Publications

Research Publications and Presentations

Department: Engineering Technology

Ayhan Ince

SELECTED JOURNAL PUBLICATIONS

  1. Ince, A., Glinka, G. and Buczynski, A.,  “A Computational Modeling Technique of Elasto-Plastic Stress-Strain Response for Notched Components”, International Journal of Fatigue, Vol.62, pp. 42-52,  2014.
  2. Ince, A. and Glinka, G.,  “A Generalized Damage Parameter for Multiaxial Fatigue Life Prediction under Proportional and Non-Proportional Loadings”, International Journal of Fatigue, Vol.62, pp. 34-41,  2014.
  3. Ince, A., “Computational Fatigue Modeling of Notched Components”, Modeling and Numerical Simulation of Material Science, Vol.3, No.3A, p.14-22, 2013.
  4. Ince, A. and Glinka, G., “A Numerical Method for Elasto-Plastic Notch-Root Stress-Strain Analysis,” Journal of Strain Analysis for Engineering Design, Vol. 48, No. 4, pp. 229-224, 2013.
  5. Noban M., Jahed H., Ibrahim E. and Ince, A., “Load path sensitivity and fatigue life estimation of 30CrNiMo8HH”, International Journal of Fatigue, Vol.37, pp.123–133, 2012.
  6. Ince, A. and Glinka, G., “A modification of Morrow and Smith-Watson-Topper mean stress correction models”, Fatigue and Fracture of Engineering Materials and Structures, Vol.34, pp.854–867, 2011.
  7. Noban, M., Jahed, H., Winkler, S. and Ince, A., “Fatigue characterization and modeling of 30CrNiMo8HH under multiaxial loading”, Materials Science and Engineering A, 528 (6), 2484-2494, 2011.

SELECTED CONFERENCE PAPERS

  1. Ince, A. and Glinka G., “Innovative Computational Modeling of Multiaxial Fatigue Analysis for Ground Vehicle Notched Component”, International Conference on Fatigue Damage of Structural Materials X, Hyannis, MA, USA, 2014.
  2. Ince,  A., "A Novel Technique for Computational Multiaxial Fatigue Modeling of Notched Components", ASME 2013 Mechanical Engineering Congress & Exposition, San Diego, CA, USA, 2013.
  3. Ince, A., Glinka, G. and Buczynski, A., “A Critical Plane Damage Parameter for Multiaxial Fatigue Life under Proportional and Non-proportional Loadings”, International Conference on Fatigue Damage of Structural Materials IX, Hyannis, MA, USA, 2012.
  4. Ince,  A. and Glinka G., “Computational Modeling of Multiaxial Elasto-plastic Stress-strain Analysis for Notched Components under Non-proportional Loading”, International Conference on Fatigue Damage of Structural Materials IX, Hyannis, MA, USA, 2012.
  5. Noban, M., Jahed, H. and Ince, A., “Loading phase angle effect on multiaxial behaviour of 30CrNiMo8HH”, 9th International Conference on Multiaxial Fatigue and Fracture, ICMFF9, Parma, Italy, June 2010.
J Jacob

Textbooks

  1. Analog Integrated Circuits Applications, 2000, Prentice-Hall
  2. Power Electronics: Principles & Applications, 2002, Delmar
  3. Advanced AC Electronics:Principles & Applications, 2004, Delmar
Henry Kraebber

Selected journal articles and conference papers

  1. Kraebber, H & Lehman, J. (2009). Use of Educational Technology in Manufacturing Engineering and Technology Education. 39th ASEE/IEEE Frontiers in Education Conference, October 2009. San Antonio, TX.
  2. Dues, J., Fuehne, J., Cooley, T., Denton, N., & Kraebber, H. (2008). Assessment for continuous improvement: Embedding it in the culture. Journal of Engineering Technology, 25(2), 10-17.
  3. Denton, N., Fuehne, J., Kraebber, H., Dues, J., & Cooley, T. (2007). The TC2K visit is done – now what?. [CD-ROM]. Proceedings of the 2007 Annual Conference, American Society for Engineering Education, Honolulu, HI.
  4. Kraebber*, H. W., Hartin, J. R., & Denton, N. D. (2005). Developing an educational process for an engineering technology program. [CD-ROM]. Proceedings of the 2005 Annual Conference, American Society for Engineering Education, Portland, OR.

Study Guides and/or Workbooks

  1. Contributed to a 70 course module series sponsored by the National Science Foundation that makes up the "novel" curriculum design for manufacturing engineering technology for the National Center of Manufacturing Education in Dayton, Ohio. Prof. Kraebber was responsible for the selection of authors and reviewers for these modules. He served as a co-author of approximately one third of each module and leader of the review process for all written material.
  2. Martin, T., Kraebber, H., & Stephens, M. (2003). Manufacturing Facilities Design. National Center of Excellence for Advanced Manufacturing Education. Dayton, OH: Sinclair Community College, 120 pages.
  3. Elliott, S. J., Hilbert, G. A. & Kraebber, H. W. (2003). Data Acquisition and Analysis. National Center of Excellence for Advanced Manufacturing Education. Dayton, OH: Sinclair Community College, 83 pages.
  4. Anderson, R., Castillo, A., Kraebber, H., & Lunn, T. (2002). Manufacturing resource planning. National Center of Excellence for Advanced Manufacturing Education. Dayton, OH: Sinclair Community College, 120 pages.
  5. Anderson, S., Kraebber, H., & Martin, T. (2001). Equipment selection. National Center of Excellence for Advanced Manufacturing Education. Dayton, OH: Sinclair Community College, 103 pages.
  6. Gross, J., Kraebber, H., & Larsh, B. (2001). Manufacturing work cell design. National Center of Excellence for Advanced Manufacturing Education. Dayton, OH: Sinclair Community College, 119 pages.

Textbooks

  1. Professor Kraebber is co-author with James Rehg of the text, Computer Integrated Manufacturing, 3rd ed, (2005).
  2. Dr. Kraebber's work has published in journals and confernece proceedings on teaching in manufacturing. Please send a message to request specific publications or for information about the textbook. kraeb@purdue.edu
Jan Lugowski

Published journal articles

  1. Lugowski, J. (1988). Harmonic-Drive-Getriebe selbst bauen  [How to Build a Harmonic Drive]. Werkstatt und Betrieb 121, No. 2, pages 109-111.
  2. Lugowski, J. (1985). Adaptives Grenzregelsystem einer Flachschleifmachine [An Adaptive Constraint Control System for a Surface Grinder]. Werkstatt und Betrieb 118, No. 4, pages 201-204.    
  3. Lugowski, J. (1992). Flow Force Compensation in a Hydraulic Valve. Sterowanie i Naped Hydrauliczny [Hydraulic power and Control], Vol. 12, No. 2, p. 22 (in Polish).
  4. Lugowski, J. (1991). Flow forces in a Spool-Type Hydraulic Valve. Sterowanie i Naped Hydrauliczny [Hydraulic power and Control], Vol. 11, No. 6, pages 15-20 (in Polish).

Reviewed conference proceedings (with presentation)

  1. Lugowski, J.T. (2003). Design Class Projects in Fluid Power. Proceedings of the American Society for Engineering Education (ASEE) – Annual Conference, June 22-25, CD-ROM - Session 3648, 10 msp. Nashville, Tennessee.
  2. Lugowski, J.T. (2003). Critical-Thinking Approach to Teaching Mechanical Engineering. Proceedings of the ASEE– Annual Conference, June 22-25, CD-ROM - Session 3449, 4 msp. Nashville, Tennessee.
  3. Lugowski, J.T. (2003). Introducing State-Of-The-Art Technology Into Fluid Power Laboratory. Proceedings of the ASEE – IL/IN Sectional Conference, April 4-5, - Session 2C, 4 msp. Valparaiso, Indiana.
  4. Lugowski*, J.T., Widmer*, S.E. (2002). Problem Based Learning of Data Acquisition and Computer-Based Control Applications in MET Courses. Proceedings of the ASEE – Annual Conference, June 16-19, CD-ROM - Session 2359, 11 msp. Montreal, Quebec.
  5. Lugowski, J.T. (2002). Development of a Competency-Based Introductory Course in Fluid Power. Proceedings of the ASEE – Annual Conference, June 16-19, CD-ROM - Session 1449, 8 msp. Montreal, Quebec.
  6. Lugowski, J.T. (2002). Good Problems for Fluid Power and Controls Courses. Proceedings of the ASEE – IL/IN Sectional Conference, April 11-12, (pages 217-221). Chicago, Illinois.
  7. Lugowski, J.T. (2001). Using Rapid Prototyping to Integrate Design into a Course. Proceedings of the ASEE – Annual Conference, June 24-27, CD-ROM - Session 2650, 11 msp. Albuquerque, New Mexico.
  8. Lugowski, J.T. (2001). Mastering a LabVIEW Program within one Lab Session. Proceedings of the ASEE – IL/IN Sectional Conference, March 29-31, 5 msp. Session S4-4. West Lafayette, Indiana.
  9. Denton*, N. L., Lugowski*, J., Knoll, J. (2000). Evaluation of an Industry Project in a Freshman Course. Proceedings of the ASEE – Annual Conference, June 18-21, CD-ROM - Session 2647, 9 msp. St. Louis, Missouri.
  10. Lugowski, J. (2000). Static-Pressure Measurements in the Orifice of a Hydraulic Valve. Proceedings of the American Society of Mechanical Engineers (ASME)  - Fluids Engineering Division Summer Meeting, June 11-15, CD-ROM paper No. FEDSM2000-11124, 5 msp. Boston, Massachusetts.
  11. Lugowski, J. (1999). One of the Mysteries in Fluid Mechanics. American Society for Engineering Education (ASEE) – Annual Conference, June 20-23, CD-ROM - Session 3548, 5 msp. Charlotte, North Carolina. This paper received a “Best Session Paper Award.”
  12. Lugowski, J. (1993). The Origin of the Flow Force in Hydraulic Valves. Proceedings of the 8th International Conference on Pneumatics and Hydraulics, pages 390-395 (in German). Miskolc, Hungary.
  13. Lugowski, J. (1993). The Source of the Flow Force in Hydraulic Piston Valves. Proceedings of the 9th Conference on Hydraulics and Pneumatics, pages 373-378 (in German). Dresden, Germany.
  14. Lugowski, J. (1993). Experimental Investigations of the Origin of Flow Forces in Hydraulic Piston Valves. In N. Way (Ed.), Proceedings of the International Conference on Fluid Power—the Future for Hydraulics, Brugge, Belgium, pages 233-244. London: Mechanical Engineering Publications Ltd.
  15. Lugowski, J. (1991). Flow Force Compensation in a Hydraulic Piston Valve. Proceedings of the 22nd Midwestern Mechanics Conference, pages 503-504. Rolla: University of Missouri-Rolla.
  16. Lugowski, J. (1991). Flow Forces in a Spool-Type Hydraulic Valve. Proceedings of the 22nd Midwestern Mechanics Conference, pages 374-375. Rolla: University of Missouri-Rolla.
  17. Batsch, A.* and Lugowski*, J. (1985). Dynamic Characteristics of the Hydrostatic Bearing as a Measuring Sensor. Proceedings of the 6th Conference on Hydraulics and Pneumatics, pages 561-566 (in German). Magdeburg, Germany.
  18. Lugowski, J. (1983). A Hydraulic Piston Valve with a Strongly Compensated Flow Force. Proceedings of the 5th Conference on Hydraulics and Pneumatics, pages 602-606 (in German). Dresden, Germany.
  19. Batsch*, A. and Lugowski*, J. (1981). Flow Force in a Piston Valve. Proceedings of the 4th Conference on Hydraulics and Pneumatics, pages 498-504 (in German). Magdeburg, Germany.
  20. Lugowski, J. (1980). An Analogue Model of an Adaptive Constraint Control System of a Surface Grinder. Proceedings of the International Conference on Adaptive Control in Mechanical Engineering AC’80, pages 184-193 (in Polish). Rydzyna, Poland.
  21. Lugowski, J. (1977). An Adaptive Constraint Control (ACC) System of a Surface Grinder. Proceedings of the Mechanical Engineering Committee of the Polish Academy of Sciences, pages 31-36 (in Polish). Rzeszow, Poland.

Published abstracts

  1. Lugowski, J. (2002). Fluid Power Education at Purdue. ASME Fluid Power Systems and Technology Division Newsletter, page 9. Spring edition.
  2. Lugowski, J. (1988). A Hydrostatic Bearing. Machine Design, September 8, page 36.

Patents

  1. Batsch*, A., and Lugowski*, J. (1986). Polish patent No. 131831. Testing Equipment for the Perforating Machine. Warsaw, Poland. Patent Office.
  2. Lugowski, J. (1986). Polish patent No. 141196. A Harmonic Drive. Warsaw, Poland. Patent Office.
  3. Lugowski, J. (1985). Polish patent No. 135336. A Sealing Diaphragm for Hydraulic Control Valves. Warsaw, Poland. Patent Office.
  4. Lugowski, J. (1984). Polish patent No. 133716. A Hydrostatic Bearing. Warsaw, Poland. Patent Office.
  5. Lugowski, J. (1984). Polish patent No. 133718. A Hydrostatic Bearing. Warsaw, Poland. Patent Office.
  6. Lugowski, J. (1984). Polish patent No. 133723. A Metering Valve. Warsaw, Poland. Patent Office.
  7. Lugowski, J. (1984). Polish patent No. 133717. A Hydrodynamic Bearing. Warsaw, Poland. Patent Office.
  8. Batsch*, A., Lugowski*, J. (1981). Polish patent No. 123378. A Hydraulic Valve with a Strongly Compensated Flow Force. Warsaw, Poland. Patent Office.
  9. Batsch*, A., Oczos*, K., and Lugowski*, J. (1981). Polish patent No. 110882. Perforating Machine for Plastic Tubes. Warsaw, Poland. Patent Office.
  10. Batsch*, A., and Lugowski*, J. (1980). Polish patent No. 113308. An ACC System of a Surface Grinder. Warsaw, Poland. Patent Office.                     

International lecture

  1. Flow Force in Hydraulic Valves, Institute for Fluid Power Drives and Controls  (IFAS) at Aachen University (RWTH), Germany. Professor Lugowski presented his research of flow forces in hydraulic valves (in 2003).

Locally published instructional materials

  1. Fletcher*, R.D., Lugowski*, J.T. and Stern*, H. (2002). Fluid Power. Facilitator Guide. 159 pages. National Center of Excellence for Advanced Manufacturing Education, Sinclair Community College, Dayton, Ohio.
  2. Lugowski*, J.T., Hutzel*, W.J. and Denton, N.L. (2002). Controls And Instrumentation For Automation, MET 382 Laboratory Manual. Spring 2003 Edition, 147 pages. Mechanical Engineering Technology, Purdue University, West Lafayette, Indiana: Copymat.
  3. Lugowski, J.T. 2009. MET 334 Advanced Fluid Power Laboratory Manual. 84 pages. Mechanical Engineering Technology, Purdue University, West Lafayette, Indiana: BoilerCopyMaker.
  4. Lugowski, J.T. 2009. MET 432 Hydraulic Control Motion systems Laboratory Manual. 78 pages. Mechanical Engineering Technology, Purdue University, West Lafayette, BoilerCopyMaker.
  5. Lugowski, J.T., Widmer, S.E.(2009). MET 230L Fluid Power Laboratory Manual. 127 pages. Mechanical Engineering Technology, Purdue University, West Lafayette, IN: Learning Systems.
  6. Lugowski, J. (1992). Obrabiarki. Laboratorium [Laboratory of Machine Tools] 2nd ed. upgraded, 109 pages. Department of Mechanical Engineering, Rzeszow, Poland: Rzeszow University of Technology Press.
John Sheffield
  1. Hamad, T.A., Agll, A.A., Hamad, Y.M., Bapat, S., Thomas, M., Martin, K.B., Sheffield, J.W., Study of a molten carbonate fuel cell combined heat, hydrogen and power system (2014) Energy, 75, pp. 579-588.
  2. Hamad, T.A., Agll, A.A., Hamad, Y.M., Sheffield, J.W., Solid waste as renewable source of energy: Current and future possibility in Libya (2014) Case Studies in Thermal Engineering, 14, pp. 144-152.
  3. Vaz. W., Sheffield, J.W., Preliminary Assessment of Greenhouse Gas Emissions for Atactic Polypropylene (APP) Modified Asphalt Membrane Roofs, (2014) Building and Environment, 78, pp. 95-102.
  4. Agll, A.A., Hamad, Y.M., Hamad, T.A. Sheffield, J.W., Study of energy recovery and power generation from alternative energy source, (2014) Case Studies in Thermal Engineering, 4, pp. 92-98.
  5. Hamad, Y.M., Hamad, T.A., Agll, A.A., Bapat, S.G., Bauer, C., Clum, A., Shivaprasad, N., Thomas, M., Sheffield, J., A design for hydrogen production and dispensing for northeastern United States along with its infrastructural development timeline, (2014) International Journal of Hydrogen Energy 39 (19), pp. 9943-9961.
  6. Hamad, T.A., Agll, A.A., Hamad, Y.M., Bapat, S.G., Thomas, M., Martin, K.B., Sheffield, J.W., Hydrogen production and end-uses from combined heat, hydrogen and power system by using local resources, (2014) Renewable Energy, 71, pp. 381-386.
  7. Hamad, T.A., Agll, A.A., Hamad, Y.M., Bapat, S., Thomas, M., Martin, K.B., Sheffield, J.W., Study of combined heat, hydrogen and power system based on a molten carbonate fuel cell fed by biogas produced by anaerobic digestion, (2014) Energy Conversion and Management, 81, pp. 184-191.
  8. Hamad, T.A., Agll, A.A., Hamad, Y.M., Bapat, S., Thomas, M., Martin, K.B., Sheffield, J.W., Hydrogen recovery, cleaning, compression, storage, dispensing, distribution system and End-Uses on the university campus from combined heat, hydrogen and power system, (2014) International Journal of Hydrogen Energy, 39 (2), pp. 647-653.
  9. Sheffield, J. W., Martin, K. B., Folkson, R. (2014). Electricity and hydrogen as energy vectors for transportation vehicles. In Folkson, R (Ed.), Alternative Fuels and Advanced Vechicle Technologies for Improved Environmental Performance (pp. 117-137). Woodhead Publishing Limited.

  10. Hamad, T.A., Agll, A.A., Hamad, Y.M., Bapat, S., Thomas, M., Martin, K.B., Sheffield, J.W., Study of a molten carbonate fuel cell combined heat, hydrogen and power system: End-use application, (2013) Case Studies in Thermal Engineering, 1 (1), pp. 45-50.
  11. Agll, A.A.A., Hamad, Y.M., Hamad, T.A., Thomas, M., Bapat, S., Martin, K.B., Sheffield, J.W., Study of a molten carbonate fuel cell combined heat, hydrogen and power system: Energy analysis, (2013) Applied Thermal Engineering, 59 (1-2), pp. 634-638.
  12. Hamad, Y.M., Hamad, T.M., Agll, A.A., Martin, K.B., Thomas, M., Bapat, S.G., Sheffield, J.W., Molten carbonate fuel cell combined heat, hydrogen and power systems: feedstock analysis, (2013) Energy Science and Technology, Vol. 6 (2), pp. 31-35.
  13. Mohan, V., Shah, A., Sheffield, J.W., Martin, K.B., Design of a hydrogen community, (2012) International Journal of Hydrogen Energy, 37 (2), pp. 1214-1219.
  14. Shah, A., Mohan, V., Sheffield, J.W., Martin, K.B., Solar powered residential hydrogen fueling station, (2011) International Journal of Hydrogen Energy, 36 (20), pp. 13132-13137.
  15. Cottrell, C.A., Grasman, S.E., Thomas, M., Martin, K.B., Sheffield, J.W., Strategies for stationary and portable fuel cell markets, (2011) International Journal of Hydrogen Energy, 36 (13), pp. 7969-7975.
  16. Thomas, M., Martin, K.B., Grasman, S.E., Sheffield, J.W., Arauco, E.A.A., Design layout of hydrogen research and development garage, (2011) International Journal of Hydrogen Energy, 36 (13), pp. 8017-8022.
  17. Sheffield, J.W., Koylu, U.O., A rural hydrogen transportation test bed, (2009) International Journal of Hydrogen Energy, 34 (14), pp. 6000-6004.
  18. Finney, D.L., Holcomb, F.H., Sheffield, J.W., Tupper, S.H., Hydrogen-fueled buses for DOD, (2008) Military Engineer, 100 (654), pp. 67-68.
  19. Sheffield, J.W., Energy security through hydrogen, (2007) NATO Security through Science Series C: Environmental Security, pp. 1-8. Springer (ISBN 978-1-4020-6441-8).
  20. Sheffield, J. W., Sheffield, C. (2007). In Sheffield, J.W., Sheffield, C. (Ed.), Assessment of hydrogen energy for sustainable development. Springer (ISBN 1871-4668).

  21. Sheffield, J. W., Energy Convention Groningen 2005, "UNIDO-ICHET Pilot Projects," Energy Academy Europe, Groningen, The Netherlands. (October 27, 2005).

  22. Sheffield, J. W., 2nd National Conference for Hydrogen Technologies, "UNIDO-ICHET Pilot Projects," The Centre for Research & Technology, Hellas, Thessaloniki, Greece. (October 20, 2005).

  23. Sheffield, J. W., 1st International Conference on Hydrogen Safety, "Assessment of Integrated Hydrogen Energy Systems in UNIDO-ICHET Pilot Projects," European Commission, Pisa, Italy. (September 9, 2005).

  24. Sheffield, J. W., 1st World Congress of Young Scientists on Hydrogen, "UNIDO-ICHET Programs for Hydrogen Applications and Energy Systems," Italian National Agency for New Technologies, Energy and Sustainable Economic Development, Torino, Italy. (May 19, 2005).

  25. Syed, M.T., Sherif, S.A., Veziroglu, T.N., Sheffield, J.W., Second law analysis of hydrogen liquefiers operating on the modified Collins cycle, (2001) International Journal of Energy Research, 25 (11), pp. 961-978.
  26. Sheffield, J. W., 23rd World Energy Engineering/Environmental Technology Expo/Plant & Facilities Expo, "Enhancing Energy Assessments Through Partnerships," Association of Energy Engineers, Atlanta, GA. (October 26, 2000).

  27. Romero, H., Ambriz, J.J., Ortiz, J.N., Sheffield, J.W., Joint Mexico/USA energy audits: a case study, (1999) Energy Engineering: Journal of the Association of Energy Engineering, 96 (6), pp. 17-28.
  28. Sheffield, J. W., 21th World Energy Engineering/Environmental Technology Expo/Plant & Facilities Expo, "Joint Mexico/USA Energy Audits: A Case Study," Association of Energy Engineers, Atlanta, GA. (November 5, 1998).

  29. Syed, M.T., Sherif, S.A., Vezirog̃lu, T.N., Sheffield, J.W., An economic analysis of three hydrogen liquefaction systems, (1998) International Journal of Hydrogen Energy, 23 (7), pp. 565-576.
  30. Sheffield, J. W., XVIII Seminario Nacional Sobre el Uso Racional de la Energia y Exposicion de Equipos y Servicios (ATPAE), "Energy Conservation in Manufacturing Plants of Textile Products Made from Fabrics: A Case Study," El Fideicomiso para el Ahorro de Energía Eléctrica (FIDE), Mexico DF, Mexico. (September 25, 1997).

  31. Sheffield, J. W., XVII Seminario Nacional Sobre el Uso Racional de la Energia y Exposicion de Equipos y Servicios (ATPAE), "Industrial Energy Audits," El Fideicomiso para el Ahorro de Energía Eléctrica (FIDE), Mexico D.F., Mexico. (November 28, 1996).

  32. Sheffield, J. W., 19th World Energy Engineering Congress, "A Strategic Management Approach for Energy and Waste Minimization Assessment Centers," Association of Energy Engineers, Atlanta, GA. (November 7, 1996).

  33. Sheffield, J. W., 2nd Annual Congress of the Mexican Association for Energy Economics: “Energy Transitions in Mexico, Central America and South America”, "Energy in Latin America: Present and Future," Mexican Association for Energy Economics, Mexico D.F., Mexico. (September 24, 1996).

  34. Sheffield, J. W., 1996 Annual Conference and Exposition of the American Society for Engineering Education, "Electric Demand Reduction for Industrial Plants," American Society for Engineering Education, Washington, D.C. (June 26, 1996).

  35. Chung, K.C., Benson, H.K., Sheffield, J.W., Thermal contact conductance of ceramic substrate junctions, (1995) Journal of Heat Transfer, 117 (2), pp. 508-510.
  36. Chung, Kee-Chiang, Sheffield, John W., Enhancement of thermal contact conductance of coated junctions, (1995) Journal of thermophysics and heat transfer, 9 (2), pp. 329-334.
  37. Zhang, L., Sherif, S.A., Veziroǧlu, T.N., Sheffield, J.W., Performance analysis of reciprocating magnetic liquefiers, (1994) International Journal of Hydrogen Energy, 19 (12), pp. 945-956.
  38. Gürsu, S., Sheriff, S.A., Vezirocǧlu, T.N., Sheffield, J.W., Review of slush hydrogen production and utilization technologies, (1994) International Journal of Hydrogen Energy, 19 (6), pp. 491-496.
  39. Zhang, L., Sherif, S.A., Veziroĝlu, T.N., Sheffield, J.W., On exergy losses in AMR hydrogen liquefiers, (1994) International Journal of Hydrogen Energy, 19 (5), pp. 447-452.
  40. Sheffield, J. W., 17th World Energy Engineering Congress, "In Transition from Energy Audits to Industrial Assessements," Association of Energy Engineers, Atlanta, GA. (December 8, 1994).

  41. Gursu, S., Sherif, S.A., Veziroglu, T.N., Sheffield, J.W., Analysis and optimization of thermal stratification and self pressurization effects in liquid hydrogen storage systems - Part 1: model development, (1993) Journal of Energy Resources Technology, Transactions of the ASME, 115 (3), pp. 221-227.
  42. Gursu, S., Sherif, S.A., Veziroglu, T.N., Sheffield, J.W., Analysis and optimization of thermal stratification and self-pressurization effects in liquid hydrogen storage systems - part 2: model results and conclusions, (1993) Journal of Energy Resources Technology, Transactions of the ASME, 115 (3), pp. 228-231.
  43. Zhang, L., Sherif, S.A., Veziroglu, T.N., Sheffield, J.W., Second law analysis of active magnetic regenerative hydrogen liquefiers, (1993) Cryogenics, 33 (7), pp. 667-674.
  44. Chung, K.C., Sheffield, J.W., Sauer Jr., H.J., O'Keefe, T.J., Williams, A., Thermal contact conductance of a phase-mixed coating layer by transitional buffering interface, (1993) Journal of Thermophysics and Heat Transfer, 7 (2), pp. 326-333.
  45. Chung, K.C., Sheffield, J.W., Sauer Jr., H.J., Thermal constriction resistance of phase-mixed metallic coatings, (1992) Journal of Heat Transfer, 114 (4), pp. 811-818.
  46. Chung, K. C., Sheffield, J. W., Sauer, H. J. (1992). Effects of Metallic Coated Surfaces on Thermal Contact Conductance:  An Experimental Study. In T. N. Veziroglu (Ed.), Heat and Mass Transfer: An Era of Change (vol. 1). Nova Science Publishers, Inc.

  47. Sheffield, J. W., NSF/DITAC Collaborative Workshop - Thermal Conductance Enhancement in Microelectronics, "Overview of Microelectronics and Thermal Contact Conductance," NSF/DITAC, Melbourne, Australia. (May 5, 1992).

  48. Sheffield, J. W., NSF/DITAC Collaborative Workshop - Thermal Conductance Enhancement in Microelectronics, "Thermal Contact Conductance of Metal to Metal and Metal to Ceramic Joints within Microelectronic Packages," NSF/DITAC, Melbourne, Australia. (May 5, 1992).

  49. Zhang, L., Veziroglu, T.N., Sherif, S.A., Sheffield, J.W., Performance analysis of reciprocating magnetic liquefiers, (1991) American Society of Mechanical Engineers (Paper), pp. 1-10.
  50. Gursu, S., Veziroglu, T.N., Sherif, S.A., Sheffield, J.W., Analysis and optimization of thermal stratification and self-pressurization effects in liquid hydrogen storage systems, (1991) American Society of Mechanical Engineers (Paper), pp. 1-11.
  51. Chung, K.C., Sheffield, J.W., Sauer Jr., H.J., Thermal constriction resistance of phase-mixed metallic coatings, (1991) American Society of Mechanical Engineers, Heat Transfer Division, (Publication) HTD, 173, pp. 27-33.
  52. Sheffield, J. W., International Symposium on Energy, Environment and Economics, "Energy Conservation Opportunities for Industrial Manufacturing Facilities," Baku, Azerbaijan. (August 20, 1991).

  53. Sheffield, J. W., Wen, C., Leland, J. E. (1990). Melting heat transfer inside a cylinder. In T. N. Veziroglu (Ed.), Multiphase Transport and Particulate Phenomena (vol. 1, pp. 447-459). Hemisphere Publ. Corp.

  54. Petkov, T., Veziroǧlu, T.N., Sheffield, J.W., An outlook of hydrogen as an automotive fuel, (1989) International Journal of Hydrogen Energy, 14 (7), pp. 449-474.
  55. Wen, C., Sheffield, J.W., O'Dell, M.P., Leland, J.E., Analytical and experimental investigation of melting heat transfer, (1989) Journal of Thermophysics and Heat Transfer, 3 (3), pp. 330-339.
  56. Sheffield, J.W., Wood, R.A., Sauer Jr., H.J., Experimental investigation of thermal conductance of finned tube contacts, (1989) Experimental Thermal and Fluid Science, 2 (1), pp. 107-121.
  57. Sauer, H. J., Sheffield, J. W. (1988). A correlation for the contact conductance in finned tube heat exchanger. In D. W. Yarbrough (Ed.), Thermal Conductivity 19:  Proceedings of the Nineteenth International Thermal Conductivity Conference. New York, New York: Plenum Publishing Corporation.

  58. Sheffield, J. W., Sauer, H. J., Wood, R. A. (1987). An experimental method for measuring the thermal contact resistance of plate finned tube heat exchangers. ASHRAE Transactions, 93, pp. 776-785.

  59. Wood, R. A., Sheffield, J. W., Sauer, H. J. (1987). Thermal contact conductance of finned tubes:  a generalized correlation. ASHRAE Transactions, 93, pp. 786-797.

  60. Wood, R. A., Sheffield, J. W., Sauer, H. J. (1987). Thermal contact conductance of finned tubes:  the effect of various parameters. ASHRAE Transactions, 93, pp. 798-810.

  61. Sheffield, J.W., Stafford, B.D., Sauer Jr., H.J., Finned tube contact conductance: empirical correlation of thermal conductance, (1985) ASHRAE Transactions, 91 (pt 1A), pp. 442-452.
  62. Sheffield, J. W., Veziroglu, T. N. (1987). Hydrogen-hydride systems and applications. Proceedings of the 1986 International Congress on Renewable Energy Sources (vol. 1, pp. 786-841). Madrid, Spain: Consejo Superior de Investigaciones Cientificas.

  63. Ernest, T. L., Sheffield, J. W., Sauer, H. J. (1985). Finned tube contact conductance: characterizing the integrity of the mechanical bond, ASHRAE Transaction 91, pp. 85-99.
  64. Fox, Barry R., Brewster, Larry T., Kher, Raghav P., Sheffield, John W., Van Griethuysen, Valerie J., Design assistant for spacecraft thermal management systems. (1985) Proceedings of the Intersociety Energy Conversion Engineering Conference, pp. 425-429.
  65. Sheffield, John W., Kher, Raghav P., Van Griethuysen, Valerie J., Phase change materials for spacecraft thermal management. (1984) Proceedings of the Intersociety Energy Conversion Engineering Conference, pp. 152-157.
  66. Sheffield, J.W., Van Griethuysen, V.J., Weight Characteristics of Future Spacecraft Thermal Management Systems. (1984) AIAA Paper, 6 p.
  67. Sheffield, J.W., Veziroglu, T.N., Fundamentals and Applications of Hydrides, International Symposium-Workshop on Renewable Energy Sources.; Pakistan Council of Scientific & Industrial Research,Lahore, Pa.(1983) pp. 319-343.
  68. El-Bassuoni, A.-M.A., Sheffield, J.W., Veziroglu, T.N., Hydrogen and fresh water production from sea water, (1982) International Journal of Hydrogen Energy, 7 (12), pp. 919-923.
  69. El-Bassuoni, Abdel Monem A., Sheffield, John W., Veziroglu, T.Nejat, Thermoelectrochemical hydrogen production using sodium chloride. (1982) Alternative Energy Sources: Proceedings of the Miami International Congress on Energy and the Environment, 8, pp. 3389-3403.
  70. Chen, D. Z., Gurkan, I., Sheffield, J. W., Veziroglu, T. N. (1982). Effective Cost of Fuels: Comparison of Hydrogen with Fossil Fuels. In T.N. Veziroglu, W.D. Van Vorst, J.H. Kelley (Ed.), Hydrogen Energy Progress - IV (vol. 4, pp. 1523-1538). Pergamon Press.

  71. Sheffield, J. W. (1982). Enhanced Heat Conduction During Solidification of Thermal Energy Storage Systems. In T. N. Veziroglu (Ed.), Alternative Energy Sources IV (vol. 1, pp. 357-365). Ann Arbor Science.

  72. Mentes, A., Veziroglu, T.N., Samudrala, R., Sheffield, J.W., Williams, A., Effect of Interface Gases on Contact Conductance. (1981) AIAA Paper, 7 p.
  73. Sheffield, J.W., Veziroglu, T.N., Williams, A., Thermal Contact Conductance of Coated Multilayered Sheets. (1980) AIAA Paper, 7 p.
  74. Sheffield, J.W. On the accuracy of the zeroth order solution of heat conduction equation for a slab with time dependent heat transfer coefficient at the boundaries, (1975) Letter of Heat and Mass Transfer, 2 (1), pp.49-50.
Raji Sundararajan

PUBLICATIONS
Articles in refereed journals (*indicates lead author(s) and + represents students)


1) J. Shi+ (and R. Sundararajan) (2014). A new strategy of drug delivery-Electric field distribution in brain tumor due to electroporation. Journal of Purdue Undergraduate Research.
2)    Campana L., et al. (2012). Superficial disease control in melanoma patients treated with electrochemotherapy in a palliative setting. British J of Surgery.
3) Sundararajan, R.*, Xiao, F. +, Salameh, T.+, Reece, L.M., Campana, L.G.*, & Camarillo, I.G. (2012). Effective proliferation control of human cancer cells using electrical pulses. IEEE Transactions on Dielectrics and Electrical Insulation.
4) Varadarajan, G.*, Udayakumar, K., & Sundararajan, R*. (2011). Electric field analysis of breast tumor cells. International Journal of Breast Cancer. Vol. 2011 (2011), Article ID 235926.
5) Sankaranarayanan, K.*, Ramachandran, R.*, Kumar. R.+, Muralitharen, S.+, Usman, S.M.+, Sriram Kumar, M.+, Madan Kumar, V. +, Vignesh, S. +, Malini, V., Cherian, K.M., Madhivanan, S., Sankaranarayanan, K., Natarajan, A., & Sundararajan, R.* (2011). Effective Electro-Chemo-Therapy for Proliferation Control of Adult Human Mesenchymal Stem Cells. Journal of Electrostatics. 69, 267-274 (invited).
6) Sundararajan, R. (2009). Nanosecond Electroporation: Another look. Journal Molecular Biotechnology. 41, 69-82 (invited, 126 citations, 52 views).
7) Capaccio, C.+, Stoykov, N.*, Sundararajan, R.,* & Dean, D.A.* (2009). Quantifying induced electric field strength during gene transfer to the intact rat vasculature. Journal of Electrostatics. 67, 652-662 (1 citation).
8) Camarillo, I.G.*, Nichols, M.*, Zheng, M.+, Sonnenburg, D.+, & Sundararajan, R.* (2008). Electro-endocrine combination Therapy for aggressive breast tumors. Journal of Electrostatic. 66, 2008, 99-106 (invited, 5 citations).
9) Dean, D.A.*, Ramanathan, T., Machado D.*, & Sundararajan, R.* (2008).
Electrical impedance spectroscopy study of biological tissues. Journal of Electrostatics. 66, 165-177.
10) Sundararajan, R. (2008). Multistress aging of 28kV silicone rubber insulators under west and east coast conditions of USA. The Journal of Central Power Research Institute (CPRI). Vol. 4, No. 2, 125-134.
11) Parmentier, M.J.* & Sundararajan, R.* (2008). A multidisciplinary masters program in global technology and development. The Technology Interface Journal (online)/fall 2008. Vol. 9. No. 1.
12) Sundararajan, R.*, Olave, C.+, Romero, E.+, & Trepanier, B. (2007). Modified IEC 5000h multistress aging of 28kV thermoplastic elastomeric insulators. IEEE Transactions on Power Delivery. 22 (2), 1006-1012 (4 citations).
13) Sundararajan, R.*, Mohammed, A.+, Soundarajan, E.+, & Graves, J.+ (2006). Multistress accelerated aging of polymer housed surge arresters under simulated coastal Florida conditions. IEEE Transactions on Dielectrics and Electrical Insulation (DEI). 13 (1), 211-226 (17 citations).
14) Ellappan, P., + & Sundararajan, R.* (2005). A Simulation study of the electrical model of biological cells. Journal of Electrostatics. 63, 297-307 (invited, 9 citations).
15) Sundararajan, R.*, Nagabhushana, G.R.*, Kishore, N.K.*, & Soundarajan, E. + (2005). Influence of peaking capacitors in reducing rise times of high voltage nanosecond pulses. IEEE Transactions on Industrial Applications. 41 (3), 690-97 (3 citations).
16) Farzaneh, M.*, et al.*, including Sundararajan, R. (2005). Selection of station insulators with response to ice and snow-Part I: Technical context and environmental exposure. A position paper. IEEE Transactions on Power Delivery. 20 (1), 264-270.
17) Farzaneh, M.*, et al., including Sundararajan, R. (2005). Selection of station insulators with response to ice and snow-Part II: Methods of  selection and options for mitigation. A position paper. IEEE Transactions on Power Delivery. 20 (1), 264-270.
18)  Sundararajan, R.*, & Gorur, R. (2005). When birds and power lines collide. Transmission & Distribution World Magazine.
19) Chaney, A.+, & Sundararajan, R.* (2004). Simple MOSFET-based high-voltage nanosecond pulse generator. IEEE Transactions on Plasma Science. 32 (5), 1919-24 (11 citations).
20) Sundararajan, R.*, Shao, J. +, Soundarajan, E. +, Gonzales, J. +, & Chaney, A. + (2004). Performance of solid state high voltage pulsers for biological applications – A preliminary study. IEEE Transactions on Plasma Science. 32 (5), 2017-25 (10 citations).
21) Sundararajan, R.*, Mohammad, A. +, Chaipanit, N. +, Karcher, T., & Liu, Z. (2004). In service aging and degradation of 345kV EPDM transmission line insulators in a coastal environment. IEEE Transactions on Dielectrics and Electrical Insulation. 11 (2), 348-361 (34 citations).
22) Sundararajan, R.*, et al. (2004). Preventive measures to reduce bird-related power outages-Part I – Electrocution and collision. A position paper prepared by the IEEE Task Force on Bird-related outages. IEEE Transactions on Power Delivery. 19 (4), 1843-47.
23) Sundararajan, R.*, et al. (2004). Preventive measures to reduce bird-related power outages-part II – Streamer and contamination outages. A position paper prepared by the IEEE Task Force on Bird-related outages. IEEE Transactions on  Power Delivery. 19 (4), 1848-53.
24) Farzaneh, M.*, et al. (2003). Insulator icing test methods and procedure. A Position paper prepared by the IEEE Task Force on Insulator Icing Test Methods. IEEE Transactions on Power Delivery. 8 (4), 1503-1515.
25) Felix, A. +, Karady, G.G.*, & Sundararajan, R.* (2002). Linear stochastic analysis of polluted insulator leakage current. IEEE Transactions on Power Delivery. 17 (4), 1063-69 (29 citations).
26) Nowlin, R.*, Soman, S.+, & Sundararajan, R.* (2002). Synthesis modeling techniques in VHDL. Journal of Engineering Technology. pp. 44-50.
27) Felix, A. +, Karady, G.G.*, & Sundararajan, R.* (2001). Level crossing analysis of leakage current of polluted insulators. IEEE Power Engineering Review.
28) Nowlin, R.*, & Sundararajan, R.* (1999). A forward looking electronics and computer engineering technology program. IEEE Transactions on Education. 42 (2) (4 citations).
29) Nowlin, R.*, & Sundararajan, R.* (1998). A VHDL course for electronics engineering technology. Computers in Education Journal. 17-20 (invited).
30) Sundararajan, R.*, & Gorur, R.S. (1996). Role of non-soluble contaminants on the flashover voltage of porcelain insulators. IEEE  Transactions on Dielectrics and Electrical Insulation. 3 (1), 113-118.
31) Sundararajan, R.*, Sadureddy, N.R. +, & Gorur, R.S. (1995). Computer aided design of porcelain insulators under polluted conditions. IEEE Transactions on Dielectrics and Electrical Insulation. 2 (1), 121-127.
32) Sundararajan, R.*, & Gorur, R. S*. (1994). Effect of insulator profiles on dc flashover voltages under polluted conditions - A Study using a Dynamic Arc Model. IEEE Transactions on Dielectrics and Electrical Insulation. 1 (1), 124-132 (5 citations).
33) Sundararajan, R.*, & Gorur, R.S.* (1993). Dynamic Arc Modeling of Pollution Flashover of Insulators under DC Voltages. IEEE Transactions on Electrical Insulation. 28 (2), 209-18.

HighLights:


Top 20 Articles, in the Domain of Article 18821065, Since its Publication (2009)
8.  Nanosecond electroporation: another look.
Sundararajan R.
Mol Biotechnol; 2009 Jan;41(1):69-82.
Campana, LG and Sundararajan, R. Featured Interview. In Zheng E, Zhong NQ. Electrochemotherapy: an active treatment for chest wall metastases from breast cancer. Gland Surg 2012;1(3):173-175. DOI: 10.3978/j.issn.2227.

Sundararajan, R. (2014). Nanocurcumin-based electrochemotherapy for pancreatic cancer: the answer the world is looking for. Editorial. J of Nanomedicine & Biotherapeutic Discovery-June 09 2014 (Article usage: Total views-7686, HTML page views-6907, PDF downloads-779).

Conference or symposium proceedings ((* indicates lead author(s) and + represents students)


Research-related

1) Sarathi, R., Rayala, R., Vignesh, C., Praveen Kumar, and Sundararajan, R. (2015). Efficient and economical electrical therapy for pancreatic cancers. Annual Report Conference on Electrical Insulation and Dielectric Phenomena (CEIDP), Michigan, Oct 2015.
2) Raman, V., Camarillo, C., Sundararajan, R. (2015). Irreversible electroporation of aggressive triple negative breast cancer cells. CEIDP 2015.
3) Vadlamani, A., Zhuang, J., Sundararajan, R., Kolb. J., and Garner A. (2015). Temperature effects on Dielectric properties of biological cells. CEIDP 2015.
4) Guo, Y., Jiang, X., and Sundararajan, R. (2015). A dynamic model of dc arc discharge on polluted porcelain insulators at high altitudes. CEIDP 2015.
5) Marathe, M., Bhatt, N., and Sundararajan, R. (2014). A novel wireless vein finder. International Conference on Circuits, Control, Communication, and Computing (I4C-2014), Nov 2014, Bangalore, India.
6) Sarathi, R., Rayala, S., Kumar, P., and Sundararajan, R. (2014). Effective pancreatic cancer treatment using electrical pulses: an in vitro model study. Annual Report Conference on Electrical Insulation and Dielectric Phenomena (CEIDP), Des Moines, IA.
7) Sampath, B., Sivakumar, V., Sankaranarayanan, K., Camarillo, I.G., Lin, W., Natarajan, A., and Sundararajan, R. (2014). Breast cancer treatment using curcumin, the natural dielectric. CEIDP, Des Moines, IA.
8) Venuturumilli, S. and Sundararajan, R. (2014). Electric field distribution in brain tumors. CEIDP, Des Moines, IA.
9) Lin, W., Cooper, C., Camarillo, I.G., Reece, L.M., Clah, L., Natarajan, A., Campana, L.G., and Sundararajan, R. (2014). The effectiveness of electroporation-based nanocurcumin and curcumin treatments on human breast cancer cells. Proc. ESA Annual Meeting on Electrostatics, Univ. of Notre Dame, IN.
10) Venuturumilli, S., Sji, J., and Sundararajan, R. (2014). Electric field distribution study of brain tumors for various electrode geometries. Proc. ESA Annual Meeting on Electrostatics, Univ. of Notre Dame, IN.
11) Gowrishankar, S., Gowrisree, V., and Sundararajan, R. (2014). Enhancement of paddy germination and growth under high electric field. International Conference on Power, Control and Embedded Systems (ICPCES-2014), Anna University, Guindy, Chennai, India.
12) Sundararajan, R., Xiao, F., Salameh, T., Otto, K., & Camarillo, I.G. (2012). The dielectric properties of electroporated human breast cancer cells. International Conference on Properties and Applications of Dielectric Materials (ICPADM). CPRI, Bangalore, India.
13) Sada Sivam, P., et al. (2012). Electrical field analysis of pentagonal needle array electrode for electrochemotherapy applications. Annual Report Conference on Electrical Insulation and Dielectric Phenomena (CEIDP). Montreal, Canada.
14) Varadarajan, G., Kumaran, V., & Sundararajan, R. (2012). Electric field distribution of malignant breast tissue under needle electrode configuration. CEIDP. Montreal, Canada.
15) Sathiyanathan, K.V., Varadarajan, G., Kothandaraman, U. & Sundararajan, R. (2012). Microbial growth reduction in tomato juice using electrical pulses. CEIDP. Montreal, Canada.
16) Varadarajan, G., Ramakrishnan, R., & Sundararajan, R. (2012). Effective water treatment using pulsed electric field technique. Electrostatics Society of America (ESA) Annual Conference. Cambridge, Canada.
17) Varadarajan, G., Kalimuthu, K., & Sundararajan, R. (2012). High intensity electric field assisted germination of paddy. ESA Annual Conference. Cambridge, Canada.
18) Kung, W. & Sundararajan, R. (2012). Electrochemotherapy for brain tumors: Electric field distribution study. ESA Annual Conference. Cambridge, Canada.
19) McMullen, K.J., Sundararajan, R., & Fisher, T.S. (2012). Thermionic electron emission from petal-like carbon nanosheets grown on carbon fibers. International Conference on Renewable Energy Utilization, Kovai, India.
20) Sundararajan, R.*, Salameh, T.+, Camarillo, I.G., and Campana, L. (2011). Effective use of electrical pulses on cancer cells to control proliferation. 14th International Symposium on Electrets (ISE14). Montpellier, France (invited).
21) Sundararajan, R.*, Ramachandran, R., and Sankaranarayanan, K. (2011). Efficient, electrically-enhanced proliferation control of Adult Human Mesenchymal Stem Cells. 14th International Symposium on Electrets. Montpellier, France (invited).
22) Heish, M.+, Salameh, T.+, Camarillo, G. I.*, & Sundararajan, R.* (2011). Irreversible electroporation of various cancer cells. Electrostatics Society of America (ESA) Annual Conference. Ohio, USA.
23) Sundararajan, R.*, Rajendran, R. +, Shahid, S. +, Kanagaraj, S. +, Radhakrishman, S., Kathirvel, P., Sunderesan, V., Udayakumar, V., Ramachandran, R., Natarajan, A., & Sankaranarayanan, K.* (2011). Effect of irreversible Electroporation on Antiproliferation control of Fibroblasts. ESA Annual Conference. Ohio, USA.
24) Agoramurthy, P. +, & Sundararajan, R.* (2011). 3D Analysis of electric field distribution of large tumors using multiple needle electrodes. Proceedings of the ESA Annual Conference. Ohio, USA.
25) Agoramurthy, P. +, Campana, L.,* & Sundararajan, R.* (2011). Finite element modeling and analysis of human breast tissue for electrochemotherapy. Annual Report Conference on Electrical Insulation and Dielectric Phenomena (CEIDP). Cancun, Mexico.
26) Bommakanti, S. +, Campana, L.*, & Sundararajan, R.* (2011). A Simulation analysis of the multi electrode needles on electroporation efficiency of a cancer tissue. Annual Report CEIDP. Cancun, Mexico.
27) Sundararajan, R.*, et al. (2011). Irreversible electroporation of cancer cells. Annual Report CEIDP. Cancun, Mexico.
28) Sundararajan, R.*, Xiao, F. +, Salameh, T. +, Camarillo, I.G., Leary, J.F., Reece, L.M., Madhivanan, S., & Natarajan, A. (2010). Nanosecond, Low Voltage Electro-Endocrine-Therapy for Breast Cancer Treatment. Annual Report CEIDP. West Lafayette, IN, USA.
29) Sankaranarayanan, K.*, et al. (2010). The lethal pulse-viability of cancerous cell lines as a function of energy delivered. Annual Report CEIDP. West Lafayette, IN, USA.
30) Gowri Sree, V.*, Nandhini, N.A. +, Udayakumar, K., & Sundararajan, R.* (2010). Electric field analysis in tumor tissues. Annual Report CEIDP. West Lafayette, IN, USA.
31) Agoramoorthy, P. +, & Sundararajan, R.* (2010). Electric Field Distribution of Human Breast Tissue. Annual Report CEIDP. West Lafayette, IN, USA.
32) Sankaranarayana, K.*, et al. (2010). Electro-molecular therapy using adult mesenchymal stem cells. ESA Annual Conference. Charlotte, NC, USA.
33) Dykstra, C. +, Salameh, T. +, Camarillo, I.G., Xiao, F., & Sundararajan, R.* (2010). Enhanced Doxorubicin uptake in malignant breast cells using electrical pulses. ESA Annual Conference. Charlotte, NC, USA.
34) Sundararajan, R. (2010). Long term acid rain multistress performance of thermoplastic and thermoset polymeric insulators. International Conference on Information and industrial Systems (ICIIS). NITK Suratkal, India (invited).
35) Amin, M.*, & Sundararajan, R.* (2010). Performance of silicone rubber insulators under acid rain + multistress conditions. International conference on High Voltage Eng (ICHVE). New Orleans, USA (invited).
36) Sundararajan, R.*, et al. (2009). Efficient and Economical Electro-Drug Delivery. IEEE International Conference on Science & Technology for Humanity. Toronto, Canada.
37) Xiao, F.+, Salameh, T.+, Camarillo, I.G., Dykstra, C.+, Lenarduzzi N.+, Reece, L.M., Leary, J.F., Natarajan, A., & Sundararajan, R.* (2009). Electrically-enhanced chemodrug delivery to human breast cancer cell. ESA Annual Conference. Boston, USA (4 citations).
38) Gowri Sree, V.*, Udayakumar, K., & Sundararajan, R.* (2009). Pulsed-electrical field-mediated inactivation of tumor cells, ESA Annual Conference. Boston, USA.
39) Xiao, F+, & Sundararajan, R.* (2009). A simulation study of the electrode profile on electroporation efficacy. ESA Annual Conference. Boston, USA.
40) Kumar, R.+, Muralitharen, S.+, Usman, M.+, Ramachandran, R.*, Sundararajan, R.*, Madhivanan, S., Cherian, K.M., Begam, S., Guhathakurta. S., Sankaranarayanan, K.* (2009). Electrically-enhanced proliferation control in adult human mesenchymal stem cells. Annual Report CEIDP, VA, USA (1 citation).
41) Xiao, F.+, Salameh, T.+, Camarillo, I.G., Otto, K., Natarajan, A., & Sundararajan, R.* (2009). Impedance studies of electroporated human breast cancer cell. Annual Report CEIDP, Biodielectrics Session. VA, USA.
42) Sundararajan, R.* Chapman, R.+, & Nowlin, R. (2009). Realistic multistress long term aging of 28kV polymeric insulators. International Conference on Power Systems, IIT Kharagpur.
43) Zheng, M.+, Salameh, T.+, Lenarduzzi, N.+, Camarillo, I.G.*, & Sundararajan, R.* (2008). Enhanced uptake in normal and malignant cell lines using electrical pulses. ESA Annual Conference. Minneapolis, USA (7 citations).
44) Harper, J.+, Campbell, D.+, & Sundararajan, R.* (2008). A compact high voltage nanosecond pulser. ESA Annual Conference, Minneapolis, USA (1 citation).
Cited by the Air Force, in its call for proposal,
AF093-029TITLE: Short Pulse Radio Frequency (RF) Field Measurement System

45) Sundararajan, R.*, Campbell, D.+, Harper, J.+, Natham, V.+, Xiao, F.+, & Otto, K. (2008). Characterization of fruit juices treated with electric pulses. Annual Report CEIDP. Quebec City, Canada (1 citation).
46) Sundararajan, R.*, Godinez, V. +, & Amin, M.* (2008). Performance of thermoplastic elastomeric and thermoset insulators under accelerated acid rain multistress conditions. National Power Systems Conference. India.
47) Xiaoxia, G.+, Guangning, W.*, Bo, G., Liren, Z.+, Kai, Z.+, & Sundararajan, R. (2008). Insulation degradation of electric motor windings under high frequency square wave pulses. Proceedings of the IEEE EMECW. FL, USA.
48) Amin, S.+, Amin, M.*, & Sundararajan, R.* (2008). Comparison of multistress aging of thermoplastic elastomeric and silicone rubber insulators under a Pakistani environment. Annual Report CEIDP. Quebec, Canada.
49) Sonnenburg, D.+, Nichols, M.*, Zheng, M.+, Camarillo, I.G.*, & Sundararajan, R.* (2007). Electro-endocrine therapy for aggressive breast cancer tumors caused by obesity. ESA Annual Conference. IN, USA.
50) Sundararajan, R.*, Gutierrez, A.+, & Harding, G. (2007). Electrical-pulse mediated sterilization of fruit juices. ESA Annual Conference. IN, USA.
51) Godeinez, V.+, & Sundararajan, R.* (2007). Low voltage pulse-mediated sterilization of liquid food, Annual Report CEIDP, Montreal, Canada.
52) Sundararajan, R. (2007). Performance of Polymeric Arresters and Insulators under Multistress Conditions. International Conference on Polymeric Materials in Power Engineering. Bangalore, India (invited).
53)  Sundararajan, R.*, Olave, C.+, Romero, E.+, & Kannan, A.M.* (2007). Impedance Analysis of Long Term aged Thermoplastic Elastomeric Insulators. CEIDP. Montreal, Canada.
54) Dean, D.A.*, Machado, D.*, Ramanathan, T., Molina, I., & Sundararajan, R.* (2006). Electrical properties of Biological Tissues – An Impedance Spectroscopy Study, Annual Report CEIDP. Kansas City, USA.
55) Dean, D.A.*, Ramanathan, T., Machado, D., & Sundararajan, R.* (2006). Electrical Impedance Spectroscopy study of Rat Lung and other Tissues In vivo. ESA Annual Conference. University of California, Berkeley, USA.
56) Dean, D.A.*, Machado, D., & Sundararajan, R.* (2006). Electrical properties of biological tissues due to Electroporation - In vivo. ESA Annual Conference. University of California, Berkeley, USA.
57) Sundararajan, R.*, Kannan, A.M., Romero, E.+, Godinez, V.+, & Molina, I. (2006). Characterization of Aging and Degradation of 28kV Polymeric Insulators using Electrical Impedance Spectroscopy. Annual Report CEIDP. Kansas City, USA (2 citations).
58) Sundararajan, R.*, Olave, C.+, Molina, I., & Kannan, A.M. (2006). Very Long Term Performance of TPE Insulators under Slightly Modified IEC 61109 Multistress Conditions. INSUCON. Birmingham, UK.
59) Curd, T.+, Vernon, B.*, Pauken, C., & Sundararajan, R.* (2005). Optimization of Electroporation Parameters for Human Ovarian Cancer Cell. ESA Annual Conference. University of Alberta, Edmonton, Canada.
60) Capaccio, C.+, Stoykov, N.*, Sundararajan, R., & Dean, D.A.* (2005). Electric Field Distribution and Nuclear Transport in Vasculature due to Electroporation: A Mathematical Modeling and Analysis. ESA Annual Conference. University of Alberta, Edmonton, Canada.
61) Capaccio, C.+, Stoykov, N., Cortes, F., Sundararajan, R.*, & Dean, D.A.* (2005). Parametric Analysis of Electrical Field Distribution of Rat Vasculature using Finite Element Time domain Technique. FEMLAB Conference 2005. Boston, USA (1 citation).
62) Mitchell, W. +, & Sundararajan, R. (2005). Electric Field Distribution in Biological Tissues for Various Electrode Configurations-A FEMLAB Study. FEMLAB Conference 2005. Boston, MA, USA.
63) Olave, C.+, Molina, I., & Sundararajan, R.* (2005). Influence of Acid Rain+Multistress Conditions on the long term performance of 28kV Polymeric Insulators. Annual Report CEIDP. Nashville, USA (1 citation).
64) Olave, C.+, Romero, E.+, Sundararajan, R.*, & Trepanier, B. (2005). 5000h Aging of 28kV TPE Insulators. IEEE PES Annual Meeting. USA.
65)  Graves, J.+, & Sundararajan, R. (2004). Electric Field Simulation of Biological Cells. Proceedings, ESA Annual Conference, Rochester. USA.
66)  Ellappan, P.+, & Sundararajan, R. (2004). Simulation Study of Electrical Modeling of Biological Cells. ESA Annual Conference, Rochester. USA.
67) Venkatanarayanan, S.+, Jackson, E.+, Olave, C.+, Brignone, G., Sundararajan, R.*, & Trepanier, B. (2004). Performance of Thermoplastic Elastomeric Insulators under IEC 5000h Multistress Conditions. Annual Report CEIDP. Colorado, USA (1 citation).
68) Soundarajan, E.+, Jackson, E.+, & Sundararajan, R.* (2004). A Realistic Multistress Aging/Ranking Test for High Voltage Outdoor Polymeric Insulators. Annual Report CEIDP. Colorado, USA.
69) Liu, Z., Sundararajan, R.*, Mohammed A.+, & Graves, J.+ (2004). SEM and FTIR Analysis of Field Aged vs. Laboratory Aged Polymeric Surge Arresters. Microscopy/Microanalysis Conference. Savannah, GA.
70) Sundararajan, R.*, Soundarajan, E.+, Shao, J.+, Gonzales, J.+, & Karady, G. (2003). Nanosecond MOSFET High Voltage Pulsers for Biological Applications – a Simulation Study. IEEE IAS/ESA Joint Meet. AR, USA.
71) Sundararajan, R.*, Nagabhushana, G.R., Kishore, N.K.*, & Soundarajan, E.+ (2003). Influence of Peaking Capacitor in Reducing Rise Times of High Voltage Nanosecond Pulses. IEEE IAS/ESA Joint Meet. AR, USA.
72) Sundararajan, R.*, Mohammed, A.+, Soundarajan, E.+, & Graves, J.+ (2003). Field and Lab Aging of EP Compound Arresters. Annual Report CEIDP. Albuquerque, NM, USA.
73) Mohammed, A.+, & Sundararajan, R. (2003). Investigation of Breakdown of an EPSB Polymeric Arrester Based on the Life Estimation using a Multiple Regression Model. Annual Report CEIDP. NM, USA.
74) Soundarajan, E.+, Jackson, E.+, King, A.+, & Sundararajan, R.* (2003). Performance of Novel High Voltage Outdoor Thermoplastic Elastomeric Insulators. Annual Report CEIDP. Albuquerque, NM, USA.
75)  Sundararajan, R.*, Graves, J.+, Mohammed, A.+, & Baker, A. (2003). Performance Evaluation of Polymeric Insulators in the Lab and Field. Power Engineering Society (PES) Annual Conference Proceedings. USA.
76)  Rattanakhongviput, C.+, Mohammed, A.+, Soundarajan, E.+, & Sundararajan, R*. (2002). Surface Analysis of Polymeric Surge Arresters under Coastal Florida Conditions. Annual Report CEIDP. Cancun, Mexico.
77)  Chaipanit, N.+, Rattanakhongviput, C.+, Mohammed, A.+, Graves, J.+, & Sundararajan, R.* (2002). Field Aging of EPDM Transmission Line Insulator Surfaces. North American Power Symposium (NAPS). USA.
78) Chaipanit, N.+, Rattanakhongviput, C.+, & Sundararajan, R.* (2001). Accelerated Multistress Aging of Polymeric Insulators under San Francisco Coastal Environment. Annual Report CEIDP. Kitchener, Canada (7 citations).
79) Sundararajan, R.*, Pelletier, C.+, Chapaman, R.+, & Nowlin, R. (2001). Accelerated Multistress Aging of Polymeric Insulators – A Case Study: Detroit. International Symposium on High Voltage engineering (ISH). Bangalore, India.
80) Sundararajan, R.+, Pelletier, C.+, Chapman, R.+, Pollock, T.+, Nowlin, R., & Baker, A. (2000). Multistress Aging of Polymeric Insulators. Annual Report CEIDP. Victoria, BC, Canada (2 citations).
81) Sundararajan, R.*, Sundhar, S., & Asokan, T. (1999). Electrohydrodynamics of Water Droplets on Polymer Surfaces. IEEE Conference on Industrial Applications Society. Phoenix, AZ, USA (4 citations).
82) Pollock, T.+, Pelletier, C.+, Chapman, R.+, Sundararajan, R.*, Nowlin, R., Mendez, R., & Baker, A. (1999). Performance of Polymeric insulators under Multistress Conditions. Annual Report CEIDP. Austin, TX, USA (7 citations).
83) Karady, G.*, Amarh, F.+, & Sundararajan, R. (1999). Dynamic Modeling of AC Insulator Flashover Characteristics. International Symposium on High Voltage Engineering (ISH). UK (5 citations).
84) Pollock, T.+, Sundararajan, R.*, Nowlin, R., Thomas, K., & Lynch, M. (1998). Analysis of Polymeric Insulators. Annual Report CEIDP. USA.
85) Sundararajan, R.*, Madhavan, S.+, Lynch, M., & Sundhar, S. (1997). Surface Properties of Artificially Contaminated Polymeric Cable Terminations. Annual Report CEIDP. USA (1 citation).
86) Sundararajan, R.*, Nowlin, R. (1996). Effect of High Altitude on the Flashover Voltage of Contaminated Insulators. Annual Report CEIDP. USA (13 citations).
87) Sundararajan, R. (1996). A Computational Study of Flashover Voltage of Iced Insulators. 58th American Power Conference. Chicago, USA.
88) Sundararajan, R. (1995). Preliminary Theoretical Study on the Flashover Voltage of Polymeric Insulators. Annual Report CEIDP. USA.
89) Sundararajan, R., & Gorur, R.* (1994). Influence of Inert Particles on the Pollution Flashover Voltage of Porcelain Insulators. Annual Report CEIDP. USA.
90) Sundararajan, R., & Gorur, R.* (1993). Study of Pollution Performance of DC Station Post Insulators Using a Dynamic Arc Model. Annual report CEIDP. USA (1 citation).
91) Sundararajan, R.*, & Gorur, R. (1992). Influence of Profiles on DC Insulator Performance Under Polluted Conditions. Annual Report CEIDP, Canada.
92) Sundararajan, R., * & Gorur, R. (1991). Dynamic Modeling of Flashover on Dielectric Surfaces. IEEE International Conference on Properties and Applications of Dielectric Materials. Tokyo, Japan.
93) Sundararajan, R., & Gorur, R. (1990). Dynamic Arc Modeling of DC Flashover Under Contaminated Conditions. Annual Report CEIDP, USA.
94) Ravindra, G.S., Rajput, C., Sundararajan, R.*, Kishore, N.K.*, & Nagabhushana, G.R.* (1989). Lightning Protection of a Nose Radome. International Conference on Electromagnetic Interference and Compatibility (INCEMIC). Bangalore, India.
95) Kishore, N.K.,* Sundararajan, R.,* & Nagabhushana, G.R. (1989). Ground Potentials and Currents Due to Lightning Strokes. INCEMIC. Bangalore, India.

Learning-Related

96) Foreman, C., Halim, K., and Sundararajan, R. (2014). The future of coal. ASEE, Indianapolis, IN.

97) Turner, M., Foreman, C., and Sundararajan, R. (2014). Computer simulation tools to enhance undergraduate power systems education. ASEE, Indianapolis, IN.
98) Koch, D.*, & Sundararajan, R. (2010). Energy practices in residential buildings: A global look. In Proceedings of the American Society for Engineering Education (ASEE) Annual Conference and Exposition.
99) Weir, E.* + , & Sundararajan, R. (2010). Detroit’s rise to glory. Hawaii International Conference on Social Sciences. Hawaii, USA.
100) Sundararajan, R.*, Dangelo, D., Kishore, N.K., Mogilisetti, H., Somasundaram, S.+, & Umadevi, S. (2008). Electrical Engineering education in India: Another Look. In Proceedings of the ASEE Annual Conference and Exposition.
101) Dangelo, D.*, Campbell, D.+, Harper, J.+, & Sundararajan, R.* (2008). Technical knowledge transfer for low-cost buck-boost converters. In Proceedings of the ASEE Annual Conference and Exposition.
102)  Kulatunga, N.A.*, Persson, E.*, & Sundararajan, R. (2008). Energy saving potential and characteristics of motors for consumer appliances. In Proceedings of the IEEE EIC/EME Conference. TN, USA.
103) Persson, E.*, Kulatunga, A.*, & Sundararajan, R. (2007). Challenges of applying variable speed motor drives for consumer appliances. In Proceedings of the IEEE EIC/EME Conference. TN, USA.
104) Harris, L.*, Sundararajan, R.*, Machada, D.*, & Dean, D.A.* (2006). Non-viral Gene therapy Education for Lung Diseases through Multimedia. In Proceedings of the ASEE Annual Conference and Exposition.
105) Dangelo, D.*, Macia, N., & Sundararajan, R. (2006). A New Approach to Simulating Factory Control System Problems through a PC and Four Microcontrollers. In Proceedings of the ASEE Annual Conference and Exposition.
106) Parmentier, M.J.*, Sundararajan, R.*, Haritha M., Kishore, N.K., & Umadevi, S. (2006). Engineering Education, Development, and the Digital Divide: Basis for a comparison of India and Latin America. In Proceedings of the ASEE Annual Conference and Exposition.
107) Rogers, B.*, Henderson, M.* Roberts, C., Grondin, R., Danielson, S. & Sundararajan, R. (2006). Using a Wind Power Assessment project on the Hopi Reservation as a problem-Based Learning Experience for Undergrad and Graduate Students. In Proceedings of the ASEE Annual Conference and Exposition.
108) Sundararajan, R.*, Kishore, N.K., & Parmentier, M.J.* (2006). A Preliminary Model Curriculum For The Global Engineer. 5th ASEE Global Colloquium on Engineering Education. Brazil.
109) Parmentier, M.J.,* Sundararajan, R.*, Kishore, N.K., Mogilisetti, H., & Umadevi, S. (2006). Engineering Education, Development, and the Digital Divide: Basis For A Comparison Of India And Latin America . 5th ASEE Global Colloquium on Engineering Education. Brazil.
110) Parmentier, M.J.*, Sundararajan, R.*, & Macia, N. (2006). A Model Engineering Curriculum For Local Development In Latin America . 5th ASEE Global Colloquium on Engineering Education. Brazil.
111) Dangelo, D.* +, Sundararajan, R., & Macia, N. (2006). A Novel approach to simulating factory control system problems through a PC and four Microcontrollers. 5th ASEE Global Colloquium on Engineering Education. Brazil.
112)  Parmentier M.J.*, & Sundararajan, R. (2005). Designing Interdisciplinary Graduate Education in Technology and the Social Sciences. In ASEE Annual Conference and Exposition.
113) Tamizhmani, G.*, Rogers, B., & Sundararajan, R. (2004). A Multidisciplinary course on Fuel Cells: Their Science and Engineering. In ASEE Annual Conference and Exposition.
114) Sundararajan, R., Rogers, B., & Tamizhmani, G.* (2004). A Practice-Based Multidisciplinary Fuel Cell Course. In World Congress for Education. Brazil.
115) Rogers, B., Tamizhmani, G.*, Sundararajan, R. & Danielson, S. (2003). An Innovative Fuel Cell Theory, Testing, and Manufacturing Course. American Society of Mechanical Engineering. USA.
116) Sundararajan, R. (2003). A Power Electronics Course for Electronics Engineering Technology. NSF-ONR Sponsored Faulty Workshop Proceedings. ASU, Tempe, AZ, USA.
117) Sundararajan, R.*, & Chowdhury, F.* (2001). Incorporating Research into Undergraduate Courses: A Case Study. In ASEE GSW. Texas, USA.
118)  Nowlin, R.*, Gao, Q.+, & Sundararajan, R. (2000). Building Interactive Tutorials Using Visual Basic. In ASEE Annual Conference and Exposition.
119) Lipari, C.*, Sisterna, C.+, Sundararajan, R. & Nowlin, R. (1999). VHDL Modeling & Synthesis in the Laboratory. In ASEE Annual Conference and Exposition (Nominated for Best paper award).
120) Nowlin, R.*, Soman, S.+, & Sundararajan, R. (1998). Synthesis Modeling Techniques in VHDL. In ASEE Annual Conference and Exposition.
121) Nowlin, R.*, & Sundararajan, R. (1997). A VHDL Course for Electronics Engineering Technology. In ASEE Annual Conference and Exposition.
122) Nowlin, R.*, & Sundararajan, R.* (1996). The State of Electronics and Computer Engineering Technology at Arizona State University. ASEE-PSW Annual Conference. San Jose, USA.

Conference summaries or abstracts (100% with students)
1) Sundararajan, R.*, et al.(2008). Enhanced tamoxifen uptake for breast cancer treatment using electroporation. MedChem India. Bangalore, India.
2) Sundararajan, R.*, Gonzales, J.+, & Shao, J.+ (2003). Solid state high voltage pulsers for biological applications - A preliminary study. ElectroMed, TX.
3) Sundararajan, R.*, & Gonzales, J+. (2003). Design and building of high voltage nanosecond pulse generators for biological applications. IEEE IAS/ESA Joint Meeting, Little Rock, AR

Books


Sundararajan, R. (2014). Electroporation-based Cancer Therapies: Basic to Clinical Applications. Woodhead Publishing (Editor and author/coauthor of 9/12 articles).

Invited Chapters in books


1) Camarillo, I.G., Xiao, F.+, Natarajan, A. & Sundararajan, R*. (2013). Electrically-enhanced Tamoxifen delivery for breast cancer treatments. In Tamoxifen: Concepts and cancer: New Paradigms. Ed. R. Mello. Nova Science Publishers, Inc., NY, USA.
2) Natarajan, A.*, Campana, L., & Sundararajan, R.* (2012). Electrically-enhanced delivery of immune particles for breast cancer therapy, in Antibody-mediated (mAB) Drug Delivery Systems (DDS): Concepts, Technology, and Applications, John Wiley and Sons.
3) Natarajan, A.*, Sundararajan, R., & DeNardo, S. (2008). Magnetic nanoparticles for Cancer imaging and Therapy, in Magnetic Nanomaterials. Edited by S.S.R. Kumar, Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim, 2009, Chapter, 6, pp. 209-258 (Nanomaterials for  the Life Sciences Vol. 4).
4) Sundararajan, R. (2008). Nano-Electroporation: A First Look. In Electroporation Protocols: Experimental and Clinical Medicine. Ed. Shulin Li, Methods in Molecular Biology 423, Chapter 7, 109 - 130, Humana Press, New Jersey.
5) Sundararajan, R.*, Peterson, E.*, & Nowlin, R. (2007). Attenuators.  In Wiley Encyclopedia of Electrical & Electronics Engineering, Wiley & Sons, New York.
6) Sundararajan, R.*, Peterson, E.*, & Nowlin, R. (1999). Attenuators. Wiley Encyclopedia of Electrical & Electronics Engineering, 2, 17 - 45, John Wiley & Sons, New York.

Government, University, Industrial Reports and Standards


1) High frequency fuse characteristics, American Electric Power Company (AEP), Ohio, Aug 2008.
2) 5000h Aging of TPE insulators under modified IEC 61109 conditions – GLP Hi-Tech, Canada, 2005.
3) Bird-related outages, EPRI, 2003.
4)    Multistress aging of Polymeric Insulators in various in-service conditions. Final Report, NSF, 2002.
5)    Investigation of long Term Electrical Performance of Polymeric Insulators under Multistress Environments, Final Report, NSF, May 1999.
IEEE Standards:
1) IEEE Std 1651 - Guidelines for Reducing Bird-related outages (2011). Sundararajan, R. (Chair of the Task Force and Principal Author), et al. IEEE Press, NJ, USA.
2) IEEE Std 957 - Guidelines for Reducing Bird Related Outages (2005). IEEE press. Sundararajan, R. (Chair of the Task Force and Principal Author), et al. IEEE press, NJ, USA.
3) IEEE Std 1067 - Guide for in-service use, care, maintenance, and testing of conductive clothing for use on voltages up to 765kV ac and ±750kV dc (2003). IEEE Press. Schweitzer, L, et al.
4) IEEE Std 1783 - Guidelines for test methods and procedures to evaluate the electrical performance of insulators in freezing conditions (2009). IEEE press. Farzaneh, M. et al.

Kevin Taylor

Articles

  1. Taylor, K.D.*, Thomson, K & Wilkinson, D. (2005). Project Lead the Way®: Teaching Technology in U.S. High Schools [CDROM: 18.pdf]  GCETE 2005 – Global Congress on Engineering and Technology Education.  Santos, Brazil.
  2. Mironovova, E., Taylor, K., Walekova, G.  (2004).  On-line international Internet meetings on professional issues [CDROM: F:\ – 4 pages]  Proceedings of ICL 2004.  International Conference on Interactive Computer Aided Learning, Villach, Austria   ISBN: 3-89958-089-3.
  3. Taylor, K.D.*, Denton, J.P. & Perusich, K.A. (2004). A distance education course with both lecture and laboratory Components [CDROM: F:\Proceedings\index.htm – 6 pages].  iCEER 2004 International Conference on Engineering Education.  iNEER Conference on Engineering Education and Research, Olomouc, Czech Republic.
  4. Taylor, K.* & Mironovová E. (2002). An update on a US-Slovak collaboration [CDROM: \html\Papers\O119.pdf – 3 pages]. ICEE 2002 International Conference on Engineering Education.  International Conference on Engineering Education, Manchester,UK.
  5. Kubik, S.* & Taylor, K. (2001). Distance education at Purdue University – School of Technology.  Schola Conference Proceedings (pp. 170-174).  Trnava, Slovakia.
  6. Taylor. K. (2001).  International collaborations: Barriers and benefits.  Co-Mat-Tech Conference Proceedings (pp. 630-635). Trnava, Slovakia.
  7. Taylor, K.* & Mironovová E. (2001). Using technical English in an international collaboration [CDROM:\papers\212.pdf – 4 pages].   ICEE 2001 Annual Conference Proceedings.  International Conference on Engineering Education, Oslo, Norway.
  8. Mironovová E.* & Taylor, K. (2001). Multimedia in engineering information transfer within international student collaboration.  Proceedings of the 2nd International DETECH Workshop (pp.199-202), Maribor, Slovenia.
  9. Taylor, K.* & Mironovová E. (2000). A model for an international collaborative student experience.   2nd Global Congress on Engineering Education Proceedings (pp. 323-325). Wismar, Germany: UNESCO International Centre for Engineering Education.
  10. Homkes* R., Morales, C., Taylor, K., & Foster, G. (2000). Implementing a VISION for the future of engineering and technology education. 2nd Global Congress on Engineering Education Proceedings (pp. 226-230). Wismar, Germany: UNESCO International Centre for Engineering Education.

Manuals

  1. Taylor, K., O’Connor, T., Herrick, R. (2003).  Lab Manual to Accompany DC/AC Circuit: Principles and Applications.  Clifton Park, NY: Thomson Delmar Learning
Xiaoming Wang

Publications:

http://scholar.google.com/citations?user=MwIhyREAAAAJ&hl=en

Presentations:

Invited presentation to 53rd annual conference for metallurgists, Vancouver, 2014

Presentation to NADCA conference, Milwaukee, 2014

Invited presentation to 54th annual conference for metallurgists, Toronto, 2015 (coming in September)

Presentation to Ti-2015 by TMS, San Diego, 2015 (coming in September)

Haiyan (Henry) Zhang

Refereed Journal Papers:

(1) Wan, Y., Zhang, H. H., French, R. M. (2015). Adjustable Fractional Order Adaptive Control on Single-Delay Regenerative Machining Chatter, Journal of Fractional Calculus and Applications, 6(1), 185-207
(2) Zhang, Z., & Zhang, H. H. (2014). Viscoelastic Parameter Identification Based Structure-thermal Analysis of Rubber Bushing, Global Journal of Researches in Engineering, 14(3), ??
(3) Zhang, Z., Wu, P., & Zhang, H. H. (2014). Contact Stress Analysis of Interference Fit between V-band Clamp and Piping Systems, International Journal of Engineering and Innovation, 4(3), ??
(4) Zhang Z., Wu, P., Zhang, H. H. (2014). Mechanism and Effect of Mallet Tapping on Contact Stress Distribution between V-band Clamp and Piping Systems, International Journal of Industrial Engineering and Management, 5(2), ??
(5) Du, J., Wang, S., Zhang, H. H. (2013). Layered Clustering Multi-fault Diagnosis for Hydraulic Piston Pump, Mechanical Systems and Signal Processing, 36(2), 487-504.
(6) Liang, R., Ye, W., Zhang, H. H., & Yang, Q. (2012). The Thermal Error Optimization Models for CNC Machine Tools, International Journal of Advanced Manufacturing Technology, December, 63(9), 1167-1176.
(7) Ligata, H., & Zhang, H. H. (2012). Geometric Definition and Contact Analysis of Spherical Involute Straight Bevel Gears, International Journal of Industrial Engineering & Production Research (IJIEPR), 23(2), 101 – 111. 
(8) McHugh, R., & Zhang, H. H. (2011). Virtual Prototyping of Mechatronics for 21st Century Engineering and Technology, International Journal of Engineering Research & Innovation, 3(2), 69–75.
(9) Zhang, H. (2011). Machining Chatter Suppression via Lyapunov Stability Based Model Reference Adaptive Control, International Journal on Intelligent Technologies and Engineering Systems, 1(1), 39–47.
(10) Wan, Y., Zhang, H., & French, M. (2011). Fractional Order PID Design for Nonlinear Motion Control Based on Adept 550 Robot, International Journal of Modern Engineering, 12(1), 11–19.
(11) Ligata, H., & Zhang, H. (2011). Overview and Design of Near-net Formed Spherical Involute Straight Bevel Gears, International Journal of Modern Engineering, 11(2), 47–53.
(12) Zhang, H. (2010). PID Controller Design for A Nonlinear Motion Control Based on Modeling the Dynamics of Adept 550 Robot, International Journal of Industrial Engineering and Management, 1(1), 19–27.
(13) Zhang, H., & Ni, J. (2010). Internal Energy Based Analysis on Mechanism of Spindle Speed Variation for Regenerative Chatter Control, Journal of Vibration and Control, 16(2), 281–301.
(14) Zhang, H., Jackson, M. J., & Ni, J. (2009). Stability Analysis on Spindle Speed Variation Method for Machining Chatter Suppression, International Journal of Machining and Machinability of Materials – Special Issue on ‘Next Generation Grinding Wheels’, 5(1), 107 – 128.
(15) Zhang, H., Jackson, M. J., & Ni, J. (2009). Machining Stability Based on Phase Difference and Its Sensitivity, Journal of Manufacturing Technology Research, 1(1/2), 1–20.
(16) Kasparian, V. S., Batur, C., & Zhang, H., Joseph Padovan (1994). Davidon Least Squares Based Learning Algorithm for Feedforward Neural Networks, International Journal of Neural Networks, 7(4), 661–670.
(17) Lin, Y. J., & Zhang, H. (1993). Simplification of Manipulator Dynamic Formulations Utilizing A Dimensionless Method, Robotica, Cambridge University Press, 11(2), 139–147. 
(18) Zhang, H., Lu, Y., & Chen, Z. (1988). Wear Study of Piston and Cylinder Pole of a Piston Pump, J. of Hydraulics and Pneumatics, 1. (in Chinese)
(19) Zhang, H., Lu, Y., & Chen, Z. (1987). On Reliability of Hydraulic Pump, J. of Hydraulic Industry, 1. (in Chinese)

Refereed Conference or Symposium Proceedings Papers:

(1) Li, Y., Zhang, H. H., Liao C. (2014), (MSEC2014-4221). Geometric Parameter Optimization in Cutting Force Model for Deep-hole Drilling, Proceedings of the ASME 14th International Manufacturing Science and Engineering Conference, June 9-13, Detroit, Michigan, USA.
(2) Ashish Vora, Haotian Wu, Chuang Wang (Purdue), Yili Qian (MIT), Greg Shaver, Vahid Motevalli, Oleg Wasynczuk, Haiyan Zhang, (SAE 2014-01-1906), Development of a SIL, HIL and Vehicle Test-bench for Model-based Design and Validation of Hybrid Powertrain Control Strategies, SAE Annual Meeting 2014
(3) Haotian Wu, Haiyan Zhang, Vahid Motevalli, Yili Qian, Alexander Wolfe, (2013, April), Hybrid Electric Vehicle Powertrain Controller Development Using Hardware in the Loop Simulation, SAE 2013 World Congress and Exhibition, Detroit, Michigan, USA. 
(4) Dietz, E., Kane, M., Motevalli, V., Price, B., Richardson, J., Schmidt, J., & Zhang, H. (alphabetical order) (2011, April). Application of Electric Vehicle System Design to Grand Prix EV, SAE 2011 World Congress and Exhibition, Detroit, Michigan, USA.
(5) Zhang, H. (2010, December). Model Reference Adaptive Controller Design for Machining Chatter Control, International Conference on Manufacturing and Engineering Systems 2010, Taiwan, Republic of China.
(6) McHugh, R., & Zhang, H. (2010, April). Virtual Prototyping of Mechatronics for 21st Century Engineering and Technology, ASEE IL/IN Sectional Conference, West Lafayette, Indiana, April 9–10, 2010.
(7) Zhang, H., & Haran, T. (2009, November). A New Type of Digital Valve Actuated by Piezoelectric Ultrasonic Motor, Proceedings of the Second Workshop on Digital Fluid Power, Linz, Austria.
(8) Zhang, H. (2008, October). A Model-Based Multidisciplinary Correspondent Methodology for Design-by-Analogy, 2008 ASEE North Midwest Section Conference, Educating the Engineer of 2020, Platteville, Wisconsin, USA.
(9) Zhang, H., & Ni, J. (1995, May). Phase Difference And Its Sensitivity Analysis for a Nonlinear Machining Chatter Model, Transactions of North American Manufacturing Research Institution / Society of Manufacturing Engineers (NAMRI/SME), Vol. 23 (pp. 131–136). Houghton, Michigan, USA.
(10) Zhang, H., Ni, J., & Shi, H. (1994, May). Machining Chatter Suppression by Means of Spindle Speed Variation – Part II: The Experimental Investigation, Proceedings of the first S.M. Wu Symposium on Manufacturing Science, Society of Manufacturing Engineers, Vol. 1 (pp. 169–175). Evanston, Illinois, USA.
(18 citations, per Google Scholar, March 25, 2012)
(11) Zhang, H., Ni, J., & Shi, H. (1994, May). Machining Chatter Suppression by Means of Spindle Speed Variation – Part I: The Numerical Simulation, Proceedings of the first S.M. Wu Symposium on Manufacturing Science, Society of Manufacturing Engineers, Vol. 1 (pp. 161–167). Evanston, Illinois, USA.
(18 citations, per Google Scholar, March 25, 2012)
(12) Batur, C., Zhang, H., Padovan, J., & Kasparian, V. S. (1992, June) Davidon Least Square Based Neural Network Learning Algorithms, Proceedings of the American Control Conference. Published by IEEE. Catalog Number 92CH3072-6 (pp. 973–978). Chicago, Illinois, USA.
(4 citations, per Google Scholar, March 25, 2012)
(13) Zhang, H., Lin, Y. J., & Xu, M. (1991, Nov.). Non-dimensional Method for Modeling and Simplification of Robot Manipulator Dynamics, Proceedings of 2nd National Applied Mechanics and Robotics Conference (pp. IIB.1-1 – 1-7). Cincinnati, Ohio, USA.

Book Chapters:

(1) Zhang, H. H., Tan, L. Z., Yu, W. L., Meskouri, M. S. (2015). Mechatronic System Design for a Solar Tracker, in Research in Robotics and Mechatronics, IGI Global Publisher, Maki Habib (Ed)
(2) Zhang, H. H., Rodriguez, D., & Li, Q. (2013). Mechatronics Technology for Solar Cells, in Anwar, S., Efstathiadis, H., & Qazi, S. (Eds.), Handbook of Research on Solar Energy Systems and Technologies (Chapter 12, pp.  309 – 320). IGI Global.
(3) Zhang, H. H., Ni, J., & Jackson, M. J. (2008), Machining Stability, in Jackson, M. J., & Morrell, J. S. (Eds.), Machining with Nanomaterials (Chapter 2, pp. 39 – 65). Springer.
(4) Zhang, H. H., Ni, J., & Jackson, M. J. (2008), Machining Chatter Suppression, in Jackson, M. J., & Morrell, J. S. (Eds.), Machining with Nanomaterials (Chapter 3, pp. 67 – 96). Springer.

Patents

  1. Optical Automatic Transmission Sensor, 65018.P1.US, (in process), December, 2007.

Department: Technology Leadership & Innovation

Kari Clase

Articles

  1. Ertmer P, Freemyer S, Adedokun O, Clase KL (in press) The Grand Challenge: Helping teachers learn/teach cutting edge science via a PBL Approach. 2012 Annual Meeting of the American Educational Research Association, Vancouver, British Columbia.
  2. Clase KL, Halverson K, Heyden R (in press) Using Second Life in a formal STEM classroom to learn how to represent annotated genomes and develop a sense of community. 2012 Annual Meeting of the National Association Research in Science Teaching, Indianapolis, Indiana.
  3. Goodpaster K, Adedokun O, Kirkham L, Ertmer P, Clase K, Weaver G (in press) The impact of a professional development workshop on rural STEM teachers’ self-efficacy and biofuels knowledge. (in press). 2012 Annual Meeting of the National Association Research in Science Teaching, Indianapolis, Indiana.
  4. Adamo-Villani N, Clase KL, Heyden R, Wiecha J (in press) Constructing self-discovery learning spaces online: Scaffolding and decision making technologies. Hai-Jew, Shalin (Ed.). IGI Global Publishing.
  5. Clase KL, Gundlach E, Peleaz N (2010) Calibrated peer review for computer-assisted learning of biological research competencies Biochemistry and Molecular Biology Education, 38, 290-295.
  6. Clase KL (2009).  Engagement Through a dual credit initiative resulting in collaborative partnerships to create pre-engineering biotechnology curriculum for the K12 classroom. Proceedings of Frontiers in Education 39th Annual Conference: IEEE Education Society, October.
  7. Clase KL, Adamo-Villani N, Gooding L, Yadav A, Karpicke J, Gentry M (2009) Enhancing Creativity in Synthetic Biology with Interactive Virtual Environments. Proceedings of Frontiers in Education 39th Annual Conference: IEEE Education Society, October.
  8. Clase KL (2008) Design and implementation of an interdepartmental biotechnology program across engineering technology curricula.  Journal of Technology Studies, 34, 12-19.
  9. Clase KL, Hein PW, Pelaez NJ (2008) Demand for interdisciplinary laboratories for physiology research by undergraduate students in biosciences and biomedical engineering. Advances Physiology Education, 32, 256-260.
  10. Clase, K. L. (2007) Promoting Creativity and Innovation in an Entrepreneurial Certificate Program through Science and Technology Inquiry-Based Learning Modules for Introductory Biotechnology.  Technology Interface. Fall 2007.
  11. Clase KL, Mitchell PJ, Dorman CM, Johnson SE, Hannon K. (2000)  FGF5 stimulates expansion of connective tissue fibroblasts and inhibits skeletal muscle development in the limb.  Developmental Dynamics. 219 (3):  368-80.
  12. Steenstrup T, Clase KL, Hannon KM. (2000)  Rapid quantification of cell numbers using computer images.  Biotechniques. 28(4):  624-6, 628.
  13. Morris RC, Galicia MC, Clase KL, Elliott MS. (1999) Determination of queuosine modification system deficiencies in cultured human cells.  Mol Genet Metab. 68 (1):  56-67.
  14. Kudla AJ, Jones NC, Rosenthal RS, Arthur K, Clase KL, Olwin BB. (1998)  The FGF receptor-1 tyrosine kinase domain regulates myogenesis but is not sufficient to stimulate proliferation.  Journal of Cell Biology. 142 (1):  241-50.
  15. Hannon K, Kudla AJ, McAvoy MJ, Clase KL, Olwin BB. (1996)  Differentially expressed fibroblast growth factors regulate skeletal muscle development through autocrine and paracrine mechanisms.  Journal of Cell Biology. 132 (6):  1151-9.

Pages

College of Technology transform into Purdue Polytechnic