Publications

Research Publications and Presentations

Department: Engineering Technology

Ayhan Ince

SELECTED JOURNAL PUBLICATIONS

  1. Ince, A., Glinka, G. and Buczynski, A.,  “A Computational Modeling Technique of Elasto-Plastic Stress-Strain Response for Notched Components”, International Journal of Fatigue, Vol.62, pp. 42-52,  2014.
  2. Ince, A. and Glinka, G.,  “A Generalized Damage Parameter for Multiaxial Fatigue Life Prediction under Proportional and Non-Proportional Loadings”, International Journal of Fatigue, Vol.62, pp. 34-41,  2014.
  3. Ince, A., “Computational Fatigue Modeling of Notched Components”, Modeling and Numerical Simulation of Material Science, Vol.3, No.3A, p.14-22, 2013.
  4. Ince, A. and Glinka, G., “A Numerical Method for Elasto-Plastic Notch-Root Stress-Strain Analysis,” Journal of Strain Analysis for Engineering Design, Vol. 48, No. 4, pp. 229-224, 2013.
  5. Noban M., Jahed H., Ibrahim E. and Ince, A., “Load path sensitivity and fatigue life estimation of 30CrNiMo8HH”, International Journal of Fatigue, Vol.37, pp.123–133, 2012.
  6. Ince, A. and Glinka, G., “A modification of Morrow and Smith-Watson-Topper mean stress correction models”, Fatigue and Fracture of Engineering Materials and Structures, Vol.34, pp.854–867, 2011.
  7. Noban, M., Jahed, H., Winkler, S. and Ince, A., “Fatigue characterization and modeling of 30CrNiMo8HH under multiaxial loading”, Materials Science and Engineering A, 528 (6), 2484-2494, 2011.

SELECTED CONFERENCE PAPERS

  1. Ince, A. and Glinka G., “Innovative Computational Modeling of Multiaxial Fatigue Analysis for Ground Vehicle Notched Component”, International Conference on Fatigue Damage of Structural Materials X, Hyannis, MA, USA, 2014.
  2. Ince,  A., "A Novel Technique for Computational Multiaxial Fatigue Modeling of Notched Components", ASME 2013 Mechanical Engineering Congress & Exposition, San Diego, CA, USA, 2013.
  3. Ince, A., Glinka, G. and Buczynski, A., “A Critical Plane Damage Parameter for Multiaxial Fatigue Life under Proportional and Non-proportional Loadings”, International Conference on Fatigue Damage of Structural Materials IX, Hyannis, MA, USA, 2012.
  4. Ince,  A. and Glinka G., “Computational Modeling of Multiaxial Elasto-plastic Stress-strain Analysis for Notched Components under Non-proportional Loading”, International Conference on Fatigue Damage of Structural Materials IX, Hyannis, MA, USA, 2012.
  5. Noban, M., Jahed, H. and Ince, A., “Loading phase angle effect on multiaxial behaviour of 30CrNiMo8HH”, 9th International Conference on Multiaxial Fatigue and Fracture, ICMFF9, Parma, Italy, June 2010.
J Jacob

Textbooks

  1. Analog Integrated Circuits Applications, 2000, Prentice-Hall
  2. Power Electronics: Principles & Applications, 2002, Delmar
  3. Advanced AC Electronics:Principles & Applications, 2004, Delmar
W Leon-Salas

Selected Publications:

W. D. Leon-Salas and C. Halmen, "A RFID sensor for corrosion monitoring in concrete", IEEE Sensors Journal, vol. 16, no, 1, 2015

W. D. Leon-Salas, "Low-complexity compression for sensory systems", IEEE Trans. On Circuits and Systems-II, vol. 62, no. 4, 322-326, 2015.

H. T. Wang and W. D. Leon-Salas, W. D, "An image sensor with joint sensing and energy harvesting functions", IEEE Sensors Journal, 15(2), 902-916, 2015.

G. Moayeri, M. Benyhesan and W. D. Leon-Salas, "Energy harvesting using substrate photodiodes", IEEE Trans. on Circuits and Systems – II, 61(7), 501-505, 2014.

S. Ghosh, H. T. Wang,  and W. D. Leon-Salas, "A circuit for energy harvesting using on-chip solar cells", IEEE Trans. on Power Electronics, 29(9), 4658-4671, 2014.

F. Moiz, S. Kumar, W. D. Leon-Salas and M. Johnson, "An embedded multichannel telemetry unit for bone strain monitoring", EURASIP Journal on Embedded Systems, 14, doi:10.1186/1687-3963-2013-14, 2013

W. D. Leon-Salas, H. Rizk, C. Mo, L. Brotto., N. Weisleder,  E. Abreu and M. Brotto, "A dual mode pulsed electro-magnetic cell stimulator produces acceleration of myogenic differentiation. Recent Patents in Biotechnology. 7(1), 71-81, 2013.

C. Beard, Z. Chen, V. Kumar, Y. Lee, W. D. Leon-Salas, and P. Rao, "SAVEUS: Saving Victims in Earthquakes through Unified Systems", International Journal of Communication Networks and Distributed Systems, 10(4), 402-420, 2013.

L. Zhiqiang, M. W. Hoffman, N. Schemm, W. D. Leon-Salas and S. Balkir, "A CMOS image sensor for multi-level focal plane image decomposition", IEEE Transactions on Circuits and Systems – I, 55(9), 2561-2572, 2008.

W. D. Leon-Salas, S. Balkir, K. Sayood, N. Schemm and M. Hoffman, "A CMOS imager with focal plane compression using predictive coding", IEEE Journal of Solid-State Circuits, 42(11), 2555-2572, 2007.

W. D. Leon-Salas, S. Balkir, K. Sayood, N. Schemm and M. Hoffman, "A low-complexity circuit for on-sensor concurrent A/D conversion and compression", IEEE Sensors Journal, 7(9), 1317-1325, 2007.

D. Leon, S. Balkir, M. W. Hoffman and L. C. Perez, "Pseudo-noise sequence generator circuits for spread spectrum communications", IEE Proceedings on Circuits, Devices and Systems, 151(6), 543-550, 2004.

Anne Lucietto

PUBLICATIONS (Peer Reviewed)

Lucietto, Anne, McNally, Helen. Encouraging the Diversity of Graduate Students in Technology (Abstract Accepted) FIE Conference Paper, October, 2017. Indianapolis, IN

Lucietto, Anne. Engineering Technology vs. Engineering Students Differences in Perception and Understanding (Abstract Accepted) FIE Conference Paper. October, 2017. Indianapolis, IN

Newell, Brittany, Lucietto, Anne. Engineering Technology Students Response to Enhanced Learning Environment (Abstract Accepted) FIE Conference Paper. October, 2017. Indianapolis, IN

Lucietto, Anne. Engineering Technology Students – How do they compare to other STEM students? ASEE Conference Paper. June, 2017. Columbus, OH

Lucietto, Anne, Scott, Andrew, Connor, Kenneth, Berry, Frederick. Initial Survey of Engineering Technology Capstone Courses and Teamwork Building Using CATME. ASEE Conference Paper. June, 2017. Columbus, OH

Lucietto, Anne, Peters, Diane. Engineering Technology Graduate Students: Role Professional Societies Have In Their Formation. ASEE Conference Paper, June, 2017. Columbus, Oh.

Lucietto, Anne, Moss, Jennifer, French, Mark. Examining Engineering Technology Students: How They Perceive And Order Their Thoughts. ASEE Conference Paper, June 2017, Columbus, OH.

Hein, Gretchen, Lucietto, Anne, Faas, Daniela. A Survey of Women in Academia and the role of a Multidisciplinary Professional Society. ASEE Conference Paper, June 2017. Columbus, OH

Lucietto, Anne, Leach, Sarah.  Main Campus And Remote Campus Engineering Technology Students: How Are They Different? ASEE Conference Paper, June 2017. Columbus, OH.

Lucietto, Anne, Rameriez, Nichole. (In Review) Expanded Study of Writing Proficiency and to Learning in Engineering Technology Students. Journal of Engineering Technology, 2017.

Lucietto, Anne, Dubikovsky, Sergey. Students’ Reflections for Engineering Technology Capstone Course: Technical, Team Formation and Communication Issues, Dealing with Ambiguity. TIIJ, 2016-025, Spring/Summer 2017.

Lucietto, Anne, Moss, Jennifer, Bravo-Garcia, Jose, Lumkes, John. (In Review) Gender Differences in Workshops Designed to Increase Interest in Fluid Power. Journal of Women and Minorities in Science and Engineering. Spring/Summer 2017.

Lucietto, Anne. Who is the Engineering Technology Graduate and Where Do They Go? IEEE-Frontiers In Education Conference Paper, October 2016. Erie, PA

Lucietto, Anne. Identity of an Engineering Technology Graduate, ASEE Conference Paper, June 2016. New Orleans, LA.

Lucietto, Anne, Efendy, Eddy. WIP - Systematic Review of Engineering Technology Education Literature, ASEE Conference Paper, June 2016. New Orleans, LA

Peters, D.L., Lucietto, A.M. A Survey of Types of Industry-Academia Collaboration, ASEE Conference Paper, June 2016. New Orleans, LA

Hein, Gretchen, Faas, Daniela, Lucietto, Anne, Nagle, Jacqueline, Peters, Diane, Reck, Rebecca, Verstraete, Mary. The Changing Role of Professional Societies for Academics, ASEE Conference Paper, June 2016. New Orleans, LA

Lucietto, Anne, Rameriez, Nichole. Writing Proficiency in Engineering Technology Students and Skill Development in the Classroom, ASEE Conference Paper, June 2015, Seattle, WA.

Lucietto, Anne, Peters, Diane. How Professional Society Membership is Affected by Returning Student Status, ASEE Conference Paper, June 2015, Seattle, WA.

Donaldson, Shirl, Lucietto, Anne, Critical Thinking: Is that going to be on the test?, ASEE Conference Paper, June 2015, Seattle, WA.

Gibson, KD, TJ Benjamin, BRK Chapin, AM Lucietto, and MM Adams.  (2014)  Impact of a study abroad course on students from 1862 and 1994 land-grant institutions.  NACTA J.

Gibson K. D., Kevin, Benjamin, Tamara J., Chapin, Bridgett R. K., Oseto, Christian Y., Lucietto, Anne M. (2014) Engaging Undergraduate Students from Two Institutions in a  Multicultural Synchronously Taught Agriculture Course. NACTA Journal: March 2014.

Yoon, S. Y., Dyehouse, M., Lucietto, A., Diefes-Dux, H., & Capobianco, B. (2014). The effects of integrated science, technology, and engineering education on elementary students’ knowledge and identity development. School Science and Mathematics Journal: Special Issue on Integrated STEM Education.

Dyehouse, M., Yoon, S. Y., Lucietto, A., & Diefes-Dux, H. (2012). The effects of an engineering teacher professional development on elementary students’ science/engineering content knowledge and engineering identity. Proceedings of the 2nd P-12 Engineering and Design Education Research Summit, Washington, DC.

Yoon, S. Y., Lucietto, A., Gajdzki, E. A., & Strobel, J. (2012). Technology Enhanced Sustainable Aina Project (TESAP): Evaluation of 2011-12 School Year Teacher Data. West Lafayette, IN: INSPIRE, School of Engineering Education, Purdue University.

Diefes_Dux, H., Dyehouse, M., Yoon, S. Y., & Lucietto, A. (March, 2012). Examining student learning of science through engineering and engineering design (Paper set; Presider: B. Capobianco). National Association for Research in Science Teaching (NARST) 2012 Annual Conference, Indianapolis, IN.

 

PRESENTATIONS

Lucietto, A., “Engineering Technology Students – Do we really know who they are? (2017). Indiana STEM Education Conference, West Lafayette, IN.                                            

Reck, R., Lucietto, A., Kelly, J., “Where should I publish my research?” (2016). SWE National Conference, Philadelphia, PA.                                                                           

Lucietto, A., Peters, D., Reck, R., Pettit, S., “Entering Academia after a Career in Industry” (2016). SWE National Conference, Philadelphia, PA.                                                                           

Lucietto, A., “Engineering Technology Graduate Identity” (2016). Purdue Polytechnic Convocations, West Lafayette, IN.

Lucietto, A., “What is Engineering Technology? A Review of Engineering Education” (2016).  SWE Region H Conference, Plattville, WI.                                                                                    

Lucietto, A., “Undergraduate Research – Is That For Me?” (2016). SWE Region H Conference, Plattville, WI.                                                                                           

Peters, D., Lucietto, A., Pettit, S., “Pursuing an Academic Career after Industry Experience” (2015). SWE National Conference, Nashville, TN                                                                                             

Lucietto, A., “Achieving Student Engagement in Course Materials” (2015). Faculty Summer Institute, Champaign, IL.

Lucietto, A., Donaldson, S., “Critical Thinking: Is that on the test?” (2015) Purdue Polytechnic Convocations, West Lafayette, IN.

Lucietto, A., Peters, D., Vitale, E., “Networking in Academic Settings” (2014). SWE National Conference, Los Angeles, CA.

V. Chemistruck, A. Lucietto, D. Peters, C. Witzenburg. “Where Do I Go Now: Graduate School or Industry?”(2013). SWE Regional Conference – Minneapolis, MN, February, 2013

 

 

 

 

Jan Lugowski

Published journal articles

  1. Lugowski, J. (1988). Harmonic-Drive-Getriebe selbst bauen  [How to Build a Harmonic Drive]. Werkstatt und Betrieb 121, No. 2, pages 109-111.
  2. Lugowski, J. (1985). Adaptives Grenzregelsystem einer Flachschleifmachine [An Adaptive Constraint Control System for a Surface Grinder]. Werkstatt und Betrieb 118, No. 4, pages 201-204.    
  3. Lugowski, J. (1992). Flow Force Compensation in a Hydraulic Valve. Sterowanie i Naped Hydrauliczny [Hydraulic power and Control], Vol. 12, No. 2, p. 22 (in Polish).
  4. Lugowski, J. (1991). Flow forces in a Spool-Type Hydraulic Valve. Sterowanie i Naped Hydrauliczny [Hydraulic power and Control], Vol. 11, No. 6, pages 15-20 (in Polish).

Reviewed conference proceedings (with presentation)

  1. Lugowski, J.T. (2003). Design Class Projects in Fluid Power. Proceedings of the American Society for Engineering Education (ASEE) – Annual Conference, June 22-25, CD-ROM - Session 3648, 10 msp. Nashville, Tennessee.
  2. Lugowski, J.T. (2003). Critical-Thinking Approach to Teaching Mechanical Engineering. Proceedings of the ASEE– Annual Conference, June 22-25, CD-ROM - Session 3449, 4 msp. Nashville, Tennessee.
  3. Lugowski, J.T. (2003). Introducing State-Of-The-Art Technology Into Fluid Power Laboratory. Proceedings of the ASEE – IL/IN Sectional Conference, April 4-5, - Session 2C, 4 msp. Valparaiso, Indiana.
  4. Lugowski*, J.T., Widmer*, S.E. (2002). Problem Based Learning of Data Acquisition and Computer-Based Control Applications in MET Courses. Proceedings of the ASEE – Annual Conference, June 16-19, CD-ROM - Session 2359, 11 msp. Montreal, Quebec.
  5. Lugowski, J.T. (2002). Development of a Competency-Based Introductory Course in Fluid Power. Proceedings of the ASEE – Annual Conference, June 16-19, CD-ROM - Session 1449, 8 msp. Montreal, Quebec.
  6. Lugowski, J.T. (2002). Good Problems for Fluid Power and Controls Courses. Proceedings of the ASEE – IL/IN Sectional Conference, April 11-12, (pages 217-221). Chicago, Illinois.
  7. Lugowski, J.T. (2001). Using Rapid Prototyping to Integrate Design into a Course. Proceedings of the ASEE – Annual Conference, June 24-27, CD-ROM - Session 2650, 11 msp. Albuquerque, New Mexico.
  8. Lugowski, J.T. (2001). Mastering a LabVIEW Program within one Lab Session. Proceedings of the ASEE – IL/IN Sectional Conference, March 29-31, 5 msp. Session S4-4. West Lafayette, Indiana.
  9. Denton*, N. L., Lugowski*, J., Knoll, J. (2000). Evaluation of an Industry Project in a Freshman Course. Proceedings of the ASEE – Annual Conference, June 18-21, CD-ROM - Session 2647, 9 msp. St. Louis, Missouri.
  10. Lugowski, J. (2000). Static-Pressure Measurements in the Orifice of a Hydraulic Valve. Proceedings of the American Society of Mechanical Engineers (ASME)  - Fluids Engineering Division Summer Meeting, June 11-15, CD-ROM paper No. FEDSM2000-11124, 5 msp. Boston, Massachusetts.
  11. Lugowski, J. (1999). One of the Mysteries in Fluid Mechanics. American Society for Engineering Education (ASEE) – Annual Conference, June 20-23, CD-ROM - Session 3548, 5 msp. Charlotte, North Carolina. This paper received a “Best Session Paper Award.”
  12. Lugowski, J. (1993). The Origin of the Flow Force in Hydraulic Valves. Proceedings of the 8th International Conference on Pneumatics and Hydraulics, pages 390-395 (in German). Miskolc, Hungary.
  13. Lugowski, J. (1993). The Source of the Flow Force in Hydraulic Piston Valves. Proceedings of the 9th Conference on Hydraulics and Pneumatics, pages 373-378 (in German). Dresden, Germany.
  14. Lugowski, J. (1993). Experimental Investigations of the Origin of Flow Forces in Hydraulic Piston Valves. In N. Way (Ed.), Proceedings of the International Conference on Fluid Power—the Future for Hydraulics, Brugge, Belgium, pages 233-244. London: Mechanical Engineering Publications Ltd.
  15. Lugowski, J. (1991). Flow Force Compensation in a Hydraulic Piston Valve. Proceedings of the 22nd Midwestern Mechanics Conference, pages 503-504. Rolla: University of Missouri-Rolla.
  16. Lugowski, J. (1991). Flow Forces in a Spool-Type Hydraulic Valve. Proceedings of the 22nd Midwestern Mechanics Conference, pages 374-375. Rolla: University of Missouri-Rolla.
  17. Batsch, A.* and Lugowski*, J. (1985). Dynamic Characteristics of the Hydrostatic Bearing as a Measuring Sensor. Proceedings of the 6th Conference on Hydraulics and Pneumatics, pages 561-566 (in German). Magdeburg, Germany.
  18. Lugowski, J. (1983). A Hydraulic Piston Valve with a Strongly Compensated Flow Force. Proceedings of the 5th Conference on Hydraulics and Pneumatics, pages 602-606 (in German). Dresden, Germany.
  19. Batsch*, A. and Lugowski*, J. (1981). Flow Force in a Piston Valve. Proceedings of the 4th Conference on Hydraulics and Pneumatics, pages 498-504 (in German). Magdeburg, Germany.
  20. Lugowski, J. (1980). An Analogue Model of an Adaptive Constraint Control System of a Surface Grinder. Proceedings of the International Conference on Adaptive Control in Mechanical Engineering AC’80, pages 184-193 (in Polish). Rydzyna, Poland.
  21. Lugowski, J. (1977). An Adaptive Constraint Control (ACC) System of a Surface Grinder. Proceedings of the Mechanical Engineering Committee of the Polish Academy of Sciences, pages 31-36 (in Polish). Rzeszow, Poland.

Published abstracts

  1. Lugowski, J. (2002). Fluid Power Education at Purdue. ASME Fluid Power Systems and Technology Division Newsletter, page 9. Spring edition.
  2. Lugowski, J. (1988). A Hydrostatic Bearing. Machine Design, September 8, page 36.

Patents

  1. Batsch*, A., and Lugowski*, J. (1986). Polish patent No. 131831. Testing Equipment for the Perforating Machine. Warsaw, Poland. Patent Office.
  2. Lugowski, J. (1986). Polish patent No. 141196. A Harmonic Drive. Warsaw, Poland. Patent Office.
  3. Lugowski, J. (1985). Polish patent No. 135336. A Sealing Diaphragm for Hydraulic Control Valves. Warsaw, Poland. Patent Office.
  4. Lugowski, J. (1984). Polish patent No. 133716. A Hydrostatic Bearing. Warsaw, Poland. Patent Office.
  5. Lugowski, J. (1984). Polish patent No. 133718. A Hydrostatic Bearing. Warsaw, Poland. Patent Office.
  6. Lugowski, J. (1984). Polish patent No. 133723. A Metering Valve. Warsaw, Poland. Patent Office.
  7. Lugowski, J. (1984). Polish patent No. 133717. A Hydrodynamic Bearing. Warsaw, Poland. Patent Office.
  8. Batsch*, A., Lugowski*, J. (1981). Polish patent No. 123378. A Hydraulic Valve with a Strongly Compensated Flow Force. Warsaw, Poland. Patent Office.
  9. Batsch*, A., Oczos*, K., and Lugowski*, J. (1981). Polish patent No. 110882. Perforating Machine for Plastic Tubes. Warsaw, Poland. Patent Office.
  10. Batsch*, A., and Lugowski*, J. (1980). Polish patent No. 113308. An ACC System of a Surface Grinder. Warsaw, Poland. Patent Office.                     

International lecture

  1. Flow Force in Hydraulic Valves, Institute for Fluid Power Drives and Controls  (IFAS) at Aachen University (RWTH), Germany. Professor Lugowski presented his research of flow forces in hydraulic valves (in 2003).

Locally published instructional materials

  1. Fletcher*, R.D., Lugowski*, J.T. and Stern*, H. (2002). Fluid Power. Facilitator Guide. 159 pages. National Center of Excellence for Advanced Manufacturing Education, Sinclair Community College, Dayton, Ohio.
  2. Lugowski*, J.T., Hutzel*, W.J. and Denton, N.L. (2002). Controls And Instrumentation For Automation, MET 382 Laboratory Manual. Spring 2003 Edition, 147 pages. Mechanical Engineering Technology, Purdue University, West Lafayette, Indiana: Copymat.
  3. Lugowski, J.T. 2009. MET 334 Advanced Fluid Power Laboratory Manual. 84 pages. Mechanical Engineering Technology, Purdue University, West Lafayette, Indiana: BoilerCopyMaker.
  4. Lugowski, J.T. 2009. MET 432 Hydraulic Control Motion systems Laboratory Manual. 78 pages. Mechanical Engineering Technology, Purdue University, West Lafayette, BoilerCopyMaker.
  5. Lugowski, J.T., Widmer, S.E.(2009). MET 230L Fluid Power Laboratory Manual. 127 pages. Mechanical Engineering Technology, Purdue University, West Lafayette, IN: Learning Systems.
  6. Lugowski, J. (1992). Obrabiarki. Laboratorium [Laboratory of Machine Tools] 2nd ed. upgraded, 109 pages. Department of Mechanical Engineering, Rzeszow, Poland: Rzeszow University of Technology Press.
Brittany Newell

Publications

 

1. Book, B, Chen, J, and Irudayaraj, J. 2010. Quantification of receptor targeting aptamer binding characteristics using single-molecule spectroscopy. Biotechnology and Bioengineering 108 (5) 1222-1227.

2. Guo, C*, Book Newell, B*, Irudayaraj, J. 2011 Protein-directed reduction of graphene oxide and intracellular imaging. Chemical Communications (47) 12658–12660.

3. Panchapakesan, B, Book Newell, B. Irudayaraj, J. 2011. Gold nanoprobes for theragnostics. Nanomedicine 6(10) 1787-1811.

4. Book Newell, B, Wang, Y. and Irudayaraj J. 2012 Multifunctional gold nanorod theragnostics probed by multi-photon imaging. European Journal of Medicinal Chemistry. (48) 330-337.

5. Wang, Y. Book Newell, B. Damayanti, N.P. and Irudayaraj, J. 2012 Folic Acid Protected Silver Nanocarriers for Targeted Drug Delivery. Journal of Biomedical Nanotechnology (8) 5 751-759.

6. Newell, B, Krutz, G, Gallien, T, Harmeyer, K, Holland, M, Brune, A, and Holland, Z. Capacitance Health Sensing in Fluid Power Components. Proceedings of the 7th Annual FPNI PhD Symposium, Reggio Emilia, Italy 373-384.

7. Newell, B. Krutz, G, Holland, M, and Harmeyer, K. Sensing with Smart Polymers and Rubber Components on Vehicles to Reduce Warranty and Liability (i.e. Tires, Hoses, Seals). SAE 2013 World Congress Detroit, MI April 16-18 2013.

8. Krutz, G, Gallien, T, Newell, B, and Stewart, F. “Design and Evaluation of an Embedded Sensor in a Polymer Sealing Structure “Smart Seal”.” ASME/BATH 2013 Symposium on Fluid Power and Motion Control Sarasota, FL Oct. 6-9 2013              

9. Newell,B., Krutz, G., Steward, F., and Pascal, K. "Novel Pre-strain Method for Dielectric Electroactive Polymers." SPIE  Electroactive Polymer Actuators and Devices (EAPAD) 2016 Las Vegas, NV 15 April 2016); doi:10.1117/12.2220098

 

Patent Applications

 

1. Newell, B. A., Krutz, G. W "Electroactive actuators, systems equipped therewith, and methods of use and manufacture." (Application: January 25, 2013).                                                                                                                                        ​

2. Krutz, G., Knies, G., Mosier, K., Stwalley, R., Newell, B.. "Belt and Pulley Systems and Methods of Detecting Belt Damage." (Application: February 25, 2016).                                                                                                                                  

3. Newell, B. A., Krutz, G. W. "Electroactive Polymers, Methods of Manufacture, and Structures Formed Thereof." (PCT Application: March 10, 2016).                                                                                                                                                      

4. Newell, B. A., Krutz, G. W., Knies, G. "Hydraulic Hoses with Life-Sensing Capability and Methods Therefor." (PCT Application: March 13, 2016).

 

Jason Ostanek

Peer-reviewed Journal Publications

  • Ostanek, J., 2017, "Visualization study of vapor formation during pool boiling under modified confinement surfaces," J. Flow Visualization and Image Processing.  In Press.
  • Coleman, B., Ostanek, J., and Heinzel, J., 2016, “Reducing cell-to-cell spacing for large-format lithium ion battery modules with aluminum or PCM heat sinks under failure conditions,” Applied Energy. vol. 180.  pp. 14-27.
  • Ostanek, J., Shah, K. and Jain, A., 2016, “Measurement Sensitivity Analysis of the Transient Hot Source Technique applied to Flat and Cylindrical Samples,” J. Thermal Sci. Eng. Appl. vol. 9(1).  pp. 011002 (1-12).
  • Drake, S., Martin, M., Wetz, D., Ostanek, J., Miller, S., Heinzel, J., and Jain, A., 2015, “Heat Generation Rate Measurement in a Li-ion Cell at Large C-rates through Temperature and Heat Flux Measurements,” J. Power Sources. vol. 285, pp. 266-273.
  • Shah, K., Drake, S., Wetz, D., Ostanek, J., Miller, S., Heinzel, J., and Jain, A., 2014, “An Experimentally Validated Transient Thermal Model for Cylindrical Li-ion Cells,” J. Power Sources. vol. 271, pp. 262-268.
  • Shah, K., Drake, S., Jain, A., Wetz, D., Ostanek, J., Miller, S., and Heinzel, J., 2014, “Modeling of Steady-State Convective Cooling of Cylindrical Li-ion Cells,” J. Power Sources.vol. 258, pp. 374-381.
  • Ostanek, J., 2014, “Improving Pin-Fin Heat Transfer Predictions Using Artificial Neural Networks,” J. Turbomach. vol. 136, pp. 051010 (1-9).
  • Drake, S., Wetz, D.A., Ostanek, J., Miller, S., Heinzel, J., and Jain, A., 2013, “Measurement of Anisotropic Thermophysical Properties of Cylindrical Li-ion Cells,” J. Power Sources. vol. 252, pp. 298-304.
  • Ostanek, J. and Thole, K., 2012, “Effect of Streamwise Spacing on Periodic and Random Unsteadiness in a Bundle of Short Cylinders Confined in a Channel,” Exp. Fluids. vol. 53(6). pp. 1779-1796.
  • Ostanek, J. and Thole, K., 2012, “Wake Development in Staggered Short Cylinder Arrays within a Channel”, Exp. in Fluids. vol. 53(3).  pp. 673-697.
  • Ostanek, J. and Thole, K. A. 2012,“Flowfield Measurements in a Single Row of Low Aspect Ratio Pin-Fins,” J. Turbomach., vol. 134. pp. 051034 (1-10).
  • Ostanek, J., Thole, K., Prausa, J., and Van Suetendael, A., 2010, "Establishing a Methodology for Resolving Convective Heat Transfer From Complex Geometries," J. Turbomach., vol. 132, pp. 031014 (1-10).

 

Technical Conference Papers

  • Coleman, B., Ostanek, J., 2017, “Dynamic Heat Transfer Modeling for Shipboard Thermal Management,” ASNE Intelligent Ships Symposium.  University of Pennsylvania.  Philadelphia, PA.
  • Coleman, B., Ostanek, J., and Heinzel, J., 2016, “Thermal Management Considerations for Indirect Liquid Cooling of Cylindrical Lithium Ion Batteries,” Hypervelocity Gun Weapon System Workshop.  Johns Hopkins Applied Physics Lab.  Laurel, MD.
  • Kirsch, K., Ostanek, J., Thole, K., and Kaufman, E., 2014, “Row Removal Heat Transfer Study for Pin Fin Arrays,” International Gas Turbine and Aeroengine Congress and Exposition, Düssseldorf, Germany.  GT2014-25348.
  • Ostanek, J. and Heinzel, J., 2013.“On Optimizing Cylindrical Battery Cell Dimensions for Large-Scale Energy Storage Systems on Naval Combatants,” ASNE Electrical Machinery Technology Symposium. Villanova University.  Philadelphia, PA.
  • Ostanek, J., 2013, “Improving Pin-Fin Heat Transfer Predictions Using Artificial Neural Networks,” International Gas Turbine and Aeroengine Congress and Exposition, San Antonio, TX.  GT2013-95903.
  • Kirsch, K., Ostanek, J. and Thole, K., 2013, “Comparison of Pin Surface Heat Transfer in Arrays of Oblong and Cylindrical Pin Fins,” International Gas Turbine and Aeroengine Congress and Exposition, San Antonio, TX.  GT2013-95146.
  • Ostanek, J. and Thole, K., 2013, “Effect of Non-Uniform Spacing in Low Aspect Ratio Pin-Fin Arrays,” International Gas Turbine and Aeroengine Congress and Exposition, San Antonio, TX.  GT2013-95889.
  • Ostanek, J. and Thole, K., 2012, “Effects of Aspect Ratio and Spacing in Pin-Fin Arrays,” International Gas Turbine and Aeroengine Congress and Exposition, Denmark, GT2012-68127.
  • Ostanek, J. and Thole, K., 2011, “FlowfieldMeasurements in a Single Row of Low Aspect Ratio Pin-Fins,” International Gas Turbine and Aeroengine Congress and Exposition, Vancouver, GT2011-45757.
  • Ostanek, J., Thole, K., Prausa, J., and Van Suetendael, A., 2008, “Establishing a Methodology for Resolving Convective Heat Transfer From Complex Geometries,” International Gas Turbine and Aeroengine Congress and Exposition, Berlin, GT2008-51411.
  • Boggs, C., Borg, L., Ostanek, J., and Ahmadian, M., 2006, "Efficient Test Procedures for Characterizing MR Dampers,"  ASME IMECE Congress. Chicago, IL. ASME Paper No: 2006-13275.
Milan Rakita

Journal Papers

  1. Rakita, M., Liu, Y., Yin, F., Wang, M., Han, Q. 2013. “Ultrasonic Shot Peening”, International Journal of Computational Materials Science and Surface Engineering, Vol. 5, No. 3, pp. 189-209
  2. Liu, Z.W., Rakita, M., Han, Q., Li, J.G. 2012. “A Developed Method for Fabricating In Situ TiCp/Mg Composites by Using Quick Preheating Treatment and Ultrasonic Vibration”, Metallurgical and Materials Transactions A, Vol. 43, No. 6, pp. 2116-2124
  3. Liu, Z.W., Rakita, M., Han, Q., Li, J.G. 2011. “Microstructural Evolution of Reinforcements in the Remelting In Situ TiC/Al-12Si Composites Treated by Ultrasonic Vibrations”, Materials Research Bulletin, Vol. 46, Iss. 10, pp. 1674-1678
  4. Kakaš, D., Škorić, B., Rakita, M. 2004. “Tribological Behavior of Duplex Coating Improved by Ion Implantation”, Thin Solid Films, Vol. 459, Iss. 1-2, pp. 152-155
  5. Škorić, B., Kakaš, D., Bibić, N., Rakita, M. 2004. “Microstructural Studies of TiN Coatings Prepared by PVD and IBAD”, Surface Science, Vol. 566-568, Pt. 1, pp. 40-44
  6. Škorić, B., Kakaš, D., Rakita, M., Bibić, N., Peruško, D. 2004. “Structure, Hardness and Adhesion of TiN Coatings Deposited by PVD and IBAD on Nitrited Steels”, Vacuum, Vol. 76, Iss. 2-3, pp. 169-172

Peer Reviewed Conference Proceedings

  1. Rakita, M., Han, Q., Liu, Z. 2013. “Strain Rate as a Predictor of Hot Tearing Tendency in AZ 91 Magnesium Alloy”, AFS Transactions, Vol. 121, pp. 467-472 (Best Paper Award, Mg Division, American Foundry Society CastExpo ’13 and 117th Metalcasting Congress, April 6-9, 2013, St. Louis, Missouri, USA)
  2. Rakita, M., Han, Q. 2009. “Simulation of Solidification Defects for Prediction of Dross Formation in Aluminum 5182 Remelt Secondary Ingot”. Proceedings of the ASME International Manufacturing Science and Engineering Conference MSEC 2009 (October 4-7, 2009, West Lafayette, Indiana, USA), Vol. 1, pp. 365-372
  3. Rakita, M., Kakaš, D., Škorić, B., Tomović, M., Han, Q., Jackson, M. 2009. “S-Type Cultivator Tines Which Comply With ISO Standard: FEM Analysis of Stresses and Manufacturing Issues”. Proceedings of the ASME  International Manufacturing Science and Engineering Conference MSEC 2009 (October 4-7, 2009West Lafayette, Indiana, USA), Vol. 1, pp. 373-380
  4. Škorić, B., Kakaš, D., Rakita, M. 2005. “Some Tribological Aspects of the Duplex Coatings with Additional Ion Bombardment”, Proceedings of the ASME World Tribology Congress III (September 12-16, 2005, Washington, USA), paper WTC2005-64218, pp. 513-514
  5. Kakaš, D., Rakita, M., Škorić, B., Novakov, T., Šiljegović, M., Dobrosavljević, A., Spasojević, V., Mitrić, M., Ivković, B. 2005. “Application of IBAD for Duplex Coatings on Carburized Steel”, Proceedings of Vacuum Electron Ion Technologies VEIT (September 12-16, 2005, Sunny Beach, Bulgaria), pp. 88
  6. Kakaš, D., Novakov, T., Škorić, B., Rakita, M. “Ion Beam Surface Modification of Different Tool Steels by Krypton Implantation”, Proceedings of Vacuum Electron Ion Technologies VEIT (September 12-16, 2005,Sunny Beach, Bulgaria), pp. 41
  7. Škorić, B., Kakaš, D., Rakita, M. 2005. “Structural, Mechanical and Tribological Behavior of TiN Coatings with Subsequent Ion Implantation”, Proceedings of the 11th European Conference on Applications of Surface and Interfaces Analysis ECASIA (September 25-30, 2005, Vienna, Austria), pp. 112
  8. Škorić, B., Kakaš, D., Rakita, M. 2005. “Tribological and Microstructural Studies of TiN Coatings Prepared by PVD and IBAD”, 12th International Metallurgy-Materials Congress (September 28-October 2, 2005, Istanbul, Turkey)
  9. Škorić, B., Kakaš, D., Rakita, M. 2005. “Characteristics of Coatings Deposited by PVD and IBAD on Nitrited Steels”, 8th International Symposium Interdisciplinary Regional Research, (Szeged, Hungary)
  10. Kakaš, D., Novakov, T., Škorić, B., Rakita, M., Gregor, M. 2005. “Ion Implantation of Krypton into the Surface Layer of Tool Steels”, Proceedings of the 5th International Conference BALKANTRIB 05 (June 15-18, 2005, Kragujevac, Serbia), pp. 209
  11. Kakaš, D., Škorić, B., Novakov, T., Rakita, M., Bohne, W., Gregor, M., Nešković, N., Dobrosavljević, A. 2005. “Nanomodification of Steel Surface by Krypton”, 1st International Workshop on Nanoscience & Nanotechnology (November 15-18, 2005, Belgrade, Serbia), pp. 186
  12. Škorić, B., Kakaš, D., Rakita, M., Novakov, T. 2005. “Characterization of IBAD Coatings with Additional Ion Bombardment”, Eight TESLA Workshop: Nanoscience and Biomedicine with Ion Beams (April 18-20 2005, Belgrade, Serbia), pp. 39
  13. Rakita, M., Kakaš, D., Škorić, B., Novakov, T. 2005. “Deposition of Industrial Scale Hard Coatings by IBAD”, Eight TESLA Workshop: Nanoscience and Biomedicine with Ion Beams (April 18-20 2005, Belgrade, Serbia), pp. 38
  14. Kakaš, D., Novakov, T., Škorić, B., Rakita, M. 2005. “Modification of different steel surface layers by krypton ion implantation”, Eight TESLA Workshop: Nanoscience and Biomedicine with Ion Beams (April 18-20 2005, Belgrade, Serbia), pp. 37
  15. Škorić, B., Kakaš, D., Rakita, M. 2004. “Microstructural and Tribological Characterization of Duplex Coatings with Additional Ion Bombardment”, 14th Congress of International Federation for Heat Treatment and Surface Engineering, (October 26-28, 2004, Shanghai, China), pp. 1229
  16. Kakaš, D., Škorić, B., Rakita, M. “Influence of Additional Ion Bombardment by Nitrogen on Characteristics of Duplex Coatings”, 10th Joint Vacuum Conference, Portorož, Slovenia (September 28-October 2, 2004), pp. 47
  17. Škorić, B., Kakaš, D., Rakita, M. 2003. “Influence of Ion Implantation on Wear Behavior of Duplex Coatings”, 8th International Tribology Conference (October 8-10, 2003, Belgrade, Serbia), pp. 121
  18. Škorić, B., Kakaš, D., Bibić, N., Rakita, M. “Microstructural Studies of TiN Coatings Prepared by PVD and IBAD”, 22th European Conference on Surface Science (September 7-12, Prague, Czech Republic)
  19. Kakaš, D., Škorić, B., Rakita, M. “Tribological Behavior of Duplex Coating Improved by Ion Implantation”, 8th European Vacuum Congress (June 23-26, 2003, Berlin, Germany), pp. 158
  20. Škorić, B., Kakaš, D., Rakita, M., Bibić, N., Peruško, D. 2004. “Structure, Hardness and Adhesion of TiN Coatings Deposited by PVD and IBAD on Nitrited Steels”, International Summer School on Vacuum, Electron, and Ion Technologies VEIT 2003 (September 15-19, 2003, Varna, Bulgaria)
John Sheffield
  1. Hamad, Y.M., Hamad, T.A., Agll, A.A., Sheffield, J.W., The Hydrogen Energy Potential of Solid Waste in Libya, and its Use in the Reduction of Greenhouse Gas Emissions, Advances in Natural Science, Canadian Research & Development Center of Sciences and Cultures (In Press).
  2. Sheffield, J.W. and Hamad, Y.M., Mapping the Hydrogen Energy Potential for the State of Missouri, and its Use in the Reduction of Greenhouse Gas Emissions, Poster Presentation at World Hydrogen Energy Conference, Zaragoza, Spain, 20-22 June 2016
  3. Agll, A.A., Hamad, Y.M., Hamad, T.A., Bapat, S.G., Sheffield, J.W.,Development of design a drop-in hydrogen fueling station to support the early market build out of hydrogen infrastructure, International Journal of Hydrogen Energy (2016), 41(10), 5284-5295.
  4. Hamad, T.A., Agll, A.A., Hamad, Y.M., Bapat, S., Thomas, M., Martin, K.B., Sheffield, J.W., Study of a molten carbonate fuel cell combined heat, hydrogen and power system (2014) Energy, 75, pp. 579-588.
  5. Hamad, T.A., Agll, A.A., Hamad, Y.M., Sheffield, J.W., Solid waste as renewable source of energy: Current and future possibility in Libya (2014) Case Studies in Thermal Engineering, 14, pp. 144-152.
  6. Vaz. W., Sheffield, J.W., Preliminary Assessment of Greenhouse Gas Emissions for Atactic Polypropylene (APP) Modified Asphalt Membrane Roofs, (2014) Building and Environment, 78, pp. 95-102.
  7. Agll, A.A., Hamad, Y.M., Hamad, T.A. Sheffield, J.W., Study of energy recovery and power generation from alternative energy source, (2014) Case Studies in Thermal Engineering, 4, pp. 92-98.
  8. Hamad, Y.M., Hamad, T.A., Agll, A.A., Bapat, S.G., Bauer, C., Clum, A., Shivaprasad, N., Thomas, M., Sheffield, J., A design for hydrogen production and dispensing for northeastern United States along with its infrastructural development timeline, (2014) International Journal of Hydrogen Energy 39 (19), pp. 9943-9961.
  9. Hamad, T.A., Agll, A.A., Hamad, Y.M., Bapat, S.G., Thomas, M., Martin, K.B., Sheffield, J.W., Hydrogen production and end-uses from combined heat, hydrogen and power system by using local resources, (2014) Renewable Energy, 71, pp. 381-386.
  10. Hamad, T.A., Agll, A.A., Hamad, Y.M., Bapat, S., Thomas, M., Martin, K.B., Sheffield, J.W., Study of combined heat, hydrogen and power system based on a molten carbonate fuel cell fed by biogas produced by anaerobic digestion, (2014) Energy Conversion and Management, 81, pp. 184-191.
  11. Hamad, T.A., Agll, A.A., Hamad, Y.M., Bapat, S., Thomas, M., Martin, K.B., Sheffield, J.W., Hydrogen recovery, cleaning, compression, storage, dispensing, distribution system and End-Uses on the university campus from combined heat, hydrogen and power system, (2014) International Journal of Hydrogen Energy, 39 (2), pp. 647-653.
  12. Sheffield, J. W., Martin, K. B., Folkson, R. (2014). Electricity and hydrogen as energy vectors for transportation vehicles. In Folkson, R (Ed.), Alternative Fuels and Advanced Vechicle Technologies for Improved Environmental Performance (pp. 117-137). Woodhead Publishing Limited.

  13. Hamad, T.A., Agll, A.A., Hamad, Y.M., Bapat, S., Thomas, M., Martin, K.B., Sheffield, J.W., Study of a molten carbonate fuel cell combined heat, hydrogen and power system: End-use application, (2013) Case Studies in Thermal Engineering, 1 (1), pp. 45-50.
  14. Agll, A.A.A., Hamad, Y.M., Hamad, T.A., Thomas, M., Bapat, S., Martin, K.B., Sheffield, J.W., Study of a molten carbonate fuel cell combined heat, hydrogen and power system: Energy analysis, (2013) Applied Thermal Engineering, 59 (1-2), pp. 634-638.
  15. Hamad, Y.M., Hamad, T.M., Agll, A.A., Martin, K.B., Thomas, M., Bapat, S.G., Sheffield, J.W., Molten carbonate fuel cell combined heat, hydrogen and power systems: feedstock analysis, (2013) Energy Science and Technology, Vol. 6 (2), pp. 31-35.
  16. Mohan, V., Shah, A., Sheffield, J.W., Martin, K.B., Design of a hydrogen community, (2012) International Journal of Hydrogen Energy, 37 (2), pp. 1214-1219.
  17. Shah, A., Mohan, V., Sheffield, J.W., Martin, K.B., Solar powered residential hydrogen fueling station, (2011) International Journal of Hydrogen Energy, 36 (20), pp. 13132-13137.
  18. Cottrell, C.A., Grasman, S.E., Thomas, M., Martin, K.B., Sheffield, J.W., Strategies for stationary and portable fuel cell markets, (2011) International Journal of Hydrogen Energy, 36 (13), pp. 7969-7975.
  19. Thomas, M., Martin, K.B., Grasman, S.E., Sheffield, J.W., Arauco, E.A.A., Design layout of hydrogen research and development garage, (2011) International Journal of Hydrogen Energy, 36 (13), pp. 8017-8022.
  20. Sheffield, J.W., Koylu, U.O., A rural hydrogen transportation test bed, (2009) International Journal of Hydrogen Energy, 34 (14), pp. 6000-6004.
  21. Finney, D.L., Holcomb, F.H., Sheffield, J.W., Tupper, S.H., Hydrogen-fueled buses for DOD, (2008) Military Engineer, 100 (654), pp. 67-68.
  22. Sheffield, J.W., Energy security through hydrogen, (2007) NATO Security through Science Series C: Environmental Security, pp. 1-8. Springer (ISBN 978-1-4020-6441-8).
  23. Sheffield, J. W., Sheffield, C. (2007). In Sheffield, J.W., Sheffield, C. (Ed.), Assessment of hydrogen energy for sustainable development. Springer (ISBN 1871-4668).

  24. Sheffield, J. W., Energy Convention Groningen 2005, "UNIDO-ICHET Pilot Projects," Energy Academy Europe, Groningen, The Netherlands. (October 27, 2005).

  25. Sheffield, J. W., 2nd National Conference for Hydrogen Technologies, "UNIDO-ICHET Pilot Projects," The Centre for Research & Technology, Hellas, Thessaloniki, Greece. (October 20, 2005).

  26. Sheffield, J. W., 1st International Conference on Hydrogen Safety, "Assessment of Integrated Hydrogen Energy Systems in UNIDO-ICHET Pilot Projects," European Commission, Pisa, Italy. (September 9, 2005).

  27. Sheffield, J. W., 1st World Congress of Young Scientists on Hydrogen, "UNIDO-ICHET Programs for Hydrogen Applications and Energy Systems," Italian National Agency for New Technologies, Energy and Sustainable Economic Development, Torino, Italy. (May 19, 2005).

  28. Syed, M.T., Sherif, S.A., Veziroglu, T.N., Sheffield, J.W., Second law analysis of hydrogen liquefiers operating on the modified Collins cycle, (2001) International Journal of Energy Research, 25 (11), pp. 961-978.
  29. Sheffield, J. W., 23rd World Energy Engineering/Environmental Technology Expo/Plant & Facilities Expo, "Enhancing Energy Assessments Through Partnerships," Association of Energy Engineers, Atlanta, GA. (October 26, 2000).

  30. Romero, H., Ambriz, J.J., Ortiz, J.N., Sheffield, J.W., Joint Mexico/USA energy audits: a case study, (1999) Energy Engineering: Journal of the Association of Energy Engineering, 96 (6), pp. 17-28.
  31. Sheffield, J. W., 21th World Energy Engineering/Environmental Technology Expo/Plant & Facilities Expo, "Joint Mexico/USA Energy Audits: A Case Study," Association of Energy Engineers, Atlanta, GA. (November 5, 1998).

  32. Syed, M.T., Sherif, S.A., Vezirog̃lu, T.N., Sheffield, J.W., An economic analysis of three hydrogen liquefaction systems, (1998) International Journal of Hydrogen Energy, 23 (7), pp. 565-576.
  33. Sheffield, J. W., XVIII Seminario Nacional Sobre el Uso Racional de la Energia y Exposicion de Equipos y Servicios (ATPAE), "Energy Conservation in Manufacturing Plants of Textile Products Made from Fabrics: A Case Study," El Fideicomiso para el Ahorro de Energía Eléctrica (FIDE), Mexico DF, Mexico. (September 25, 1997).

  34. Sheffield, J. W., XVII Seminario Nacional Sobre el Uso Racional de la Energia y Exposicion de Equipos y Servicios (ATPAE), "Industrial Energy Audits," El Fideicomiso para el Ahorro de Energía Eléctrica (FIDE), Mexico D.F., Mexico. (November 28, 1996).

  35. Sheffield, J. W., 19th World Energy Engineering Congress, "A Strategic Management Approach for Energy and Waste Minimization Assessment Centers," Association of Energy Engineers, Atlanta, GA. (November 7, 1996).

  36. Sheffield, J. W., 2nd Annual Congress of the Mexican Association for Energy Economics: “Energy Transitions in Mexico, Central America and South America”, "Energy in Latin America: Present and Future," Mexican Association for Energy Economics, Mexico D.F., Mexico. (September 24, 1996).

  37. Sheffield, J. W., 1996 Annual Conference and Exposition of the American Society for Engineering Education, "Electric Demand Reduction for Industrial Plants," American Society for Engineering Education, Washington, D.C. (June 26, 1996).

  38. Chung, K.C., Benson, H.K., Sheffield, J.W., Thermal contact conductance of ceramic substrate junctions, (1995) Journal of Heat Transfer, 117 (2), pp. 508-510.
  39. Chung, Kee-Chiang, Sheffield, John W., Enhancement of thermal contact conductance of coated junctions, (1995) Journal of thermophysics and heat transfer, 9 (2), pp. 329-334.
  40. Zhang, L., Sherif, S.A., Veziroǧlu, T.N., Sheffield, J.W., Performance analysis of reciprocating magnetic liquefiers, (1994) International Journal of Hydrogen Energy, 19 (12), pp. 945-956.
  41. Gürsu, S., Sheriff, S.A., Vezirocǧlu, T.N., Sheffield, J.W., Review of slush hydrogen production and utilization technologies, (1994) International Journal of Hydrogen Energy, 19 (6), pp. 491-496.
  42. Zhang, L., Sherif, S.A., Veziroĝlu, T.N., Sheffield, J.W., On exergy losses in AMR hydrogen liquefiers, (1994) International Journal of Hydrogen Energy, 19 (5), pp. 447-452.
  43. Sheffield, J. W., 17th World Energy Engineering Congress, "In Transition from Energy Audits to Industrial Assessements," Association of Energy Engineers, Atlanta, GA. (December 8, 1994).

  44. Gursu, S., Sherif, S.A., Veziroglu, T.N., Sheffield, J.W., Analysis and optimization of thermal stratification and self pressurization effects in liquid hydrogen storage systems - Part 1: model development, (1993) Journal of Energy Resources Technology, Transactions of the ASME, 115 (3), pp. 221-227.
  45. Gursu, S., Sherif, S.A., Veziroglu, T.N., Sheffield, J.W., Analysis and optimization of thermal stratification and self-pressurization effects in liquid hydrogen storage systems - part 2: model results and conclusions, (1993) Journal of Energy Resources Technology, Transactions of the ASME, 115 (3), pp. 228-231.
  46. Zhang, L., Sherif, S.A., Veziroglu, T.N., Sheffield, J.W., Second law analysis of active magnetic regenerative hydrogen liquefiers, (1993) Cryogenics, 33 (7), pp. 667-674.
  47. Chung, K.C., Sheffield, J.W., Sauer Jr., H.J., O'Keefe, T.J., Williams, A., Thermal contact conductance of a phase-mixed coating layer by transitional buffering interface, (1993) Journal of Thermophysics and Heat Transfer, 7 (2), pp. 326-333.
  48. Chung, K.C., Sheffield, J.W., Sauer Jr., H.J., Thermal constriction resistance of phase-mixed metallic coatings, (1992) Journal of Heat Transfer, 114 (4), pp. 811-818.
  49. Chung, K. C., Sheffield, J. W., Sauer, H. J. (1992). Effects of Metallic Coated Surfaces on Thermal Contact Conductance:  An Experimental Study. In T. N. Veziroglu (Ed.), Heat and Mass Transfer: An Era of Change (vol. 1). Nova Science Publishers, Inc.

  50. Sheffield, J. W., NSF/DITAC Collaborative Workshop - Thermal Conductance Enhancement in Microelectronics, "Overview of Microelectronics and Thermal Contact Conductance," NSF/DITAC, Melbourne, Australia. (May 5, 1992).

  51. Sheffield, J. W., NSF/DITAC Collaborative Workshop - Thermal Conductance Enhancement in Microelectronics, "Thermal Contact Conductance of Metal to Metal and Metal to Ceramic Joints within Microelectronic Packages," NSF/DITAC, Melbourne, Australia. (May 5, 1992).

  52. Zhang, L., Veziroglu, T.N., Sherif, S.A., Sheffield, J.W., Performance analysis of reciprocating magnetic liquefiers, (1991) American Society of Mechanical Engineers (Paper), pp. 1-10.
  53. Gursu, S., Veziroglu, T.N., Sherif, S.A., Sheffield, J.W., Analysis and optimization of thermal stratification and self-pressurization effects in liquid hydrogen storage systems, (1991) American Society of Mechanical Engineers (Paper), pp. 1-11.
  54. Chung, K.C., Sheffield, J.W., Sauer Jr., H.J., Thermal constriction resistance of phase-mixed metallic coatings, (1991) American Society of Mechanical Engineers, Heat Transfer Division, (Publication) HTD, 173, pp. 27-33.
  55. Sheffield, J. W., International Symposium on Energy, Environment and Economics, "Energy Conservation Opportunities for Industrial Manufacturing Facilities," Baku, Azerbaijan. (August 20, 1991).

  56. Sheffield, J. W., Wen, C., Leland, J. E. (1990). Melting heat transfer inside a cylinder. In T. N. Veziroglu (Ed.), Multiphase Transport and Particulate Phenomena (vol. 1, pp. 447-459). Hemisphere Publ. Corp.

  57. Petkov, T., Veziroǧlu, T.N., Sheffield, J.W., An outlook of hydrogen as an automotive fuel, (1989) International Journal of Hydrogen Energy, 14 (7), pp. 449-474.
  58. Wen, C., Sheffield, J.W., O'Dell, M.P., Leland, J.E., Analytical and experimental investigation of melting heat transfer, (1989) Journal of Thermophysics and Heat Transfer, 3 (3), pp. 330-339.
  59. Sheffield, J.W., Wood, R.A., Sauer Jr., H.J., Experimental investigation of thermal conductance of finned tube contacts, (1989) Experimental Thermal and Fluid Science, 2 (1), pp. 107-121.
  60. Sauer, H. J., Sheffield, J. W. (1988). A correlation for the contact conductance in finned tube heat exchanger. In D. W. Yarbrough (Ed.), Thermal Conductivity 19:  Proceedings of the Nineteenth International Thermal Conductivity Conference. New York, New York: Plenum Publishing Corporation.

  61. Sheffield, J. W., Sauer, H. J., Wood, R. A. (1987). An experimental method for measuring the thermal contact resistance of plate finned tube heat exchangers. ASHRAE Transactions, 93, pp. 776-785.

  62. Wood, R. A., Sheffield, J. W., Sauer, H. J. (1987). Thermal contact conductance of finned tubes:  a generalized correlation. ASHRAE Transactions, 93, pp. 786-797.

  63. Wood, R. A., Sheffield, J. W., Sauer, H. J. (1987). Thermal contact conductance of finned tubes:  the effect of various parameters. ASHRAE Transactions, 93, pp. 798-810.

  64. Sheffield, J.W., Stafford, B.D., Sauer Jr., H.J., Finned tube contact conductance: empirical correlation of thermal conductance, (1985) ASHRAE Transactions, 91 (pt 1A), pp. 442-452.
  65. Sheffield, J. W., Veziroglu, T. N. (1987). Hydrogen-hydride systems and applications. Proceedings of the 1986 International Congress on Renewable Energy Sources (vol. 1, pp. 786-841). Madrid, Spain: Consejo Superior de Investigaciones Cientificas.

  66. Ernest, T. L., Sheffield, J. W., Sauer, H. J. (1985). Finned tube contact conductance: characterizing the integrity of the mechanical bond, ASHRAE Transaction 91, pp. 85-99.
  67. Fox, Barry R., Brewster, Larry T., Kher, Raghav P., Sheffield, John W., Van Griethuysen, Valerie J., Design assistant for spacecraft thermal management systems. (1985) Proceedings of the Intersociety Energy Conversion Engineering Conference, pp. 425-429.
  68. Sheffield, John W., Kher, Raghav P., Van Griethuysen, Valerie J., Phase change materials for spacecraft thermal management. (1984) Proceedings of the Intersociety Energy Conversion Engineering Conference, pp. 152-157.
  69. Sheffield, J.W., Van Griethuysen, V.J., Weight Characteristics of Future Spacecraft Thermal Management Systems. (1984) AIAA Paper, 6 p.
  70. Sheffield, J.W., Veziroglu, T.N., Fundamentals and Applications of Hydrides, International Symposium-Workshop on Renewable Energy Sources.; Pakistan Council of Scientific & Industrial Research,Lahore, Pa.(1983) pp. 319-343.
  71. El-Bassuoni, A.-M.A., Sheffield, J.W., Veziroglu, T.N., Hydrogen and fresh water production from sea water, (1982) International Journal of Hydrogen Energy, 7 (12), pp. 919-923.
  72. El-Bassuoni, Abdel Monem A., Sheffield, John W., Veziroglu, T.Nejat, Thermoelectrochemical hydrogen production using sodium chloride. (1982) Alternative Energy Sources: Proceedings of the Miami International Congress on Energy and the Environment, 8, pp. 3389-3403.
  73. Chen, D. Z., Gurkan, I., Sheffield, J. W., Veziroglu, T. N. (1982). Effective Cost of Fuels: Comparison of Hydrogen with Fossil Fuels. In T.N. Veziroglu, W.D. Van Vorst, J.H. Kelley (Ed.), Hydrogen Energy Progress - IV (vol. 4, pp. 1523-1538). Pergamon Press.

  74. Sheffield, J. W. (1982). Enhanced Heat Conduction During Solidification of Thermal Energy Storage Systems. In T. N. Veziroglu (Ed.), Alternative Energy Sources IV (vol. 1, pp. 357-365). Ann Arbor Science.

  75. Mentes, A., Veziroglu, T.N., Samudrala, R., Sheffield, J.W., Williams, A., Effect of Interface Gases on Contact Conductance. (1981) AIAA Paper, 7 p.
  76. Sheffield, J.W., Veziroglu, T.N., Williams, A., Thermal Contact Conductance of Coated Multilayered Sheets. (1980) AIAA Paper, 7 p.
  77. Sheffield, J.W. On the accuracy of the zeroth order solution of heat conduction equation for a slab with time dependent heat transfer coefficient at the boundaries, (1975) Letter of Heat and Mass Transfer, 2 (1), pp.49-50.
Maher Shehadi
  1. Shehadi, M., Hosni, M., Jones, B. (2017). Air Flow and Turbulence Analysis Inside a Wide-Body Aircraft Cabin Mockup. Indoor Built and Environment.
  2. Shehadi, M., Jones, B., Hosni, M. (2016). Characterization of the frequency and nature of bleed air contamination events in commercial aircraft. Indoor Air, 25(3), 11.
  3. Shehadi, M., Jones, B., and Hosni, M. (2015). Bleed Air Contamination Financial Related Costs on Board Commercial Flights. SAE International Journal of Aerospace, Vol. 8(2); pp. 310-315. DOI 10.427/2015-01-9007
  4. Shehadi, M., Hosni, M., and Jones, B. (2014). Airflow Distribution in the Longitudinal Plan of a Boeing 767 Mockup Cabin. ASME 2014 International Mechanical Engineering Congress & Exposition, Montreal.
  5. Shehadi, M. (2011). Solar Cooling: An Energy Conservation Approach - A Parametric Study for Residential Buildings in South Lebanon. International Association for Energy Economics - Economics of Energy & Environmental Policy Journal, 2, pp. 12-32.    
  6. Shehadi, M., Hosni, M., and Jones, B. (2010). Experimental Investigation of Optimal Particulate Sensor Location In An Aircraft Cabin. ASME 2010 3rd Joint US-European Fluids Engineering Summer Meeting collocated with 8th International Conference on Nanochannels, Microchannels, and Minichannels, Montreal, Canada, Volume 1, pp. 849-859.

Pages