Vibration on the Microstructure of A380 Alloy,” NADCA Transactions, The North American Diecasting Associations, 2011, T11-011.

  31. Z.W. Liu and Q. Han, “Application of Ultrasonic Vibration in the Synthesis of in situ Particulate Reinforced Aluminum Matrix Composites,” NADCA Transactions, The North American Diecasting Associations, 2011, T11-042.

  32. F. He, Q. Han, Y.C. Chen, C. Xu, and L. Shao, “Study on mechanical properties of al metal matrix nanocomposites processed using ultrasonic vibration,” ASME International Manufacturing Science and Engineering Conference MSEC, vol. 2, (2009), pp. 285 (MSEC2009-84197). New York: ASME Publishing.

  33. C. Braver, M. Tumey, A. Harlow, Q. Han, “The effect of ultrasonic treatment on fiber-reinforced composite materials,” ASME International Manufacturing Science and Engineering Conference MSEC, vol. 1 (2009),  pp. 547 (MSEC2009-84149). New York: ASME Publishing.

  34. Rakita, M., & Han, Q. (2009). Simulation of Solidification Defects for Prediction of Dross Formation in Aluminum 5182 Remelt Secondary Ingot. ASME International Manufacturing Science and Engineering Conference MSEC, vol. 1, (2009), pp. 365 (MSEC2009-84160). New York: ASME Publishing.

  35. Rakita, M., Kakas, D., Skoric, B., Tomovic, M., Han, Q., & Jackson, M. (2009). S-Type Cultivator Tines which Comply with ISO Standard: FEM Analysis of Stresses and Manufacturing Issues. ASME International Manufacturing Science and Engineering Conference MSEC, vol. 1, pp. 373 (MSEC2009-84162). New York: ASME Publishing.

  36. S.K. Poola,., Q. Han, C. Corum, C., Xu,  & L. Shao: “Grain Refinement of AZ91E Alloy Using Ultrasonic Vibrations,” Magnesium Technology 2009, Warrendale: The Minerals, Metals & Materials Society, 2009, 315-319.

  37. Q. Han,  “The Effect of Microstructure on the Surface Finish of Extruded 6262 Aluminum Alloy Billet,” Aluminum alloys: Fabrication, Characterization and Applications, Warrendale: The Minerals, Metals & Materials Society, 2009, 95-100.

  38. Q. Han: “Ultrasound Assisted Die Casting Process,” NADCA Transactions, The North American Die Casting Association, 2009, T09-113.

  39. Q. Han, S. Viswanathan, K.L. More, M.J. Warwick, Y.C. Chen, “Bonding of Steel Inserts During Aluminum Casting,” TMS 2008 Annual Meeting Supplement Proceedings, Vol 3: General paper Selections, 2008, pp. 339-344.

  40. K. Currie, Q. Han, M. Abdelrahman, and J. Droke, “Characterization of AM60B Magnesium Castings Using a Counter Gravity (Hitchiner) Lost Foam Casting Process,” Magnesium Technology 2008, eds. N. Pekguleryuz, N. Neelameggham, R. Beals, and E. Nyberg, (Warrendale, PA: The Minerals, Metals & Materials Society, 2008), pp. 203-208.

  41. Q. Han, and P. Sklad(Invited), “Ultrasonic Processing of Materials,” Proceedings of the Third International Conference on Light Metals Technology, September 24-26, 2007, Saint-Sauveur, Quebec, Canada

  42. Q. Han, H. Xu, T.T. Meek, P. Ried, and P. Olson, “An Accelerated Method for Soldering Testing, “ NADCA Transactions 2007, paper T07-041.
  43. Q. Han, R. Dinwiddie, P. Sklad et al, “Comparison of Lost Foam Casting of AM60B Alloy and A356 Alloy, “ AFS Transactions 2007, Paper 07-147.
  44. Q. Han, “The Use of Power Ultrasound for Material Processing,” Materials Processing under the Influence of External Fields,” eds. Q. Han, G. Ludtka, and Q. Zhai, (Warrendale, PA: The Minerals, Metals & Materials Society, 2007), pp. 97-106.
  45. Q. Liu, Y Gao, F. Qi, Q. Zhai, and Q. Han, “Influence of Power Ultrasonic on Solidification Structure and Segregation of 1Cr18Ni9Ti Stainless Steel,” Materials Processing under the Influence of External Fields,” eds. Q. Han, G. Ludtka, and Q. Zhai, (Warrendale, PA: The Minerals, Metals & Materials Society, 2007), pp. 107-112.
  46. H. Xu, T.T. Meek, Q. Zhai, and Q. Han, “Degassing of Molten Aluminum Using Ultrasonic Vibrations,” Materials Processing under the Influence of External Fields,” eds. Q. Han, G. Ludtka, and Q. Zhai, (Warrendale, PA: The Minerals, Metals & Materials Society, 2007), pp. 123-132.
  47. Q. Han, R. Dinwiddie, P. Sklad, K. Currie, F. Vondra, M. Abdelrahman, G.V. Walford, D. Nolan, and T. Nedkova, “Lost Foam Casting of Magnesium Alloys,” Magnesium Technology 2007, eds. R.S. Beals, M.O. Pekguleryuz, A. Lou, and N.R. Needlameggham, (Warrendale, PA: The Minerals, Metals & Materials Society, 2007), pp. 115-120.
  48. S.J. Zhang, Q. Han, and Z.K. Liu, “Thermodynamic Investigation of Na-Induced Embrittlement in Mg-Li Alloys,” Symposium GG: Multiscale Modeling of Materials, MRS 2006 Fall Meeting, Boston, MA, USA, November 27-30, 2006.
  49. X. Jian, T.T. Meek, T. Geer, and Q. Han, “Effect of Power Ultrasound on Grain Refinement of Magnesium AM60B Alloy” Magnesium Technology 2006,, pp. 103-107.
  50. J. Clark III, A. Thekdi, S. Ninqileri, Q. Han, “Reconsideration of Natural-Gas Immersion Burners to Melt Recycled Aluminum,” Materials Science and Technology, Vol.3, Materials Science and Technology 2005 – Proceedings of the Conference, p. 3-9.
  51. A.L. Bowles, Q, Han, and J.A. Horton, “Castability of Magnesium Alloys,” Magnesium Technology 2005, pp. 99-104.
  52. H. Xu, T.T. Meek, and Q. Han, “Ultrasonic Degassing in Aluminum Alloys,” Materials Science and Technology, V1, Materials Science and Technology 2005-Proceedings of the Conference, Pittsburgh, PA, USA, 2005, pp.3-11.
  53. X. Jian, C. Xu, T.T. Meek, and Q. Han, “The Effect of Ultrasonic Vibration on the Solidification Structure of A356 Alloy,” AFS Transactions, 2005, Paper No. 05-085.
  54. Q. Han, “An Experimental Die for Testing the Castability of Die Casting Alloys,” NADCA Transaction, 2005, Paper No. 05-087.
  55. M. Du, Q. Han, and R. Peterson, “Detection of Water Content in Aluminum Scrap with a Fast Neutron Source (Cf-252)”, Light Metals 2005, ed. H. Kvande, (Warrendale, PA: The Minerals, Metals & Materials Society, 2005), pp. 855-859.
  56. B.M. Golchert, C.Q. Chou, A. Quenette, Q. Han, P.E. King, “Combustion Space Modeling of An Aluminum Furnace,” Light Metals 2005, ed. H. Kvande, (Warrendale, PA: The Minerals, Metals & Materials Society, 2005), pp. 887-892.
  57. P.E. King, M.C. Hayes, T. Li, Q. Han, M. Hassan, and B.M. Golchert, “Design and Operation of An Experimental Reverberatory Aluminum Furnace,” Light Metals 2005, ed. H. Kvande, (Warrendale, PA: The Minerals, Metals & Materials Society, 2005), pp. 899-904.
  58. H. Xu, X. Jian, T.T. Meek, and Q. Han, “Ultrasonic Degassing of Molten Aluminum under Reduced Pressure,” Light Metals 2005, ed. H. Kvande, (Warrendale, PA: The Minerals, Metals & Materials Society, 2005), pp. 915-919.
  59. Z. Long, Q. Han, S. Viswanathan, S. Ningileri, S.K. Das, K. Kuwana, M. Hassan, M. Khraisheh, A. Sabau, and K. Saito, “Integrated 3D Model to Simulate Solidification and Predict Hot Cracking during DC Casting of Aluminum Alloys,” Light Metals 2005, ed. H. Kvande, (Warrendale, PA: The Minerals, Metals & Materials Society, 2005), pp. 1057-1062.
  60. Q. Han, “The Use of Computational Thermodynamics for Die Casting Applications,” NADCA Transactions 2004, Paper T1-051.20.  Q. Han, “Dross Formation during Solidification of Aluminum 5182 Alloy RSI” Transactions of the American Foundry Society, v. 112, 2004, paper 04-063.21.  Q. Han, “Influence of Chemical Composition on Hot Tearing Susceptibility of FXS-414 alloy,” Transactions of the American Foundry Society, v. 112, 2004, paper 04-062.
  61. Q. Han, R.D. Peterson, and J. Zeh, “Some of the Factors that Affect Dross Formation in Aluminum 5182 RSI,” Light Metals 2004, ed. A.T. Tabereaux, (Warrendale, PA: The Minerals, Metals & Materials Society, 2004), pp. 163-168.
  62. Q. Han, M.I. Hassan, S. Viswanathan, K.Sato, and S.K. Das, “An Experimental Method for Determining Mechanical Properties in the Non-Equilibrium Mushy Zones of Alloys,” Solidification of Aluminum Alloys, eds. M.G. Chu, D.A. Granger, and Q. Han, (Warrendale, PA: The Minerals, Metals & Materials Society, 2004), pp. 211-220.
  63. X. Jian, Q. Han, H. Xu, and T.T. Meek, “Solidification of Aluminum Alloy A356 Under Ultrasonic Vibration”, Solidification of Aluminum Alloys, eds. M.G. Chu, D.A. Granger, and Q. Han, (Warrendale, PA: The Minerals, Metals & Materials Society, 2004), pp.73-79.
  64. H. Xu, X. Jian, T.T. Meek, Q. Han, “Investigation of Ultrasonic Degassing in Molten Aluminum A356 Alloy,” Light Metals 2004, ed. A.T. Tabereaux, (Warrendale, PA: The Minerals, Metals & Materials Society, 2004), pp. 731-735.
  65. Q. Han, “Dross Formation in Aluminum-Magnesium Alloy RSI,” LiMat-3rd International Conference on Light Materials for Transportation Systems, Hawaii, USA, November 2-6, 2003.
  66. X. Jian, H. Xu, T.T. Meek, Q. Han, and S. Viswanathan, “Ultrasonic Solidification of Aluminum A356 Alloy,” LiMat-3rd International Conference on Light Materials for Transportation Systems, Hawaii, USA, November 2-6, 2003.
  67. H. Xu, X. Jian, T.T. Meek, and Q. Han, “Ultrasonic Degassing in Aluminum A356 Alloy,” LiMat-3rd International Conference on Light Materials for Transportation Systems, Hawaii, USA, November 2-6, 2003.
  68. T. Li, M. Hassan, K. Kuwana, K. Saito, S. Viswanathan, and Q. Han, “Thermodynamic Analysis of Energy Utilization and Pollutant Formation Control in Secondary Aluminum Melting Furnaces,” Energy Efficient Manufacturing Processes (The MPMD Fourth Global Innovations Symposium), eds, I.E. Anderson, T.G. Marechaux, and C. Cockrill, (Warrendale, PA: The Minerals, Metals & Materials Society, 2003), pp. 43-51.
  69. Q. Han, W.A. Simpson, J.L Zeh, E.A. Kenik, P. Angelini, and V.K.Sikka, “The Effect of Solidification Defect on the Dross Formation During Re-melting of Aluminum 5182 Alloy RSI,” Light Metals 2003, ed. P.N. Crepeau, (Warrendale, PA: The Minerals, Metals & Materials Society, 2003), pp. 773-777.
  70. Q. Han, and S. Viswanathan, “Optimization of Aluminum 357 Alloy for Semi-Solid Metal Casting,” NADCA Transactions, 2002, T02-32.
  71. Q. Han, and S. Viswanathan, “Mechanism of Die Soldering during Aluminum Die Casting,” NADCA Transactions, 2002, T02-034.
  72. S. Viswanathan, C.A. Blue, Q. Han, G. Engleman, and N.B. Dahotre, “High Density Infrared Coatings for Soldering Resistance,” NADCA Transactions, 2002, T02-044.
  73. Q. Han and S. Viswanathan, D.L. Spainhower, and S.K. Das, “Nature and Formation of Surface Cracks in DC Cast Ingots,” Light Metals 2002, ed. W. Scheider, (Warrendale, PA: The Minerals, Metals & Materials Society, 2002), pp. 975-979.
  74. S. Viswanathan, A.S. Sabau, Q. Han, and A.J. Duncan, “Prediction of Microporosity Distributions in Aluminum Alloy Castings,” Proceedings of the Merton C. Flemings Symposium on Solidification and Materials Processing, eds R. Abbaschian, H. Brody, and A. Mortensen, (Warrendale, PA: The Minerals, Metals & Materials Society, 2001), pp.379-384.
  75. Q. Han, E.A. Kenik, R. Agnew, and S. Viswanathan, “Solidification Behavior of Commercial Magnisum Alloys,” Magnesium Technology 2001, ed. J. Hryn, (Warrendale, PA: The Minerals, Metals & Materials Society, 2001), pp.81-86.
  76. E.A. Payzant, S.R. Agnew, Q. Han, and S. Viswanthan, “Mg17Al12 Phase Precipitation Kinetics in Die Casting Alloys AZ91D and AM60B,” Magnesium Technology 2001, ed. J. Hryn, (Warrendale, PA: The Minerals, Metals & Materials Society, 2001), pp. 183-188.
  77. S. R. Agnew, S. Viswanathan, E. A. Payzant, Q. Han, K. C. Liu, and E. A. Kenik, "Tensile and Compressive Creep Behavior of Magnesium Die Casting, Alloys Containing Aluminium," Magnesium Alloys and Their Applications, ed. K.U. Kainer, (Weinbein, Germany: Wiley-VCH Verlag, 2000) pp.687-692.
  78. Q. Han and S. Viswanathan, “Microstructure Prediction in A356 Alloy Castings,” Light Metals 2000, ed. R.D. Peterson, (Warrendale, PA: The Minerals, Metals & Materials Society, 2000), pp. 609-614.
  79. Q. Han, E.A. Kenik, and S. Viswanathan, “Die Soldering in Aluminum Die Casting,” Light Metals 2000, ed. R.D. Peterson, (Warrendale, PA: The Minerals, Metals & Materials Society, 2000), pp. 765-772.
  80. A.J. Duncan, Q. Han and S. Viswanathan: “Liquid Permeability Measurements in Solidifying Aluminum-Copper Alloys,” Fluid Flow Phenomena in Metals Processing, eds. N. El-Kaddah, D.G.C. Robertson, S.T. Johansen and V.R. Voller, (Warrendale, PA: The Minerals, Metals & Materials Society, 1999), pp.525-532.
  81. A.S. Sabau, Q. Han and S. Viswanathan: “Projection Methods for Interdendritic Flows,” Fluid Flow Phenomena in Metals Processing, eds. N. El-Kaddah, D.G.C. Robertson, S.T. Johansen and V.R. Voller, (Warrendale, PA: The Minerals, Metals & Materials Society, 1999), pp.403-411.
  82. S. Viswanathan, A.J. Duncan, S.A. Sabau, Q. Han, W.D. Porter and B.W. Riemer: “Modeling of Solidification and Porosity in Aluminum Alloy Castings,” AFS Transactions, 98-103 (1998), pp. 411-417.
  83. S. Viswanathan, A.S. Sabau, Q. Han and A.J.Duncan: “Modeling of Porosity in Aluminum Alloy Castings,” Proceedings from Materials Solutions Conference ’98 on Aluminum Casting Technology, 1998, pp. 135-138..
  84. S. Viswanathan, A.J. Duncan, A.S. Sabau and Q. Han: “Prediction of Microporosity in Aluminum Alloy Castings,” Modeling of Casting, Welding and Advanced Solidification Processes-VIII, Eds. B.G.Thomas and C. Beckermann, (Warrendale, PA: The Minerals, Metals & Materials Society, 1998), pp. 849-856.
  85. X. Wan, Q. Han, and J.D. Hunt: “Experimental Studies on the Transition from Regular to Irregular Dendritic Growth,” Solidification Processing 1997, eds. J. Beech and H. Jones, (Ranmoor House, Sheffield, England, 1997), pp. 397-400.
  86. Q. Han, X. Wan and J.D. Hunt: “Experimental Investigation on the Spacing of Dendrite Arrays,” TMS Spring Meeting, Anaheim, USA, Feb. 1996.
  87. Q. Han and J.D. Hunt: “Numerical Modeling of the Growth of a Cellular/Dendritic Array in Multi-component Alloys,” MRS Fall Meeting, Boston, USA.,Dec 3-7, 1996.
  88. Q. Han and J.D. Hunt: “Criteria for Particle Pushing,” Proceeding of the Second Young Scientist Congress, (Beijing, China, 1995), pp. 81-85.
  89. J. D. Hunt, Q. Han, and S-Z Lu: “Numerical Modeling of Cellular/Dendritic Array Growth,” Keynote paper at the International Symposia on Advanced Materials and Technology for the 21st Century, JIM and TMS, Hawaii, USA, Dec.1995.
William Hutzel

Journals

  1. Koch, D.C, Hutzel, W.J., Kutch, J.M., and Holt, E.A. (2011). Toward a zero energy home:  applying Swiss building practices/attitudes to U.S. residential construction.  The Journal of Technology Studies, Vol. 37, No. 2, pp 18-26.
  2. Handy, R.G., Rodgers, K.L., Wang, J.A., Tumey, M.S., Rodriguez, D.L. and Hutzel, W.J., (2010). The characterization of aerosol particle contamination as the result of carry-over and cross-over in enthalpy wheels.  International Journal of Nanoparticles, Vol. 3, No. 4, pp 378-389.
  3. Koch, D.C., Kutch, J.M., Hutzel, W. J., and Holt, E.A., (2010). Comparison of U.S. and Swiss homes in the area of energy efficiency. The Technology Interface Journal, Vol. 10, No. 3, Retrieved from http://technologyinterface.nmsu.edu/Spring10, pp 1-13.
  4. Boregowda, S., Handy, R.G., and Hutzel, W.J., (2007). Thermodynamic assessment of human-thermal interaction. International Journal of Design and Nature, Vol. 2, No. 4, pp 310-318.
  5. Hutzel, W.J. and Healy, W. M., (2006).  Remotely accessed photovoltaic power experiment. Journal of Engineering Technology, Vol 23, No 1, pp 32-39.
  6. Hutzel, W. J., (2002). A remotely accessed HVAC laboratory for distance education. International Journal of Engineering Education, Vol 18, No 6, pp 711-716.
  7. Hutzel, W. J., Carson, J. M., and Peters, R.E., (1998).  The Purdue‘experiment’. Engineered Systems, Vol 15, No 9, pp 90-94.
  8. Hutzel, W. J. and Amini, A., (1995).  Field-testing a new locator device:  the UTD POLO System. No-Dig Engineering, Vol 2, No 3, pp 13-16.

Refereed Articles and Conference Papers/Presentations

  1. Hutzel, W. J., Shaurette, M.E. and Loss, B.W. (2012).  Competing in the 2011 Solar Decathlon. Proceedings of the 2012 ASEE Annual Conference, American Society for Engineering Education, San Antonio, TX, 12 p.
  2. Wallpe, Jordan, Hutzel, William, Lasker,  Gregory, and Cory, Clark, (2012) Evaluating Net-Zero Energy Houses from the U.S. Department of Energy Solar Decathlon 2011, Proceedings of the 2012 Construction Research Congress, Purdue University, IN
  3. Wallpe, Jordan and Hutzel, William, (2012), Engineering the INhome; Purdue's net-zero energy home for the U.S. Department of Energy Solar Decathlon 2011, Proceedings of the 2012 Summer Study on Energy Efficiency in Buildings, American Council for an Energy Efficient Economy, Asilomar, CA.
  4. Rodgers, Kevin, Hutzel, William, Dana, Michael, (2012), Biofiltration in a Highly Efficient Residential Home, Proceedings of 2012 Purdue High Performance Buildings Conference, West Lafayette, IN.
  5. Hutzel, W. J., Kilmer, W., Kilmer, R., Cory, C., Horton, W., Shaurette, M., Qian, Z., Hassan, R. And Day, J. (2011).  Preparing for the 2011 Solar Decathlon. Proceedings of the 2011 ASEE Annual Conference, American Society for Engineering Education, Vancouver, B.C., 9 p.
  6. Hutzel, W. J. and Parker, T. (2011).  Solar Workforce Development in the Midwest. Proceedings of the 2011 ASEE Annual Conference, American Society for Engineering Education, 6 p.
  7. Hutzel, W. J. Wilson, S., and Faiola, J.F. (2010). Performance of HVAC system with solar reheat. Proceedings of Purdue’s High Performance Buildings Conference, West Lafayette, IN, 8 p.
  8. Hutzel, W. J. and Glawe, D.D. (2009). S&T fellowship experiences in Washington, D.C. Proceedings of the ASME Energy Sustainability Conference, San Francisco, CA, pp 57-63.
  9. Hutzel, W. J. and Odukomaiya, S. (2009). Optimizing Comfort and Energy Use in Reheat Systems. Proceedings of the ASME Energy Sustainability Conference, San Francisco, CA, pp 261-270.
  10. Hutzel, W. J., Koch, D.C., Kutch, J.M., and Furter, R. (2009). Comparison of U.S. and Swiss Homes & Lifestyles, Proceedings of the ASME Energy Sustainability Conference, San Francisco, CA, pp 253-260.
  11. Bertsch, S.S., Groll, E. A., Bouffard, D.B., and Hutzel, W.J., (2006), Air Source Heat Pump for Northern Climates II:  Measurement & Verification. Proceedings of 2006 International Refrigeration and Air Conditioning Conference, West Lafayette, IN,  8 p.
  12. Hutzel, W. J. and Furter, R., (2006).  International partnership for evaluating heat recovery equipment. Proceedings of the 2006 ASEE Annual Conference, American Society for Engineering Education, 9 p.
  13. Hutzel, W. J. and Furter, R., (2005).  International Partnership Using Remotely Accessed Labs. Proceedings of the 2005 Frontiers in Education Conference, American Society for Engineering Education, pp T4D-1-T4D-6.
  14. Hutzel, W. J., Cooper, H.L., and Leach, S.E., (2005).  Evaluating a remotely accessed energy laboratory. Proceedings of the 2005 ASEE Annual Conference, American Society for Engineering Education, pp 5899-5910.Best Paper Award for papers sponsored by the Energy Conversion & Conservation Division.
  15. This paper received the Best Paper Award for papers sponsored by the Energy Conversion & Conservation Division of ASEE.
  16. Hutzel, W. J. and Goodman, D. W., (2004).  Remotely accessible solar energy laboratory for high school students. Proceedings of the 2004 Frontiers in Education Conference, American Society for Engineering Education, pp S2D-18-S2D-22.
  17. Hutzel, W. J. and Kulatunga, N. A. (2002).  Design of a photovoltaic power system. Proceedings of the 2002 ASEE Annual Conference & Exposition, American Society for Engineering Education, pp 2529-2537.
  18. Hutzel, W. J. (2001).  Energy conservation in thermal power courses. Proceedings of the 2001 Annual Conference & Exposition, American Society for Engineering Education, pp 4167-4174.
  19. Hutzel, W. J. (2001).  Creating a virtual HVAC laboratory for continuing/distance education. Proceedings of the 2001 International Conference on Engineering Education, Oslo, Norway, 4 p.
  20. Hutzel, W. J. (2000).  Leveraging campus resources for HVAC laboratory development. Proceedings of the 2000 Annual Conference & Exposition, American Society for Engineering Education, pp 4077-4081.
  21. Hutzel, W. J. (1999).  Digital controls for an active solar collector loop. Proceedings of the 1999 ASME International Mechanical Engineering Congress & Exposition, Paper No 99-IMECE/MET-1.
  22. Hutzel, W. J., Dewitt, W. E., and Skvarenina, T. L. (1999).   An interdisciplinary facilities engineering graduate course. Proceedings of the 1999 Annual Conference & Exposition, American Society for Engineering Education, pp 733-739.
  23. Hutzel, W. J. (1998).  Building automation for a laboratory hydronic system. Proceedings of the 1998 ASME International Mechanical Engineering Congress & Exposition, Paper No 98-WA/MET-2, pp 1-4.
  24. Hutzel, W. J. (1998).  Development of a building automation laboratory. Proceedings of the 1998 Annual Conference & Exposition, American Society for Engineering Education, 6 p.
  25. Hutzel, W. J. and Pagano, M. A. (1997).  Design of a Foucault Pendulum museum exhibit. Proceedings of the 1997 ASME International Mechanical Engineering Congress & Exposition, Paper No 97-WA/MET-5, pp 1-4.
  26. Hutzel, W. J., Kraebber, H. W., and Thomas, C. R. (1997).  How many credits for an MET degree?. Proceedings of the 1997 Illinois/Indiana Section Conference, American Society for Engineering Education, pp. 126-133.
  27. Hutzel, W. J., Achor, P. D., Barnett, R. H., Eiff, M. A., Harding, B. A., and Kostek, T. E. (1997).  Sharpening pencils and young minds. Proceedings of the 1997 Annual Conference & Exposition, American Society for Engineering Education, 10 p.
  28. Best Paper Award for papers sponsored by the Design in Engineering Education Division.
  29. Hutzel, W. J. (1996).  An interdisciplinary solar energy project. Proceedings of the 1996 Frontiers in Education Conference, American Society for Engineering Education, pp 695-698.
  30. Hutzel, W. J. and Koontz, J. R. (1996).  Development of an interdisciplinary HVAC course. Proceedings of the 1996 Annual Conference & Exposition, American Society for Engineering Education, pp 1165-1170.
  31. Hutzel, W. J. (1995).  Maintaining continuity in a statewide heat power course. Proceedings of the 1995 ASME International Mechanical Engineering Congress & Exposition, Paper No 95-WA/MET-3, pp 1-4.
  32. Hutzel, W. J. (1995).  Keeping in touch with industry. Proceedings of the 1995 World Conference on Engineering Education, Technology Based Education Consortium of the William C. Norris Institute, Vol 2, pp. 226-228.
  33. Best Paper Award for the Engineering Technology Division at the Conference

Patents

  1. U.S. patent #7,654,1041 (2010), Heat Pump with Two Stage Compression - economizing and oil management
  2. U.S. patent #7,810,353 (2010), Heat Pump with Two Stage Compression - capacity control for two stage compression
  3. U.S. patent #5,193,628 (1993), Method and apparatus for determining path orientation of a passageway (issued for an earth drill guidance device for in-situ environmental restoration at toxic waste sites)
Ayhan Ince

SELECTED JOURNAL PUBLICATIONS

  1. Ince, A., Glinka, G. and Buczynski, A.,  “A Computational Modeling Technique of Elasto-Plastic Stress-Strain Response for Notched Components”, International Journal of Fatigue, Vol.62, pp. 42-52,  2014.
  2. Ince, A. and Glinka, G.,  “A Generalized Damage Parameter for Multiaxial Fatigue Life Prediction under Proportional and Non-Proportional Loadings”, International Journal of Fatigue, Vol.62, pp. 34-41,  2014.
  3. Ince, A., “Computational Fatigue Modeling of Notched Components”, Modeling and Numerical Simulation of Material Science, Vol.3, No.3A, p.14-22, 2013.
  4. Ince, A. and Glinka, G., “A Numerical Method for Elasto-Plastic Notch-Root Stress-Strain Analysis,” Journal of Strain Analysis for Engineering Design, Vol. 48, No. 4, pp. 229-224, 2013.
  5. Noban M., Jahed H., Ibrahim E. and Ince, A., “Load path sensitivity and fatigue life estimation of 30CrNiMo8HH”, International Journal of Fatigue, Vol.37, pp.123–133, 2012.
  6. Ince, A. and Glinka, G., “A modification of Morrow and Smith-Watson-Topper mean stress correction models”, Fatigue and Fracture of Engineering Materials and Structures, Vol.34, pp.854–867, 2011.
  7. Noban, M., Jahed, H., Winkler, S. and Ince, A., “Fatigue characterization and modeling of 30CrNiMo8HH under multiaxial loading”, Materials Science and Engineering A, 528 (6), 2484-2494, 2011.

SELECTED CONFERENCE PAPERS

  1. Ince, A. and Glinka G., “Innovative Computational Modeling of Multiaxial Fatigue Analysis for Ground Vehicle Notched Component”, International Conference on Fatigue Damage of Structural Materials X, Hyannis, MA, USA, 2014.
  2. Ince,  A., "A Novel Technique for Computational Multiaxial Fatigue Modeling of Notched Components", ASME 2013 Mechanical Engineering Congress & Exposition, San Diego, CA, USA, 2013.
  3. Ince, A., Glinka, G. and Buczynski, A., “A Critical Plane Damage Parameter for Multiaxial Fatigue Life under Proportional and Non-proportional Loadings”, International Conference on Fatigue Damage of Structural Materials IX, Hyannis, MA, USA, 2012.
  4. Ince,  A. and Glinka G., “Computational Modeling of Multiaxial Elasto-plastic Stress-strain Analysis for Notched Components under Non-proportional Loading”, International Conference on Fatigue Damage of Structural Materials IX, Hyannis, MA, USA, 2012.
  5. Noban, M., Jahed, H. and Ince, A., “Loading phase angle effect on multiaxial behaviour of 30CrNiMo8HH”, 9th International Conference on Multiaxial Fatigue and Fracture, ICMFF9, Parma, Italy, June 2010.
J Jacob

Textbooks

  1. Analog Integrated Circuits Applications, 2000, Prentice-Hall
  2. Power Electronics: Principles & Applications, 2002, Delmar
  3. Advanced AC Electronics:Principles & Applications, 2004, Delmar
Henry Kraebber

Selected journal articles and conference papers

  1. Kraebber, H & Lehman, J. (2009). Use of Educational Technology in Manufacturing Engineering and Technology Education. 39th ASEE/IEEE Frontiers in Education Conference, October 2009. San Antonio, TX.
  2. Dues, J., Fuehne, J., Cooley, T., Denton, N., & Kraebber, H. (2008). Assessment for continuous improvement: Embedding it in the culture. Journal of Engineering Technology, 25(2), 10-17.
  3. Denton, N., Fuehne, J., Kraebber, H., Dues, J., & Cooley, T. (2007). The TC2K visit is done – now what?. [CD-ROM]. Proceedings of the 2007 Annual Conference, American Society for Engineering Education, Honolulu, HI.
  4. Kraebber*, H. W., Hartin, J. R., & Denton, N. D. (2005). Developing an educational process for an engineering technology program. [CD-ROM]. Proceedings of the 2005 Annual Conference, American Society for Engineering Education, Portland, OR.

Study Guides and/or Workbooks

  1. Contributed to a 70 course module series sponsored by the National Science Foundation that makes up the "novel" curriculum design for manufacturing engineering technology for the National Center of Manufacturing Education in Dayton, Ohio. Prof. Kraebber was responsible for the selection of authors and reviewers for these modules. He served as a co-author of approximately one third of each module and leader of the review process for all written material.
  2. Martin, T., Kraebber, H., & Stephens, M. (2003). Manufacturing Facilities Design. National Center of Excellence for Advanced Manufacturing Education. Dayton, OH: Sinclair Community College, 120 pages.
  3. Elliott, S. J., Hilbert, G. A. & Kraebber, H. W. (2003). Data Acquisition and Analysis. National Center of Excellence for Advanced Manufacturing Education. Dayton, OH: Sinclair Community College, 83 pages.
  4. Anderson, R., Castillo, A., Kraebber, H., & Lunn, T. (2002). Manufacturing resource planning. National Center of Excellence for Advanced Manufacturing Education. Dayton, OH: Sinclair Community College, 120 pages.
  5. Anderson, S., Kraebber, H., & Martin, T. (2001). Equipment selection. National Center of Excellence for Advanced Manufacturing Education. Dayton, OH: Sinclair Community College, 103 pages.
  6. Gross, J., Kraebber, H., & Larsh, B. (2001). Manufacturing work cell design. National Center of Excellence for Advanced Manufacturing Education. Dayton, OH: Sinclair Community College, 119 pages.

Textbooks

  1. Professor Kraebber is co-author with James Rehg of the text, Computer Integrated Manufacturing, 3rd ed, (2005).
  2. Dr. Kraebber's work has published in journals and confernece proceedings on teaching in manufacturing. Please send a message to request specific publications or for information about the textbook. kraeb@purdue.edu
Jan Lugowski

Published journal articles

  1. Lugowski, J. (1988). Harmonic-Drive-Getriebe selbst bauen  [How to Build a Harmonic Drive]. Werkstatt und Betrieb 121, No. 2, pages 109-111.
  2. Lugowski, J. (1985). Adaptives Grenzregelsystem einer Flachschleifmachine [An Adaptive Constraint Control System for a Surface Grinder]. Werkstatt und Betrieb 118, No. 4, pages 201-204.    
  3. Lugowski, J. (1992). Flow Force Compensation in a Hydraulic Valve. Sterowanie i Naped Hydrauliczny [Hydraulic power and Control], Vol. 12, No. 2, p. 22 (in Polish).
  4. Lugowski, J. (1991). Flow forces in a Spool-Type Hydraulic Valve. Sterowanie i Naped Hydrauliczny [Hydraulic power and Control], Vol. 11, No. 6, pages 15-20 (in Polish).

Reviewed conference proceedings (with presentation)

  1. Lugowski, J.T. (2003). Design Class Projects in Fluid Power. Proceedings of the American Society for Engineering Education (ASEE) – Annual Conference, June 22-25, CD-ROM - Session 3648, 10 msp. Nashville, Tennessee.
  2. Lugowski, J.T. (2003). Critical-Thinking Approach to Teaching Mechanical Engineering. Proceedings of the ASEE– Annual Conference, June 22-25, CD-ROM - Session 3449, 4 msp. Nashville, Tennessee.
  3. Lugowski, J.T. (2003). Introducing State-Of-The-Art Technology Into Fluid Power Laboratory. Proceedings of the ASEE – IL/IN Sectional Conference, April 4-5, - Session 2C, 4 msp. Valparaiso, Indiana.
  4. Lugowski*, J.T., Widmer*, S.E. (2002). Problem Based Learning of Data Acquisition and Computer-Based Control Applications in MET Courses. Proceedings of the ASEE – Annual Conference, June 16-19, CD-ROM - Session 2359, 11 msp. Montreal, Quebec.
  5. Lugowski, J.T. (2002). Development of a Competency-Based Introductory Course in Fluid Power. Proceedings of the ASEE – Annual Conference, June 16-19, CD-ROM - Session 1449, 8 msp. Montreal, Quebec.
  6. Lugowski, J.T. (2002). Good Problems for Fluid Power and Controls Courses. Proceedings of the ASEE – IL/IN Sectional Conference, April 11-12, (pages 217-221). Chicago, Illinois.
  7. Lugowski, J.T. (2001). Using Rapid Prototyping to Integrate Design into a Course. Proceedings of the ASEE – Annual Conference, June 24-27, CD-ROM - Session 2650, 11 msp. Albuquerque, New Mexico.
  8. Lugowski, J.T. (2001). Mastering a LabVIEW Program within one Lab Session. Proceedings of the ASEE – IL/IN Sectional Conference, March 29-31, 5 msp. Session S4-4. West Lafayette, Indiana.
  9. Denton*, N. L., Lugowski*, J., Knoll, J. (2000). Evaluation of an Industry Project in a Freshman Course. Proceedings of the ASEE – Annual Conference, June 18-21, CD-ROM - Session 2647, 9 msp. St. Louis, Missouri.
  10. Lugowski, J. (2000). Static-Pressure Measurements in the Orifice of a Hydraulic Valve. Proceedings of the American Society of Mechanical Engineers (ASME)  - Fluids Engineering Division Summer Meeting, June 11-15, CD-ROM paper No. FEDSM2000-11124, 5 msp. Boston, Massachusetts.
  11. Lugowski, J. (1999). One of the Mysteries in Fluid Mechanics. American Society for Engineering Education (ASEE) – Annual Conference, June 20-23, CD-ROM - Session 3548, 5 msp. Charlotte, North Carolina. This paper received a “Best Session Paper Award.”
  12. Lugowski, J. (1993). The Origin of the Flow Force in Hydraulic Valves. Proceedings of the 8th International Conference on Pneumatics and Hydraulics, pages 390-395 (in German). Miskolc, Hungary.
  13. Lugowski, J. (1993). The Source of the Flow Force in Hydraulic Piston Valves. Proceedings of the 9th Conference on Hydraulics and Pneumatics, pages 373-378 (in German). Dresden, Germany.
  14. Lugowski, J. (1993). Experimental Investigations of the Origin of Flow Forces in Hydraulic Piston Valves. In N. Way (Ed.), Proceedings of the International Conference on Fluid Power—the Future for Hydraulics, Brugge, Belgium, pages 233-244. London: Mechanical Engineering Publications Ltd.
  15. Lugowski, J. (1991). Flow Force Compensation in a Hydraulic Piston Valve. Proceedings of the 22nd Midwestern Mechanics Conference, pages 503-504. Rolla: University of Missouri-Rolla.
  16. Lugowski, J. (1991). Flow Forces in a Spool-Type Hydraulic Valve. Proceedings of the 22nd Midwestern Mechanics Conference, pages 374-375. Rolla: University of Missouri-Rolla.
  17. Batsch, A.* and Lugowski*, J. (1985). Dynamic Characteristics of the Hydrostatic Bearing as a Measuring Sensor. Proceedings of the 6th Conference on Hydraulics and Pneumatics, pages 561-566 (in German). Magdeburg, Germany.
  18. Lugowski, J. (1983). A Hydraulic Piston Valve with a Strongly Compensated Flow Force. Proceedings of the 5th Conference on Hydraulics and Pneumatics, pages 602-606 (in German). Dresden, Germany.
  19. Batsch*, A. and Lugowski*, J. (1981). Flow Force in a Piston Valve. Proceedings of the 4th Conference on Hydraulics and Pneumatics, pages 498-504 (in German). Magdeburg, Germany.
  20. Lugowski, J. (1980). An Analogue Model of an Adaptive Constraint Control System of a Surface Grinder. Proceedings of the International Conference on Adaptive Control in Mechanical Engineering AC’80, pages 184-193 (in Polish). Rydzyna, Poland.
  21. Lugowski, J. (1977). An Adaptive Constraint Control (ACC) System of a Surface Grinder. Proceedings of the Mechanical Engineering Committee of the Polish Academy of Sciences, pages 31-36 (in Polish). Rzeszow, Poland.

Published abstracts

  1. Lugowski, J. (2002). Fluid Power Education at Purdue. ASME Fluid Power Systems and Technology Division Newsletter, page 9. Spring edition.
  2. Lugowski, J. (1988). A Hydrostatic Bearing. Machine Design, September 8, page 36.

Patents

  1. Batsch*, A., and Lugowski*, J. (1986). Polish patent No. 131831. Testing Equipment for the Perforating Machine. Warsaw, Poland. Patent Office.
  2. Lugowski, J. (1986). Polish patent No. 141196. A Harmonic Drive. Warsaw, Poland. Patent Office.
  3. Lugowski, J. (1985). Polish patent No. 135336. A Sealing Diaphragm for Hydraulic Control Valves. Warsaw, Poland. Patent Office.
  4. Lugowski, J. (1984). Polish patent No. 133716. A Hydrostatic Bearing. Warsaw, Poland. Patent Office.
  5. Lugowski, J. (1984). Polish patent No. 133718. A Hydrostatic Bearing. Warsaw, Poland. Patent Office.
  6. Lugowski, J. (1984). Polish patent No. 133723. A Metering Valve. Warsaw, Poland. Patent Office.
  7. Lugowski, J. (1984). Polish patent No. 133717. A Hydrodynamic Bearing. Warsaw, Poland. Patent Office.
  8. Batsch*, A., Lugowski*, J. (1981). Polish patent No. 123378. A Hydraulic Valve with a Strongly Compensated Flow Force. Warsaw, Poland. Patent Office.
  9. Batsch*, A., Oczos*, K., and Lugowski*, J. (1981). Polish patent No. 110882. Perforating Machine for Plastic Tubes. Warsaw, Poland. Patent Office.
  10. Batsch*, A., and Lugowski*, J. (1980). Polish patent No. 113308. An ACC System of a Surface Grinder. Warsaw, Poland. Patent Office.                     

International lecture

  1. Flow Force in Hydraulic Valves, Institute for Fluid Power Drives and Controls  (IFAS) at Aachen University (RWTH), Germany. Professor Lugowski presented his research of flow forces in hydraulic valves (in 2003).

Locally published instructional materials

  1. Fletcher*, R.D., Lugowski*, J.T. and Stern*, H. (2002). Fluid Power. Facilitator Guide. 159 pages. National Center of Excellence for Advanced Manufacturing Education, Sinclair Community College, Dayton, Ohio.
  2. Lugowski*, J.T., Hutzel*, W.J. and Denton, N.L. (2002). Controls And Instrumentation For Automation, MET 382 Laboratory Manual. Spring 2003 Edition, 147 pages. Mechanical Engineering Technology, Purdue University, West Lafayette, Indiana: Copymat.
  3. Lugowski, J.T. 2009. MET 334 Advanced Fluid Power Laboratory Manual. 84 pages. Mechanical Engineering Technology, Purdue University, West Lafayette, Indiana: BoilerCopyMaker.
  4. Lugowski, J.T. 2009. MET 432 Hydraulic Control Motion systems Laboratory Manual. 78 pages. Mechanical Engineering Technology, Purdue University, West Lafayette, BoilerCopyMaker.
  5. Lugowski, J.T., Widmer, S.E.(2009). MET 230L Fluid Power Laboratory Manual. 127 pages. Mechanical Engineering Technology, Purdue University, West Lafayette, IN: Learning Systems.
  6. Lugowski, J. (1992). Obrabiarki. Laboratorium [Laboratory of Machine Tools] 2nd ed. upgraded, 109 pages. Department of Mechanical Engineering, Rzeszow, Poland: Rzeszow University of Technology Press.
Milan Rakita

Journal Papers

  1. Rakita, M., Liu, Y., Yin, F., Wang, M., Han, Q. 2013. “Ultrasonic Shot Peening”, International Journal of Computational Materials Science and Surface Engineering, Vol. 5, No. 3, pp. 189-209
  2. Liu, Z.W., Rakita, M., Han, Q., Li, J.G. 2012. “A Developed Method for Fabricating In Situ TiCp/Mg Composites by Using Quick Preheating Treatment and Ultrasonic Vibration”, Metallurgical and Materials Transactions A, Vol. 43, No. 6, pp. 2116-2124
  3. Liu, Z.W., Rakita, M., Han, Q., Li, J.G. 2011. “Microstructural Evolution of Reinforcements in the Remelting In Situ TiC/Al-12Si Composites Treated by Ultrasonic Vibrations”, Materials Research Bulletin, Vol. 46, Iss. 10, pp. 1674-1678
  4. Kakaš, D., Škorić, B., Rakita, M. 2004. “Tribological Behavior of Duplex Coating Improved by Ion Implantation”, Thin Solid Films, Vol. 459, Iss. 1-2, pp. 152-155
  5. Škorić, B., Kakaš, D., Bibić, N., Rakita, M. 2004. “Microstructural Studies of TiN Coatings Prepared by PVD and IBAD”, Surface Science, Vol. 566-568, Pt. 1, pp. 40-44
  6. Škorić, B., Kakaš, D., Rakita, M., Bibić, N., Peruško, D. 2004. “Structure, Hardness and Adhesion of TiN Coatings Deposited by PVD and IBAD on Nitrited Steels”, Vacuum, Vol. 76, Iss. 2-3, pp. 169-172

Peer Reviewed Conference Proceedings

  1. Rakita, M., Han, Q., Liu, Z. 2013. “Strain Rate as a Predictor of Hot Tearing Tendency in AZ 91 Magnesium Alloy”, AFS Transactions, Vol. 121, pp. 467-472 (Best Paper Award, Mg Division, American Foundry Society CastExpo ’13 and 117th Metalcasting Congress, April 6-9, 2013, St. Louis, Missouri, USA)
  2. Rakita, M., Han, Q. 2009. “Simulation of Solidification Defects for Prediction of Dross Formation in Aluminum 5182 Remelt Secondary Ingot”. Proceedings of the ASME International Manufacturing Science and Engineering Conference MSEC 2009 (October 4-7, 2009, West Lafayette, Indiana, USA), Vol. 1, pp. 365-372
  3. Rakita, M., Kakaš, D., Škorić, B., Tomović, M., Han, Q., Jackson, M. 2009. “S-Type Cultivator Tines Which Comply With ISO Standard: FEM Analysis of Stresses and Manufacturing Issues”. Proceedings of the ASME  International Manufacturing Science and Engineering Conference MSEC 2009 (October 4-7, 2009West Lafayette, Indiana, USA), Vol. 1, pp. 373-380
  4. Škorić, B., Kakaš, D., Rakita, M. 2005. “Some Tribological Aspects of the Duplex Coatings with Additional Ion Bombardment”, Proceedings of the ASME World Tribology Congress III (September 12-16, 2005, Washington, USA), paper WTC2005-64218, pp. 513-514
  5. Kakaš, D., Rakita, M., Škorić, B., Novakov, T., Šiljegović, M., Dobrosavljević, A., Spasojević, V., Mitrić, M., Ivković, B. 2005. “Application of IBAD for Duplex Coatings on Carburized Steel”, Proceedings of Vacuum Electron Ion Technologies VEIT (September 12-16, 2005, Sunny Beach, Bulgaria), pp. 88
  6. Kakaš, D., Novakov, T., Škorić, B., Rakita, M. “Ion Beam Surface Modification of Different Tool Steels by Krypton Implantation”, Proceedings of Vacuum Electron Ion Technologies VEIT (September 12-16, 2005,Sunny Beach, Bulgaria), pp. 41
  7. Škorić, B., Kakaš, D., Rakita, M. 2005. “Structural, Mechanical and Tribological Behavior of TiN Coatings with Subsequent Ion Implantation”, Proceedings of the 11th European Conference on Applications of Surface and Interfaces Analysis ECASIA (September 25-30, 2005, Vienna, Austria), pp. 112
  8. Škorić, B., Kakaš, D., Rakita, M. 2005. “Tribological and Microstructural Studies of TiN Coatings Prepared by PVD and IBAD”, 12th International Metallurgy-Materials Congress (September 28-October 2, 2005, Istanbul, Turkey)
  9. Škorić, B., Kakaš, D., Rakita, M. 2005. “Characteristics of Coatings Deposited by PVD and IBAD on Nitrited Steels”, 8th International Symposium Interdisciplinary Regional Research, (Szeged, Hungary)
  10. Kakaš, D., Novakov, T., Škorić, B., Rakita, M., Gregor, M. 2005. “Ion Implantation of Krypton into the Surface Layer of Tool Steels”, Proceedings of the 5th International Conference BALKANTRIB 05 (June 15-18, 2005, Kragujevac, Serbia), pp. 209
  11. Kakaš, D., Škorić, B., Novakov, T., Rakita, M., Bohne, W., Gregor, M., Nešković, N., Dobrosavljević, A. 2005. “Nanomodification of Steel Surface by Krypton”, 1st International Workshop on Nanoscience & Nanotechnology (November 15-18, 2005, Belgrade, Serbia), pp. 186
  12. Škorić, B., Kakaš, D., Rakita, M., Novakov, T. 2005. “Characterization of IBAD Coatings with Additional Ion Bombardment”, Eight TESLA Workshop: Nanoscience and Biomedicine with Ion Beams (April 18-20 2005, Belgrade, Serbia), pp. 39
  13. Rakita, M., Kakaš, D., Škorić, B., Novakov, T. 2005. “Deposition of Industrial Scale Hard Coatings by IBAD”, Eight TESLA Workshop: Nanoscience and Biomedicine with Ion Beams (April 18-20 2005, Belgrade, Serbia), pp. 38
  14. Kakaš, D., Novakov, T., Škorić, B., Rakita, M. 2005. “Modification of different steel surface layers by krypton ion implantation”, Eight TESLA Workshop: Nanoscience and Biomedicine with Ion Beams (April 18-20 2005, Belgrade, Serbia), pp. 37
  15. Škorić, B., Kakaš, D., Rakita, M. 2004. “Microstructural and Tribological Characterization of Duplex Coatings with Additional Ion Bombardment”, 14th Congress of International Federation for Heat Treatment and Surface Engineering, (October 26-28, 2004, Shanghai, China), pp. 1229
  16. Kakaš, D., Škorić, B., Rakita, M. “Influence of Additional Ion Bombardment by Nitrogen on Characteristics of Duplex Coatings”, 10th Joint Vacuum Conference, Portorož, Slovenia (September 28-October 2, 2004), pp. 47
  17. Škorić, B., Kakaš, D., Rakita, M. 2003. “Influence of Ion Implantation on Wear Behavior of Duplex Coatings”, 8th International Tribology Conference (October 8-10, 2003, Belgrade, Serbia), pp. 121
  18. Škorić, B., Kakaš, D., Bibić, N., Rakita, M. “Microstructural Studies of TiN Coatings Prepared by PVD and IBAD”, 22th European Conference on Surface Science (September 7-12, Prague, Czech Republic)
  19. Kakaš, D., Škorić, B., Rakita, M. “Tribological Behavior of Duplex Coating Improved by Ion Implantation”, 8th European Vacuum Congress (June 23-26, 2003, Berlin, Germany), pp. 158
  20. Škorić, B., Kakaš, D., Rakita, M., Bibić, N., Peruško, D. 2004. “Structure, Hardness and Adhesion of TiN Coatings Deposited by PVD and IBAD on Nitrited Steels”, International Summer School on Vacuum, Electron, and Ion Technologies VEIT 2003 (September 15-19, 2003, Varna, Bulgaria)
John Sheffield
  1. Hamad, T.A., Agll, A.A., Hamad, Y.M., Bapat, S., Thomas, M., Martin, K.B., Sheffield, J.W., Study of a molten carbonate fuel cell combined heat, hydrogen and power system (2014) Energy, 75, pp. 579-588.
  2. Hamad, T.A., Agll, A.A., Hamad, Y.M., Sheffield, J.W., Solid waste as renewable source of energy: Current and future possibility in Libya (2014) Case Studies in Thermal Engineering, 14, pp. 144-152.
  3. Vaz. W., Sheffield, J.W., Preliminary Assessment of Greenhouse Gas Emissions for Atactic Polypropylene (APP) Modified Asphalt Membrane Roofs, (2014) Building and Environment, 78, pp. 95-102.
  4. Agll, A.A., Hamad, Y.M., Hamad, T.A. Sheffield, J.W., Study of energy recovery and power generation from alternative energy source, (2014) Case Studies in Thermal Engineering, 4, pp. 92-98.
  5. Hamad, Y.M., Hamad, T.A., Agll, A.A., Bapat, S.G., Bauer, C., Clum, A., Shivaprasad, N., Thomas, M., Sheffield, J., A design for hydrogen production and dispensing for northeastern United States along with its infrastructural development timeline, (2014) International Journal of Hydrogen Energy 39 (19), pp. 9943-9961.
  6. Hamad, T.A., Agll, A.A., Hamad, Y.M., Bapat, S.G., Thomas, M., Martin, K.B., Sheffield, J.W., Hydrogen production and end-uses from combined heat, hydrogen and power system by using local resources, (2014) Renewable Energy, 71, pp. 381-386.
  7. Hamad, T.A., Agll, A.A., Hamad, Y.M., Bapat, S., Thomas, M., Martin, K.B., Sheffield, J.W., Study of combined heat, hydrogen and power system based on a molten carbonate fuel cell fed by biogas produced by anaerobic digestion, (2014) Energy Conversion and Management, 81, pp. 184-191.
  8. Hamad, T.A., Agll, A.A., Hamad, Y.M., Bapat, S., Thomas, M., Martin, K.B., Sheffield, J.W., Hydrogen recovery, cleaning, compression, storage, dispensing, distribution system and End-Uses on the university campus from combined heat, hydrogen and power system, (2014) International Journal of Hydrogen Energy, 39 (2), pp. 647-653.
  9. Sheffield, J. W., Martin, K. B., Folkson, R. (2014). Electricity and hydrogen as energy vectors for transportation vehicles. In Folkson, R (Ed.), Alternative Fuels and Advanced Vechicle Technologies for Improved Environmental Performance (pp. 117-137). Woodhead Publishing Limited.

  10. Hamad, T.A., Agll, A.A., Hamad, Y.M., Bapat, S., Thomas, M., Martin, K.B., Sheffield, J.W., Study of a molten carbonate fuel cell combined heat, hydrogen and power system: End-use application, (2013) Case Studies in Thermal Engineering, 1 (1), pp. 45-50.
  11. Agll, A.A.A., Hamad, Y.M., Hamad, T.A., Thomas, M., Bapat, S., Martin, K.B., Sheffield, J.W., Study of a molten carbonate fuel cell combined heat, hydrogen and power system: Energy analysis, (2013) Applied Thermal Engineering, 59 (1-2), pp. 634-638.
  12. Hamad, Y.M., Hamad, T.M., Agll, A.A., Martin, K.B., Thomas, M., Bapat, S.G., Sheffield, J.W., Molten carbonate fuel cell combined heat, hydrogen and power systems: feedstock analysis, (2013) Energy Science and Technology, Vol. 6 (2), pp. 31-35.
  13. Mohan, V., Shah, A., Sheffield, J.W., Martin, K.B., Design of a hydrogen community, (2012) International Journal of Hydrogen Energy, 37 (2), pp. 1214-1219.
  14. Shah, A., Mohan, V., Sheffield, J.W., Martin, K.B., Solar powered residential hydrogen fueling station, (2011) International Journal of Hydrogen Energy, 36 (20), pp. 13132-13137.
  15. Cottrell, C.A., Grasman, S.E., Thomas, M., Martin, K.B., Sheffield, J.W., Strategies for stationary and portable fuel cell markets, (2011) International Journal of Hydrogen Energy, 36 (13), pp. 7969-7975.
  16. Thomas, M., Martin, K.B., Grasman, S.E., Sheffield, J.W., Arauco, E.A.A., Design layout of hydrogen research and development garage, (2011) International Journal of Hydrogen Energy, 36 (13), pp. 8017-8022.
  17. Sheffield, J.W., Koylu, U.O., A rural hydrogen transportation test bed, (2009) International Journal of Hydrogen Energy, 34 (14), pp. 6000-6004.
  18. Finney, D.L., Holcomb, F.H., Sheffield, J.W., Tupper, S.H., Hydrogen-fueled buses for DOD, (2008) Military Engineer, 100 (654), pp. 67-68.
  19. Sheffield, J.W., Energy security through hydrogen, (2007) NATO Security through Science Series C: Environmental Security, pp. 1-8. Springer (ISBN 978-1-4020-6441-8).
  20. Sheffield, J. W., Sheffield, C. (2007). In Sheffield, J.W., Sheffield, C. (Ed.), Assessment of hydrogen energy for sustainable development. Springer (ISBN 1871-4668).

  21. Sheffield, J. W., Energy Convention Groningen 2005, "UNIDO-ICHET Pilot Projects," Energy Academy Europe, Groningen, The Netherlands. (October 27, 2005).

  22. Sheffield, J. W., 2nd National Conference for Hydrogen Technologies, "UNIDO-ICHET Pilot Projects," The Centre for Research & Technology, Hellas, Thessaloniki, Greece. (October 20, 2005).

  23. Sheffield, J. W., 1st International Conference on Hydrogen Safety, "Assessment of Integrated Hydrogen Energy Systems in UNIDO-ICHET Pilot Projects," European Commission, Pisa, Italy. (September 9, 2005).

  24. Sheffield, J. W., 1st World Congress of Young Scientists on Hydrogen, "UNIDO-ICHET Programs for Hydrogen Applications and Energy Systems," Italian National Agency for New Technologies, Energy and Sustainable Economic Development, Torino, Italy. (May 19, 2005).

  25. Syed, M.T., Sherif, S.A., Veziroglu, T.N., Sheffield, J.W., Second law analysis of hydrogen liquefiers operating on the modified Collins cycle, (2001) International Journal of Energy Research, 25 (11), pp. 961-978.
  26. Sheffield, J. W., 23rd World Energy Engineering/Environmental Technology Expo/Plant & Facilities Expo, "Enhancing Energy Assessments Through Partnerships," Association of Energy Engineers, Atlanta, GA. (October 26, 2000).

  27. Romero, H., Ambriz, J.J., Ortiz, J.N., Sheffield, J.W., Joint Mexico/USA energy audits: a case study, (1999) Energy Engineering: Journal of the Association of Energy Engineering, 96 (6), pp. 17-28.
  28. Sheffield, J. W., 21th World Energy Engineering/Environmental Technology Expo/Plant & Facilities Expo, "Joint Mexico/USA Energy Audits: A Case Study," Association of Energy Engineers, Atlanta, GA. (November 5, 1998).

  29. Syed, M.T., Sherif, S.A., Vezirog̃lu, T.N., Sheffield, J.W., An economic analysis of three hydrogen liquefaction systems, (1998) International Journal of Hydrogen Energy, 23 (7), pp. 565-576.
  30. Sheffield, J. W., XVIII Seminario Nacional Sobre el Uso Racional de la Energia y Exposicion de Equipos y Servicios (ATPAE), "Energy Conservation in Manufacturing Plants of Textile Products Made from Fabrics: A Case Study," El Fideicomiso para el Ahorro de Energía Eléctrica (FIDE), Mexico DF, Mexico. (September 25, 1997).

  31. Sheffield, J. W., XVII Seminario Nacional Sobre el Uso Racional de la Energia y Exposicion de Equipos y Servicios (ATPAE), "Industrial Energy Audits," El Fideicomiso para el Ahorro de Energía Eléctrica (FIDE), Mexico D.F., Mexico. (November 28, 1996).

  32. Sheffield, J. W., 19th World Energy Engineering Congress, "A Strategic Management Approach for Energy and Waste Minimization Assessment Centers," Association of Energy Engineers, Atlanta, GA. (November 7, 1996).

  33. Sheffield, J. W., 2nd Annual Congress of the Mexican Association for Energy Economics: “Energy Transitions in Mexico, Central America and South America”, "Energy in Latin America: Present and Future," Mexican Association for Energy Economics, Mexico D.F., Mexico. (September 24, 1996).

  34. Sheffield, J. W., 1996 Annual Conference and Exposition of the American Society for Engineering Education, "Electric Demand Reduction for Industrial Plants," American Society for Engineering Education, Washington, D.C. (June 26, 1996).

  35. Chung, K.C., Benson, H.K., Sheffield, J.W., Thermal contact conductance of ceramic substrate junctions, (1995) Journal of Heat Transfer, 117 (2), pp. 508-510.
  36. Chung, Kee-Chiang, Sheffield, John W., Enhancement of thermal contact conductance of coated junctions, (1995) Journal of thermophysics and heat transfer, 9 (2), pp. 329-334.
  37. Zhang, L., Sherif, S.A., Veziroǧlu, T.N., Sheffield, J.W., Performance analysis of reciprocating magnetic liquefiers, (1994) International Journal of Hydrogen Energy, 19 (12), pp. 945-956.
  38. Gürsu, S., Sheriff, S.A., Vezirocǧlu, T.N., Sheffield, J.W., Review of slush hydrogen production and utilization technologies, (1994) International Journal of Hydrogen Energy, 19 (6), pp. 491-496.
  39. Zhang, L., Sherif, S.A., Veziroĝlu, T.N., Sheffield, J.W., On exergy losses in AMR hydrogen liquefiers, (1994) International Journal of Hydrogen Energy, 19 (5), pp. 447-452.
  40. Sheffield, J. W., 17th World Energy Engineering Congress, "In Transition from Energy Audits to Industrial Assessements," Association of Energy Engineers, Atlanta, GA. (December 8, 1994).

  41. Gursu, S., Sherif, S.A., Veziroglu, T.N., Sheffield, J.W., Analysis and optimization of thermal stratification and self pressurization effects in liquid hydrogen storage systems - Part 1: model development, (1993) Journal of Energy Resources Technology, Transactions of the ASME, 115 (3), pp. 221-227.
  42. Gursu, S., Sherif, S.A., Veziroglu, T.N., Sheffield, J.W., Analysis and optimization of thermal stratification and self-pressurization effects in liquid hydrogen storage systems - part 2: model results and conclusions, (1993) Journal of Energy Resources Technology, Transactions of the ASME, 115 (3), pp. 228-231.
  43. Zhang, L., Sherif, S.A., Veziroglu, T.N., Sheffield, J.W., Second law analysis of active magnetic regenerative hydrogen liquefiers, (1993) Cryogenics, 33 (7), pp. 667-674.
  44. Chung, K.C., Sheffield, J.W., Sauer Jr., H.J., O'Keefe, T.J., Williams, A., Thermal contact conductance of a phase-mixed coating layer by transitional buffering interface, (1993) Journal of Thermophysics and Heat Transfer, 7 (2), pp. 326-333.
  45. Chung, K.C., Sheffield, J.W., Sauer Jr., H.J., Thermal constriction resistance of phase-mixed metallic coatings, (1992) Journal of Heat Transfer, 114 (4), pp. 811-818.
  46. Chung, K. C., Sheffield, J. W., Sauer, H. J. (1992). Effects of Metallic Coated Surfaces on Thermal Contact Conductance:  An Experimental Study. In T. N. Veziroglu (Ed.), Heat and Mass Transfer: An Era of Change (vol. 1). Nova Science Publishers, Inc.

  47. Sheffield, J. W., NSF/DITAC Collaborative Workshop - Thermal Conductance Enhancement in Microelectronics, "Overview of Microelectronics and Thermal Contact Conductance," NSF/DITAC, Melbourne, Australia. (May 5, 1992).

  48. Sheffield, J. W., NSF/DITAC Collaborative Workshop - Thermal Conductance Enhancement in Microelectronics, "Thermal Contact Conductance of Metal to Metal and Metal to Ceramic Joints within Microelectronic Packages," NSF/DITAC, Melbourne, Australia. (May 5, 1992).

  49. Zhang, L., Veziroglu, T.N., Sherif, S.A., Sheffield, J.W., Performance analysis of reciprocating magnetic liquefiers, (1991) American Society of Mechanical Engineers (Paper), pp. 1-10.
  50. Gursu, S., Veziroglu, T.N., Sherif, S.A., Sheffield, J.W., Analysis and optimization of thermal stratification and self-pressurization effects in liquid hydrogen storage systems, (1991) American Society of Mechanical Engineers (Paper), pp. 1-11.
  51. Chung, K.C., Sheffield, J.W., Sauer Jr., H.J., Thermal constriction resistance of phase-mixed metallic coatings, (1991) American Society of Mechanical Engineers, Heat Transfer Division, (Publication) HTD, 173, pp. 27-33.
  52. Sheffield, J. W., International Symposium on Energy, Environment and Economics, "Energy Conservation Opportunities for Industrial Manufacturing Facilities," Baku, Azerbaijan. (August 20, 1991).

  53. Sheffield, J. W., Wen, C., Leland, J. E. (1990). Melting heat transfer inside a cylinder. In T. N. Veziroglu (Ed.), Multiphase Transport and Particulate Phenomena (vol. 1, pp. 447-459). Hemisphere Publ. Corp.

  54. Petkov, T., Veziroǧlu, T.N., Sheffield, J.W., An outlook of hydrogen as an automotive fuel, (1989) International Journal of Hydrogen Energy, 14 (7), pp. 449-474.
  55. Wen, C., Sheffield, J.W., O'Dell, M.P., Leland, J.E., Analytical and experimental investigation of melting heat transfer, (1989) Journal of Thermophysics and Heat Transfer, 3 (3), pp. 330-339.
  56. Sheffield, J.W., Wood, R.A., Sauer Jr., H.J., Experimental investigation of thermal conductance of finned tube contacts, (1989) Experimental Thermal and Fluid Science, 2 (1), pp. 107-121.
  57. Sauer, H. J., Sheffield, J. W. (1988). A correlation for the contact conductance in finned tube heat exchanger. In D. W. Yarbrough (Ed.), Thermal Conductivity 19:  Proceedings of the Nineteenth International Thermal Conductivity Conference. New York, New York: Plenum Publishing Corporation.

  58. Sheffield, J. W., Sauer, H. J., Wood, R. A. (1987). An experimental method for measuring the thermal contact resistance of plate finned tube heat exchangers. ASHRAE Transactions, 93, pp. 776-785.

  59. Wood, R. A., Sheffield, J. W., Sauer, H. J. (1987). Thermal contact conductance of finned tubes:  a generalized correlation. ASHRAE Transactions, 93, pp. 786-797.

  60. Wood, R. A., Sheffield, J. W., Sauer, H. J. (1987). Thermal contact conductance of finned tubes:  the effect of various parameters. ASHRAE Transactions, 93, pp. 798-810.

  61. Sheffield, J.W., Stafford, B.D., Sauer Jr., H.J., Finned tube contact conductance: empirical correlation of thermal conductance, (1985) ASHRAE Transactions, 91 (pt 1A), pp. 442-452.
  62. Sheffield, J. W., Veziroglu, T. N. (1987). Hydrogen-hydride systems and applications. Proceedings of the 1986 International Congress on Renewable Energy Sources (vol. 1, pp. 786-841). Madrid, Spain: Consejo Superior de Investigaciones Cientificas.

  63. Ernest, T. L., Sheffield, J. W., Sauer, H. J. (1985). Finned tube contact conductance: characterizing the integrity of the mechanical bond, ASHRAE Transaction 91, pp. 85-99.
  64. Fox, Barry R., Brewster, Larry T., Kher, Raghav P., Sheffield, John W., Van Griethuysen, Valerie J., Design assistant for spacecraft thermal management systems. (1985) Proceedings of the Intersociety Energy Conversion Engineering Conference, pp. 425-429.
  65. Sheffield, John W., Kher, Raghav P., Van Griethuysen, Valerie J., Phase change materials for spacecraft thermal management. (1984) Proceedings of the Intersociety Energy Conversion Engineering Conference, pp. 152-157.
  66. Sheffield, J.W., Van Griethuysen, V.J., Weight Characteristics of Future Spacecraft Thermal Management Systems. (1984) AIAA Paper, 6 p.
  67. Sheffield, J.W., Veziroglu, T.N., Fundamentals and Applications of Hydrides, International Symposium-Workshop on Renewable Energy Sources.; Pakistan Council of Scientific & Industrial Research,Lahore, Pa.(1983) pp. 319-343.
  68. El-Bassuoni, A.-M.A., Sheffield, J.W., Veziroglu, T.N., Hydrogen and fresh water production from sea water, (1982) International Journal of Hydrogen Energy, 7 (12), pp. 919-923.
  69. El-Bassuoni, Abdel Monem A., Sheffield, John W., Veziroglu, T.Nejat, Thermoelectrochemical hydrogen production using sodium chloride. (1982) Alternative Energy Sources: Proceedings of the Miami International Congress on Energy and the Environment, 8, pp. 3389-3403.
  70. Chen, D. Z., Gurkan, I., Sheffield, J. W., Veziroglu, T. N. (1982). Effective Cost of Fuels: Comparison of Hydrogen with Fossil Fuels. In T.N. Veziroglu, W.D. Van Vorst, J.H. Kelley (Ed.), Hydrogen Energy Progress - IV (vol. 4, pp. 1523-1538). Pergamon Press.

  71. Sheffield, J. W. (1982). Enhanced Heat Conduction During Solidification of Thermal Energy Storage Systems. In T. N. Veziroglu (Ed.), Alternative Energy Sources IV (vol. 1, pp. 357-365). Ann Arbor Science.

  72. Mentes, A., Veziroglu, T.N., Samudrala, R., Sheffield, J.W., Williams, A., Effect of Interface Gases on Contact Conductance. (1981) AIAA Paper, 7 p.
  73. Sheffield, J.W., Veziroglu, T.N., Williams, A., Thermal Contact Conductance of Coated Multilayered Sheets. (1980) AIAA Paper, 7 p.
  74. Sheffield, J.W. On the accuracy of the zeroth order solution of heat conduction equation for a slab with time dependent heat transfer coefficient at the boundaries, (1975) Letter of Heat and Mass Transfer, 2 (1), pp.49-50.
Raji Sundararajan

PUBLICATIONS
Articles in refereed journals (*indicates lead author(s) and + represents students)


1) J. Shi+ (and R. Sundararajan) (2014). A new strategy of drug delivery-Electric field distribution in brain tumor due to electroporation. Journal of Purdue Undergraduate Research.
2)    Campana L., et al. (2012). Superficial disease control in melanoma patients treated with electrochemotherapy in a palliative setting. British J of Surgery.
3) Sundararajan, R.*, Xiao, F. +, Salameh, T.+, Reece, L.M., Campana, L.G.*, & Camarillo, I.G. (2012). Effective proliferation control of human cancer cells using electrical pulses. IEEE Transactions on Dielectrics and Electrical Insulation.
4) Varadarajan, G.*, Udayakumar, K., & Sundararajan, R*. (2011). Electric field analysis of breast tumor cells. International Journal of Breast Cancer. Vol. 2011 (2011), Article ID 235926.
5) Sankaranarayanan, K.*, Ramachandran, R.*, Kumar. R.+, Muralitharen, S.+, Usman, S.M.+, Sriram Kumar, M.+, Madan Kumar, V. +, Vignesh, S. +, Malini, V., Cherian, K.M., Madhivanan, S., Sankaranarayanan, K., Natarajan, A., & Sundararajan, R.* (2011). Effective Electro-Chemo-Therapy for Proliferation Control of Adult Human Mesenchymal Stem Cells. Journal of Electrostatics. 69, 267-274 (invited).
6) Sundararajan, R. (2009). Nanosecond Electroporation: Another look. Journal Molecular Biotechnology. 41, 69-82 (invited, 126 citations, 52 views).
7) Capaccio, C.+, Stoykov, N.*, Sundararajan, R.,* & Dean, D.A.* (2009). Quantifying induced electric field strength during gene transfer to the intact rat vasculature. Journal of Electrostatics. 67, 652-662 (1 citation).
8) Camarillo, I.G.*, Nichols, M.*, Zheng, M.+, Sonnenburg, D.+, & Sundararajan, R.* (2008). Electro-endocrine combination Therapy for aggressive breast tumors. Journal of Electrostatic. 66, 2008, 99-106 (invited, 5 citations).
9) Dean, D.A.*, Ramanathan, T., Machado D.*, & Sundararajan, R.* (2008).
Electrical impedance spectroscopy study of biological tissues. Journal of Electrostatics. 66, 165-177.
10) Sundararajan, R. (2008). Multistress aging of 28kV silicone rubber insulators under west and east coast conditions of USA. The Journal of Central Power Research Institute (CPRI). Vol. 4, No. 2, 125-134.
11) Parmentier, M.J.* & Sundararajan, R.* (2008). A multidisciplinary masters program in global technology and development. The Technology Interface Journal (online)/fall 2008. Vol. 9. No. 1.
12) Sundararajan, R.*, Olave, C.+, Romero, E.+, & Trepanier, B. (2007). Modified IEC 5000h multistress aging of 28kV thermoplastic elastomeric insulators. IEEE Transactions on Power Delivery. 22 (2), 1006-1012 (4 citations).
13) Sundararajan, R.*, Mohammed, A.+, Soundarajan, E.+, & Graves, J.+ (2006). Multistress accelerated aging of polymer housed surge arresters under simulated coastal Florida conditions. IEEE Transactions on Dielectrics and Electrical Insulation (DEI). 13 (1), 211-226 (17 citations).
14) Ellappan, P., + & Sundararajan, R.* (2005). A Simulation study of the electrical model of biological cells. Journal of Electrostatics. 63, 297-307 (invited, 9 citations).
15) Sundararajan, R.*, Nagabhushana, G.R.*, Kishore, N.K.*, & Soundarajan, E. + (2005). Influence of peaking capacitors in reducing rise times of high voltage nanosecond pulses. IEEE Transactions on Industrial Applications. 41 (3), 690-97 (3 citations).
16) Farzaneh, M.*, et al.*, including Sundararajan, R. (2005). Selection of station insulators with response to ice and snow-Part I: Technical context and environmental exposure. A position paper. IEEE Transactions on Power Delivery. 20 (1), 264-270.
17) Farzaneh, M.*, et al., including Sundararajan, R. (2005). Selection of station insulators with response to ice and snow-Part II: Methods of  selection and options for mitigation. A position paper. IEEE Transactions on Power Delivery. 20 (1), 264-270.
18)  Sundararajan, R.*, & Gorur, R. (2005). When birds and power lines collide. Transmission & Distribution World Magazine.
19) Chaney, A.+, & Sundararajan, R.* (2004). Simple MOSFET-based high-voltage nanosecond pulse generator. IEEE Transactions on Plasma Science. 32 (5), 1919-24 (11 citations).
20) Sundararajan, R.*, Shao, J. +, Soundarajan, E. +, Gonzales, J. +, & Chaney, A. + (2004). Performance of solid state high voltage pulsers for biological applications – A preliminary study. IEEE Transactions on Plasma Science. 32 (5), 2017-25 (10 citations).
21) Sundararajan, R.*, Mohammad, A. +, Chaipanit, N. +, Karcher, T., & Liu, Z. (2004). In service aging and degradation of 345kV EPDM transmission line insulators in a coastal environment. IEEE Transactions on Dielectrics and Electrical Insulation. 11 (2), 348-361 (34 citations).
22) Sundararajan, R.*, et al. (2004). Preventive measures to reduce bird-related power outages-Part I – Electrocution and collision. A position paper prepared by the IEEE Task Force on Bird-related outages. IEEE Transactions on Power Delivery. 19 (4), 1843-47.
23) Sundararajan, R.*, et al. (2004). Preventive measures to reduce bird-related power outages-part II – Streamer and contamination outages. A position paper prepared by the IEEE Task Force on Bird-related outages. IEEE Transactions on  Power Delivery. 19 (4), 1848-53.
24) Farzaneh, M.*, et al. (2003). Insulator icing test methods and procedure. A Position paper prepared by the IEEE Task Force on Insulator Icing Test Methods. IEEE Transactions on Power Delivery. 8 (4), 1503-1515.
25) Felix, A. +, Karady, G.G.*, & Sundararajan, R.* (2002). Linear stochastic analysis of polluted insulator leakage current. IEEE Transactions on Power Delivery. 17 (4), 1063-69 (29 citations).
26) Nowlin, R.*, Soman, S.+, & Sundararajan, R.* (2002). Synthesis modeling techniques in VHDL. Journal of Engineering Technology. pp. 44-50.
27) Felix, A. +, Karady, G.G.*, & Sundararajan, R.* (2001). Level crossing analysis of leakage current of polluted insulators. IEEE Power Engineering Review.
28) Nowlin, R.*, & Sundararajan, R.* (1999). A forward looking electronics and computer engineering technology program. IEEE Transactions on Education. 42 (2) (4 citations).
29) Nowlin, R.*, & Sundararajan, R.* (1998). A VHDL course for electronics engineering technology. Computers in Education Journal. 17-20 (invited).
30) Sundararajan, R.*, & Gorur, R.S. (1996). Role of non-soluble contaminants on the flashover voltage of porcelain insulators. IEEE  Transactions on Dielectrics and Electrical Insulation. 3 (1), 113-118.
31) Sundararajan, R.*, Sadureddy, N.R. +, & Gorur, R.S. (1995). Computer aided design of porcelain insulators under polluted conditions. IEEE Transactions on Dielectrics and Electrical Insulation. 2 (1), 121-127.
32) Sundararajan, R.*, & Gorur, R. S*. (1994). Effect of insulator profiles on dc flashover voltages under polluted conditions - A Study using a Dynamic Arc Model. IEEE Transactions on Dielectrics and Electrical Insulation. 1 (1), 124-132 (5 citations).
33) Sundararajan, R.*, & Gorur, R.S.* (1993). Dynamic Arc Modeling of Pollution Flashover of Insulators under DC Voltages. IEEE Transactions on Electrical Insulation. 28 (2), 209-18.

HighLights:


Top 20 Articles, in the Domain of Article 18821065, Since its Publication (2009)
8.  Nanosecond electroporation: another look.
Sundararajan R.
Mol Biotechnol; 2009 Jan;41(1):69-82.
Campana, LG and Sundararajan, R. Featured Interview. In Zheng E, Zhong NQ. Electrochemotherapy: an active treatment for chest wall metastases from breast cancer. Gland Surg 2012;1(3):173-175. DOI: 10.3978/j.issn.2227.

Sundararajan, R. (2014). Nanocurcumin-based electrochemotherapy for pancreatic cancer: the answer the world is looking for. Editorial. J of Nanomedicine & Biotherapeutic Discovery-June 09 2014 (Article usage: Total views-7686, HTML page views-6907, PDF downloads-779).

Conference or symposium proceedings ((* indicates lead author(s) and + represents students)


Research-related

1) Sarathi, R., Rayala, R., Vignesh, C., Praveen Kumar, and Sundararajan, R. (2015). Efficient and economical electrical therapy for pancreatic cancers. Annual Report Conference on Electrical Insulation and Dielectric Phenomena (CEIDP), Michigan, Oct 2015.
2) Raman, V., Camarillo, C., Sundararajan, R. (2015). Irreversible electroporation of aggressive triple negative breast cancer cells. CEIDP 2015.
3) Vadlamani, A., Zhuang, J., Sundararajan, R., Kolb. J., and Garner A. (2015). Temperature effects on Dielectric properties of biological cells. CEIDP 2015.
4) Guo, Y., Jiang, X., and Sundararajan, R. (2015). A dynamic model of dc arc discharge on polluted porcelain insulators at high altitudes. CEIDP 2015.
5) Marathe, M., Bhatt, N., and Sundararajan, R. (2014). A novel wireless vein finder. International Conference on Circuits, Control, Communication, and Computing (I4C-2014), Nov 2014, Bangalore, India.
6) Sarathi, R., Rayala, S., Kumar, P., and Sundararajan, R. (2014). Effective pancreatic cancer treatment using electrical pulses: an in vitro model study. Annual Report Conference on Electrical Insulation and Dielectric Phenomena (CEIDP), Des Moines, IA.
7) Sampath, B., Sivakumar, V., Sankaranarayanan, K., Camarillo, I.G., Lin, W., Natarajan, A., and Sundararajan, R. (2014). Breast cancer treatment using curcumin, the natural dielectric. CEIDP, Des Moines, IA.
8) Venuturumilli, S. and Sundararajan, R. (2014). Electric field distribution in brain tumors. CEIDP, Des Moines, IA.
9) Lin, W., Cooper, C., Camarillo, I.G., Reece, L.M., Clah, L., Natarajan, A., Campana, L.G., and Sundararajan, R. (2014). The effectiveness of electroporation-based nanocurcumin and curcumin treatments on human breast cancer cells. Proc. ESA Annual Meeting on Electrostatics, Univ. of Notre Dame, IN.
10) Venuturumilli, S., Sji, J., and Sundararajan, R. (2014). Electric field distribution study of brain tumors for various electrode geometries. Proc. ESA Annual Meeting on Electrostatics, Univ. of Notre Dame, IN.
11) Gowrishankar, S., Gowrisree, V., and Sundararajan, R. (2014). Enhancement of paddy germination and growth under high electric field. International Conference on Power, Control and Embedded Systems (ICPCES-2014), Anna University, Guindy, Chennai, India.
12) Sundararajan, R., Xiao, F., Salameh, T., Otto, K., & Camarillo, I.G. (2012). The dielectric properties of electroporated human breast cancer cells. International Conference on Properties and Applications of Dielectric Materials (ICPADM). CPRI, Bangalore, India.
13) Sada Sivam, P., et al. (2012). Electrical field analysis of pentagonal needle array electrode for electrochemotherapy applications. Annual Report Conference on Electrical Insulation and Dielectric Phenomena (CEIDP). Montreal, Canada.
14) Varadarajan, G., Kumaran, V., & Sundararajan, R. (2012). Electric field distribution of malignant breast tissue under needle electrode configuration. CEIDP. Montreal, Canada.
15) Sathiyanathan, K.V., Varadarajan, G., Kothandaraman, U. & Sundararajan, R. (2012). Microbial growth reduction in tomato juice using electrical pulses. CEIDP. Montreal, Canada.
16) Varadarajan, G., Ramakrishnan, R., & Sundararajan, R. (2012). Effective water treatment using pulsed electric field technique. Electrostatics Society of America (ESA) Annual Conference. Cambridge, Canada.
17) Varadarajan, G., Kalimuthu, K., & Sundararajan, R. (2012). High intensity electric field assisted germination of paddy. ESA Annual Conference. Cambridge, Canada.
18) Kung, W. & Sundararajan, R. (2012). Electrochemotherapy for brain tumors: Electric field distribution study. ESA Annual Conference. Cambridge, Canada.
19) McMullen, K.J., Sundararajan, R., & Fisher, T.S. (2012). Thermionic electron emission from petal-like carbon nanosheets grown on carbon fibers. International Conference on Renewable Energy Utilization, Kovai, India.
20) Sundararajan, R.*, Salameh, T.+, Camarillo, I.G., and Campana, L. (2011). Effective use of electrical pulses on cancer cells to control proliferation. 14th International Symposium on Electrets (ISE14). Montpellier, France (invited).
21) Sundararajan, R.*, Ramachandran, R., and Sankaranarayanan, K. (2011). Efficient, electrically-enhanced proliferation control of Adult Human Mesenchymal Stem Cells. 14th International Symposium on Electrets. Montpellier, France (invited).
22) Heish, M.+, Salameh, T.+, Camarillo, G. I.*, & Sundararajan, R.* (2011). Irreversible electroporation of various cancer cells. Electrostatics Society of America (ESA) Annual Conference. Ohio, USA.
23) Sundararajan, R.*, Rajendran, R. +, Shahid, S. +, Kanagaraj, S. +, Radhakrishman, S., Kathirvel, P., Sunderesan, V., Udayakumar, V., Ramachandran, R., Natarajan, A., & Sankaranarayanan, K.* (2011). Effect of irreversible Electroporation on Antiproliferation control of Fibroblasts. ESA Annual Conference. Ohio, USA.
24) Agoramurthy, P. +, & Sundararajan, R.* (2011). 3D Analysis of electric field distribution of large tumors using multiple needle electrodes. Proceedings of the ESA Annual Conference. Ohio, USA.
25) Agoramurthy, P. +, Campana, L.,* & Sundararajan, R.* (2011). Finite element modeling and analysis of human breast tissue for electrochemotherapy. Annual Report Conference on Electrical Insulation and Dielectric Phenomena (CEIDP). Cancun, Mexico.
26) Bommakanti, S. +, Campana, L.*, & Sundararajan, R.* (2011). A Simulation analysis of the multi electrode needles on electroporation efficiency of a cancer tissue. Annual Report CEIDP. Cancun, Mexico.
27) Sundararajan, R.*, et al. (2011). Irreversible electroporation of cancer cells. Annual Report CEIDP. Cancun, Mexico.
28) Sundararajan, R.*, Xiao, F. +, Salameh, T. +, Camarillo, I.G., Leary, J.F., Reece, L.M., Madhivanan, S., & Natarajan, A. (2010). Nanosecond, Low Voltage Electro-Endocrine-Therapy for Breast Cancer Treatment. Annual Report CEIDP. West Lafayette, IN, USA.
29) Sankaranarayanan, K.*, et al. (2010). The lethal pulse-viability of cancerous cell lines as a function of energy delivered. Annual Report CEIDP. West Lafayette, IN, USA.
30) Gowri Sree, V.*, Nandhini, N.A. +, Udayakumar, K., & Sundararajan, R.* (2010). Electric field analysis in tumor tissues. Annual Report CEIDP. West Lafayette, IN, USA.
31) Agoramoorthy, P. +, & Sundararajan, R.* (2010). Electric Field Distribution of Human Breast Tissue. Annual Report CEIDP. West Lafayette, IN, USA.
32) Sankaranarayana, K.*, et al. (2010). Electro-molecular therapy using adult mesenchymal stem cells. ESA Annual Conference. Charlotte, NC, USA.
33) Dykstra, C. +, Salameh, T. +, Camarillo, I.G., Xiao, F., & Sundararajan, R.* (2010). Enhanced Doxorubicin uptake in malignant breast cells using electrical pulses. ESA Annual Conference. Charlotte, NC, USA.
34) Sundararajan, R. (2010). Long term acid rain multistress performance of thermoplastic and thermoset polymeric insulators. International Conference on Information and industrial Systems (ICIIS). NITK Suratkal, India (invited).
35) Amin, M.*, & Sundararajan, R.* (2010). Performance of silicone rubber insulators under acid rain + multistress conditions. International conference on High Voltage Eng (ICHVE). New Orleans, USA (invited).
36) Sundararajan, R.*, et al. (2009). Efficient and Economical Electro-Drug Delivery. IEEE International Conference on Science & Technology for Humanity. Toronto, Canada.
37) Xiao, F.+, Salameh, T.+, Camarillo, I.G., Dykstra, C.+, Lenarduzzi N.+, Reece, L.M., Leary, J.F., Natarajan, A., & Sundararajan, R.* (2009). Electrically-enhanced chemodrug delivery to human breast cancer cell. ESA Annual Conference. Boston, USA (4 citations).
38) Gowri Sree, V.*, Udayakumar, K., & Sundararajan, R.* (2009). Pulsed-electrical field-mediated inactivation of tumor cells, ESA Annual Conference. Boston, USA.
39) Xiao, F+, & Sundararajan, R.* (2009). A simulation study of the electrode profile on electroporation efficacy. ESA Annual Conference. Boston, USA.
40) Kumar, R.+, Muralitharen, S.+, Usman, M.+, Ramachandran, R.*, Sundararajan, R.*, Madhivanan, S., Cherian, K.M., Begam, S., Guhathakurta. S., Sankaranarayanan, K.* (2009). Electrically-enhanced proliferation control in adult human mesenchymal stem cells. Annual Report CEIDP, VA, USA (1 citation).
41) Xiao, F.+, Salameh, T.+, Camarillo, I.G., Otto, K., Natarajan, A., & Sundararajan, R.* (2009). Impedance studies of electroporated human breast cancer cell. Annual Report CEIDP, Biodielectrics Session. VA, USA.
42) Sundararajan, R.* Chapman, R.+, & Nowlin, R. (2009). Realistic multistress long term aging of 28kV polymeric insulators. International Conference on Power Systems, IIT Kharagpur.
43) Zheng, M.+, Salameh, T.+, Lenarduzzi, N.+, Camarillo, I.G.*, & Sundararajan, R.* (2008). Enhanced uptake in normal and malignant cell lines using electrical pulses. ESA Annual Conference. Minneapolis, USA (7 citations).
44) Harper, J.+, Campbell, D.+, & Sundararajan, R.* (2008). A compact high voltage nanosecond pulser. ESA Annual Conference, Minneapolis, USA (1 citation).
Cited by the Air Force, in its call for proposal,
AF093-029TITLE: Short Pulse Radio Frequency (RF) Field Measurement System

45) Sundararajan, R.*, Campbell, D.+, Harper, J.+, Natham, V.+, Xiao, F.+, & Otto, K. (2008). Characterization of fruit juices treated with electric pulses. Annual Report CEIDP. Quebec City, Canada (1 citation).
46) Sundararajan, R.*, Godinez, V. +, & Amin, M.* (2008). Performance of thermoplastic elastomeric and thermoset insulators under accelerated acid rain multistress conditions. National Power Systems Conference. India.
47) Xiaoxia, G.+, Guangning, W.*, Bo, G., Liren, Z.+, Kai, Z.+, & Sundararajan, R. (2008). Insulation degradation of electric motor windings under high frequency square wave pulses. Proceedings of the IEEE EMECW. FL, USA.
48) Amin, S.+, Amin, M.*, & Sundararajan, R.* (2008). Comparison of multistress aging of thermoplastic elastomeric and silicone rubber insulators under a Pakistani environment. Annual Report CEIDP. Quebec, Canada.
49) Sonnenburg, D.+, Nichols, M.*, Zheng, M.+, Camarillo, I.G.*, & Sundararajan, R.* (2007). Electro-endocrine therapy for aggressive breast cancer tumors caused by obesity. ESA Annual Conference. IN, USA.
50) Sundararajan, R.*, Gutierrez, A.+, & Harding, G. (2007). Electrical-pulse mediated sterilization of fruit juices. ESA Annual Conference. IN, USA.
51) Godeinez, V.+, & Sundararajan, R.* (2007). Low voltage pulse-mediated sterilization of liquid food, Annual Report CEIDP, Montreal, Canada.
52) Sundararajan, R. (2007). Performance of Polymeric Arresters and Insulators under Multistress Conditions. International Conference on Polymeric Materials in Power Engineering. Bangalore, India (invited).
53)  Sundararajan, R.*, Olave, C.+, Romero, E.+, & Kannan, A.M.* (2007). Impedance Analysis of Long Term aged Thermoplastic Elastomeric Insulators. CEIDP. Montreal, Canada.
54) Dean, D.A.*, Machado, D.*, Ramanathan, T., Molina, I., & Sundararajan, R.* (2006). Electrical properties of Biological Tissues – An Impedance Spectroscopy Study, Annual Report CEIDP. Kansas City, USA.
55) Dean, D.A.*, Ramanathan, T., Machado, D., & Sundararajan, R.* (2006). Electrical Impedance Spectroscopy study of Rat Lung and other Tissues In vivo. ESA Annual Conference. University of California, Berkeley, USA.
56) Dean, D.A.*, Machado, D., & Sundararajan, R.* (2006). Electrical properties of biological tissues due to Electroporation - In vivo. ESA Annual Conference. University of California, Berkeley, USA.
57) Sundararajan, R.*, Kannan, A.M., Romero, E.+, Godinez, V.+, & Molina, I. (2006). Characterization of Aging and Degradation of 28kV Polymeric Insulators using Electrical Impedance Spectroscopy. Annual Report CEIDP. Kansas City, USA (2 citations).
58) Sundararajan, R.*, Olave, C.+, Molina, I., & Kannan, A.M. (2006). Very Long Term Performance of TPE Insulators under Slightly Modified IEC 61109 Multistress Conditions. INSUCON. Birmingham, UK.
59) Curd, T.+, Vernon, B.*, Pauken, C., & Sundararajan, R.* (2005). Optimization of Electroporation Parameters for Human Ovarian Cancer Cell. ESA Annual Conference. University of Alberta, Edmonton, Canada.
60) Capaccio, C.+, Stoykov, N.*, Sundararajan, R., & Dean, D.A.* (2005). Electric Field Distribution and Nuclear Transport in Vasculature due to Electroporation: A Mathematical Modeling and Analysis. ESA Annual Conference. University of Alberta, Edmonton, Canada.
61) Capaccio, C.+, Stoykov, N., Cortes, F., Sundararajan, R.*, & Dean, D.A.* (2005). Parametric Analysis of Electrical Field Distribution of Rat Vasculature using Finite Element Time domain Technique. FEMLAB Conference 2005. Boston, USA (1 citation).
62) Mitchell, W. +, & Sundararajan, R. (2005). Electric Field Distribution in Biological Tissues for Various Electrode Configurations-A FEMLAB Study. FEMLAB Conference 2005. Boston, MA, USA.
63) Olave, C.+, Molina, I., & Sundararajan, R.* (2005). Influence of Acid Rain+Multistress Conditions on the long term performance of 28kV Polymeric Insulators. Annual Report CEIDP. Nashville, USA (1 citation).
64) Olave, C.+, Romero, E.+, Sundararajan, R.*, & Trepanier, B. (2005). 5000h Aging of 28kV TPE Insulators. IEEE PES Annual Meeting. USA.
65)  Graves, J.+, & Sundararajan, R. (2004). Electric Field Simulation of Biological Cells. Proceedings, ESA Annual Conference, Rochester. USA.
66)  Ellappan, P.+, & Sundararajan, R. (2004). Simulation Study of Electrical Modeling of Biological Cells. ESA Annual Conference, Rochester. USA.
67) Venkatanarayanan, S.+, Jackson, E.+, Olave, C.+, Brignone, G., Sundararajan, R.*, & Trepanier, B. (2004). Performance of Thermoplastic Elastomeric Insulators under IEC 5000h Multistress Conditions. Annual Report CEIDP. Colorado, USA (1 citation).
68) Soundarajan, E.+, Jackson, E.+, & Sundararajan, R.* (2004). A Realistic Multistress Aging/Ranking Test for High Voltage Outdoor Polymeric Insulators. Annual Report CEIDP. Colorado, USA.
69) Liu, Z., Sundararajan, R.*, Mohammed A.+, & Graves, J.+ (2004). SEM and FTIR Analysis of Field Aged vs. Laboratory Aged Polymeric Surge Arresters. Microscopy/Microanalysis Conference. Savannah, GA.
70) Sundararajan, R.*, Soundarajan, E.+, Shao, J.+, Gonzales, J.+, & Karady, G. (2003). Nanosecond MOSFET High Voltage Pulsers for Biological Applications – a Simulation Study. IEEE IAS/ESA Joint Meet. AR, USA.
71) Sundararajan, R.*, Nagabhushana, G.R., Kishore, N.K.*, & Soundarajan, E.+ (2003). Influence of Peaking Capacitor in Reducing Rise Times of High Voltage Nanosecond Pulses. IEEE IAS/ESA Joint Meet. AR, USA.
72) Sundararajan, R.*, Mohammed, A.+, Soundarajan, E.+, & Graves, J.+ (2003). Field and Lab Aging of EP Compound Arresters. Annual Report CEIDP. Albuquerque, NM, USA.
73) Mohammed, A.+, & Sundararajan, R. (2003). Investigation of Breakdown of an EPSB Polymeric Arrester Based on the Life Estimation using a Multiple Regression Model. Annual Report CEIDP. NM, USA.
74) Soundarajan, E.+, Jackson, E.+, King, A.+, & Sundararajan, R.* (2003). Performance of Novel High Voltage Outdoor Thermoplastic Elastomeric Insulators. Annual Report CEIDP. Albuquerque, NM, USA.
75)  Sundararajan, R.*, Graves, J.+, Mohammed, A.+, & Baker, A. (2003). Performance Evaluation of Polymeric Insulators in the Lab and Field. Power Engineering Society (PES) Annual Conference Proceedings. USA.
76)  Rattanakhongviput, C.+, Mohammed, A.+, Soundarajan, E.+, & Sundararajan, R*. (2002). Surface Analysis of Polymeric Surge Arresters under Coastal Florida Conditions. Annual Report CEIDP. Cancun, Mexico.
77)  Chaipanit, N.+, Rattanakhongviput, C.+, Mohammed, A.+, Graves, J.+, & Sundararajan, R.* (2002). Field Aging of EPDM Transmission Line Insulator Surfaces. North American Power Symposium (NAPS). USA.
78) Chaipanit, N.+, Rattanakhongviput, C.+, & Sundararajan, R.* (2001). Accelerated Multistress Aging of Polymeric Insulators under San Francisco Coastal Environment. Annual Report CEIDP. Kitchener, Canada (7 citations).
79) Sundararajan, R.*, Pelletier, C.+, Chapaman, R.+, & Nowlin, R. (2001). Accelerated Multistress Aging of Polymeric Insulators – A Case Study: Detroit. International Symposium on High Voltage engineering (ISH). Bangalore, India.
80) Sundararajan, R.+, Pelletier, C.+, Chapman, R.+, Pollock, T.+, Nowlin, R., & Baker, A. (2000). Multistress Aging of Polymeric Insulators. Annual Report CEIDP. Victoria, BC, Canada (2 citations).
81) Sundararajan, R.*, Sundhar, S., & Asokan, T. (1999). Electrohydrodynamics of Water Droplets on Polymer Surfaces. IEEE Conference on Industrial Applications Society. Phoenix, AZ, USA (4 citations).
82) Pollock, T.+, Pelletier, C.+, Chapman, R.+, Sundararajan, R.*, Nowlin, R., Mendez, R., & Baker, A. (1999). Performance of Polymeric insulators under Multistress Conditions. Annual Report CEIDP. Austin, TX, USA (7 citations).
83) Karady, G.*, Amarh, F.+, & Sundararajan, R. (1999). Dynamic Modeling of AC Insulator Flashover Characteristics. International Symposium on High Voltage Engineering (ISH). UK (5 citations).
84) Pollock, T.+, Sundararajan, R.*, Nowlin, R., Thomas, K., & Lynch, M. (1998). Analysis of Polymeric Insulators. Annual Report CEIDP. USA.
85) Sundararajan, R.*, Madhavan, S.+, Lynch, M., & Sundhar, S. (1997). Surface Properties of Artificially Contaminated Polymeric Cable Terminations. Annual Report CEIDP. USA (1 citation).
86) Sundararajan, R.*, Nowlin, R. (1996). Effect of High Altitude on the Flashover Voltage of Contaminated Insulators. Annual Report CEIDP. USA (13 citations).
87) Sundararajan, R. (1996). A Computational Study of Flashover Voltage of Iced Insulators. 58th American Power Conference. Chicago, USA.
88) Sundararajan, R. (1995). Preliminary Theoretical Study on the Flashover Voltage of Polymeric Insulators. Annual Report CEIDP. USA.
89) Sundararajan, R., & Gorur, R.* (1994). Influence of Inert Particles on the Pollution Flashover Voltage of Porcelain Insulators. Annual Report CEIDP. USA.
90) Sundararajan, R., & Gorur, R.* (1993). Study of Pollution Performance of DC Station Post Insulators Using a Dynamic Arc Model. Annual report CEIDP. USA (1 citation).
91) Sundararajan, R.*, & Gorur, R. (1992). Influence of Profiles on DC Insulator Performance Under Polluted Conditions. Annual Report CEIDP, Canada.
92) Sundararajan, R., * & Gorur, R. (1991). Dynamic Modeling of Flashover on Dielectric Surfaces. IEEE International Conference on Properties and Applications of Dielectric Materials. Tokyo, Japan.
93) Sundararajan, R., & Gorur, R. (1990). Dynamic Arc Modeling of DC Flashover Under Contaminated Conditions. Annual Report CEIDP, USA.
94) Ravindra, G.S., Rajput, C., Sundararajan, R.*, Kishore, N.K.*, & Nagabhushana, G.R.* (1989). Lightning Protection of a Nose Radome. International Conference on Electromagnetic Interference and Compatibility (INCEMIC). Bangalore, India.
95) Kishore, N.K.,* Sundararajan, R.,* & Nagabhushana, G.R. (1989). Ground Potentials and Currents Due to Lightning Strokes. INCEMIC. Bangalore, India.

Learning-Related

96) Foreman, C., Halim, K., and Sundararajan, R. (2014). The future of coal. ASEE, Indianapolis, IN.

97) Turner, M., Foreman, C., and Sundararajan, R. (2014). Computer simulation tools to enhance undergraduate power systems education. ASEE, Indianapolis, IN.
98) Koch, D.*, & Sundararajan, R. (2010). Energy practices in residential buildings: A global look. In Proceedings of the American Society for Engineering Education (ASEE) Annual Conference and Exposition.
99) Weir, E.* + , & Sundararajan, R. (2010). Detroit’s rise to glory. Hawaii International Conference on Social Sciences. Hawaii, USA.
100) Sundararajan, R.*, Dangelo, D., Kishore, N.K., Mogilisetti, H., Somasundaram, S.+, & Umadevi, S. (2008). Electrical Engineering education in India: Another Look. In Proceedings of the ASEE Annual Conference and Exposition.
101) Dangelo, D.*, Campbell, D.+, Harper, J.+, & Sundararajan, R.* (2008). Technical knowledge transfer for low-cost buck-boost converters. In Proceedings of the ASEE Annual Conference and Exposition.
102)  Kulatunga, N.A.*, Persson, E.*, & Sundararajan, R. (2008). Energy saving potential and characteristics of motors for consumer appliances. In Proceedings of the IEEE EIC/EME Conference. TN, USA.
103) Persson, E.*, Kulatunga, A.*, & Sundararajan, R. (2007). Challenges of applying variable speed motor drives for consumer appliances. In Proceedings of the IEEE EIC/EME Conference. TN, USA.
104) Harris, L.*, Sundararajan, R.*, Machada, D.*, & Dean, D.A.* (2006). Non-viral Gene therapy Education for Lung Diseases through Multimedia. In Proceedings of the ASEE Annual Conference and Exposition.
105) Dangelo, D.*, Macia, N., & Sundararajan, R. (2006). A New Approach to Simulating Factory Control System Problems through a PC and Four Microcontrollers. In Proceedings of the ASEE Annual Conference and Exposition.
106) Parmentier, M.J.*, Sundararajan, R.*, Haritha M., Kishore, N.K., & Umadevi, S. (2006). Engineering Education, Development, and the Digital Divide: Basis for a comparison of India and Latin America. In Proceedings of the ASEE Annual Conference and Exposition.
107) Rogers, B.*, Henderson, M.* Roberts, C., Grondin, R., Danielson, S. & Sundararajan, R. (2006). Using a Wind Power Assessment project on the Hopi Reservation as a problem-Based Learning Experience for Undergrad and Graduate Students. In Proceedings of the ASEE Annual Conference and Exposition.
108) Sundararajan, R.*, Kishore, N.K., & Parmentier, M.J.* (2006). A Preliminary Model Curriculum For The Global Engineer. 5th ASEE Global Colloquium on Engineering Education. Brazil.
109) Parmentier, M.J.,* Sundararajan, R.*, Kishore, N.K., Mogilisetti, H., & Umadevi, S. (2006). Engineering Education, Development, and the Digital Divide: Basis For A Comparison Of India And Latin America . 5th ASEE Global Colloquium on Engineering Education. Brazil.
110) Parmentier, M.J.*, Sundararajan, R.*, & Macia, N. (2006). A Model Engineering Curriculum For Local Development In Latin America . 5th ASEE Global Colloquium on Engineering Education. Brazil.
111) Dangelo, D.* +, Sundararajan, R., & Macia, N. (2006). A Novel approach to simulating factory control system problems through a PC and four Microcontrollers. 5th ASEE Global Colloquium on Engineering Education. Brazil.
112)  Parmentier M.J.*, & Sundararajan, R. (2005). Designing Interdisciplinary Graduate Education in Technology and the Social Sciences. In ASEE Annual Conference and Exposition.
113) Tamizhmani, G.*, Rogers, B., & Sundararajan, R. (2004). A Multidisciplinary course on Fuel Cells: Their Science and Engineering. In ASEE Annual Conference and Exposition.
114) Sundararajan, R., Rogers, B., & Tamizhmani, G.* (2004). A Practice-Based Multidisciplinary Fuel Cell Course. In World Congress for Education. Brazil.
115) Rogers, B., Tamizhmani, G.*, Sundararajan, R. & Danielson, S. (2003). An Innovative Fuel Cell Theory, Testing, and Manufacturing Course. American Society of Mechanical Engineering. USA.
116) Sundararajan, R. (2003). A Power Electronics Course for Electronics Engineering Technology. NSF-ONR Sponsored Faulty Workshop Proceedings. ASU, Tempe, AZ, USA.
117) Sundararajan, R.*, & Chowdhury, F.* (2001). Incorporating Research into Undergraduate Courses: A Case Study. In ASEE GSW. Texas, USA.
118)  Nowlin, R.*, Gao, Q.+, & Sundararajan, R. (2000). Building Interactive Tutorials Using Visual Basic. In ASEE Annual Conference and Exposition.
119) Lipari, C.*, Sisterna, C.+, Sundararajan, R. & Nowlin, R. (1999). VHDL Modeling & Synthesis in the Laboratory. In ASEE Annual Conference and Exposition (Nominated for Best paper award).
120) Nowlin, R.*, Soman, S.+, & Sundararajan, R. (1998). Synthesis Modeling Techniques in VHDL. In ASEE Annual Conference and Exposition.
121) Nowlin, R.*, & Sundararajan, R. (1997). A VHDL Course for Electronics Engineering Technology. In ASEE Annual Conference and Exposition.
122) Nowlin, R.*, & Sundararajan, R.* (1996). The State of Electronics and Computer Engineering Technology at Arizona State University. ASEE-PSW Annual Conference. San Jose, USA.

Conference summaries or abstracts (100% with students)
1) Sundararajan, R.*, et al.(2008). Enhanced tamoxifen uptake for breast cancer treatment using electroporation. MedChem India. Bangalore, India.
2) Sundararajan, R.*, Gonzales, J.+, & Shao, J.+ (2003). Solid state high voltage pulsers for biological applications - A preliminary study. ElectroMed, TX.
3) Sundararajan, R.*, & Gonzales, J+. (2003). Design and building of high voltage nanosecond pulse generators for biological applications. IEEE IAS/ESA Joint Meeting, Little Rock, AR

Books


Sundararajan, R. (2014). Electroporation-based Cancer Therapies: Basic to Clinical Applications. Woodhead Publishing (Editor and author/coauthor of 9/12 articles).

Invited Chapters in books


1) Camarillo, I.G., Xiao, F.+, Natarajan, A. & Sundararajan, R*. (2013). Electrically-enhanced Tamoxifen delivery for breast cancer treatments. In Tamoxifen: Concepts and cancer: New Paradigms. Ed. R. Mello. Nova Science Publishers, Inc., NY, USA.
2) Natarajan, A.*, Campana, L., & Sundararajan, R.* (2012). Electrically-enhanced delivery of immune particles for breast cancer therapy, in Antibody-mediated (mAB) Drug Delivery Systems (DDS): Concepts, Technology, and Applications, John Wiley and Sons.
3) Natarajan, A.*, Sundararajan, R., & DeNardo, S. (2008). Magnetic nanoparticles for Cancer imaging and Therapy, in Magnetic Nanomaterials. Edited by S.S.R. Kumar, Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim, 2009, Chapter, 6, pp. 209-258 (Nanomaterials for  the Life Sciences Vol. 4).
4) Sundararajan, R. (2008). Nano-Electroporation: A First Look. In Electroporation Protocols: Experimental and Clinical Medicine. Ed. Shulin Li, Methods in Molecular Biology 423, Chapter 7, 109 - 130, Humana Press, New Jersey.
5) Sundararajan, R.*, Peterson, E.*, & Nowlin, R. (2007). Attenuators.  In Wiley Encyclopedia of Electrical & Electronics Engineering, Wiley & Sons, New York.
6) Sundararajan, R.*, Peterson, E.*, & Nowlin, R. (1999). Attenuators. Wiley Encyclopedia of Electrical & Electronics Engineering, 2, 17 - 45, John Wiley & Sons, New York.

Government, University, Industrial Reports and Standards


1) High frequency fuse characteristics, American Electric Power Company (AEP), Ohio, Aug 2008.
2) 5000h Aging of TPE insulators under modified IEC 61109 conditions – GLP Hi-Tech, Canada, 2005.
3) Bird-related outages, EPRI, 2003.
4)    Multistress aging of Polymeric Insulators in various in-service conditions. Final Report, NSF, 2002.
5)    Investigation of long Term Electrical Performance of Polymeric Insulators under Multistress Environments, Final Report, NSF, May 1999.
IEEE Standards:
1) IEEE Std 1651 - Guidelines for Reducing Bird-related outages (2011). Sundararajan, R. (Chair of the Task Force and Principal Author), et al. IEEE Press, NJ, USA.
2) IEEE Std 957 - Guidelines for Reducing Bird Related Outages (2005). IEEE press. Sundararajan, R. (Chair of the Task Force and Principal Author), et al. IEEE press, NJ, USA.
3) IEEE Std 1067 - Guide for in-service use, care, maintenance, and testing of conductive clothing for use on voltages up to 765kV ac and ±750kV dc (2003). IEEE Press. Schweitzer, L, et al.
4) IEEE Std 1783 - Guidelines for test methods and procedures to evaluate the electrical performance of insulators in freezing conditions (2009). IEEE press. Farzaneh, M. et al.

Pages