Jorge Camba

Jorge Dorribo Camba

Associate Professor

jdorribo@purdue.edu

765-496-0629

Knoy Hall 129

West Lafayette, Indiana 47907

Dr. Camba's research focuses on intelligent Computer-Aided Design systems and their connection to digital manufacturing processes. Specifically, he studies digital product model quality and complexity; automation and reusability of design engineering knowledge and methods; change and configuration management; and Model-Based Enterprise technologies. Dr. Camba works on the development of new methods and tools for quality assurance, optimization, and reusability of digital product models, communication of design intent, as well as innovative sketch-based parametric modeling interfaces and mixed reality environments for engineering design.

Education:

PhD (Cum Laude), Systems and Engineering Management. Universidad Politécnica de Valencia, Spain (2014).
Master of Science, Technology (Digital Media). East Tennessee State University, TN (2007).
Master of Science, Computer Science and Engineering. Universidad de Vigo, Spain (2005).
Bachelor of Science, Computer Science and Engineering. Universidad de Vigo, Spain (2003).

Academic Appointments:

2022-Present. Associate Professor. School of Engineering Technology. Purdue University. West Lafayette, IN.
2022-Present. Associate Professor (by courtesy). Department of Computer Graphics Technology. Purdue University. West Lafayette, IN.

2018- 2022. Associate Professor. Department of Computer Graphics Technology. Purdue University. West Lafayette, IN.
2014-2018. Assistant Professor. Industrial Design, Gerald D. Hines College of Architecture and Design. University of Houston. Houston, TX.
2007-2015. Lecturer. Department of Engineering Technology and Industrial Distribution. Dwight Look College of Engineering. Texas A&M University. College Station, TX.

Other Appointments:

2021- present. Senior Research Scientist (by courtesy). Department of Industrial Engineering. University of Naples Federico II. Naples, Italy

Purdue University Faculty Scholar (2021)
I3B Fellow, Institute for Research and Innovation in Bioengineering - Valencia, Spain (2021).
Best Paper Award Nominee, IFIP 18th International Conference on Product Lifecycle Management (2021)
Purdue University, Seed for Success Award (2020).
Best Paper Award. 18th International Conference on Human-Computer Interaction, 3rd International Conference on Learning and Collaboration Technologies (2016).
Outstanding Achievement Award in Engineering Graphics. SDC Publications (2013).

Books

Camba, J.D., Fuerst, T., Ewing, D. & Anderson, J. (2023). The CM2 Approach to Change and Configuration Management. eAcademicBooks. ISBN: 979-8-9864002-1-1 | 979-8-9864002-0-4.
Camba, J.D., Fuerst, T., Mueller, A. & Hartman, N. (2020). Essentials of Parametric Solid Modeling. eAcademicBooks. ISBN: 978-0-9962452-9-6.
Camba, J.D. & Company, P. (2020). Foundations of Computer Graphics: A User-Centered Approach. eAcademicBooks. ISBN: 978-0-9962452-1-0.
Mueller, A., Camba, J.D., Fuerst, T., & Ewing, D. (2020). Product Data Management for Industry Professionals - Aras Innovator Edition. eAcademicBooks. ISBN: 978-0-9962452-7-2.
Mueller, A., Camba, J.D., & Fuerst, T. (2019). Essentials of Product Data Management. Enabling the Digital Enterprise. eAcademicBooks. ISBN: 978-0-9962452-5-8.
Company, P. & Camba, J.D. (2018). 3D CAD with SolidWorks, Volume II: Advanced Design. Publicaciones de la Universitat Jaume I, Colección Sapientia, 45 (in Spanish). ISBN: 978-84-17429-27-0.
Camba, J.D., Otey, J., & Whiteacre, M. (2014). Design Graphics for Engineering Communication. SDC Publications. ISBN: 978-1-58503-909-8|ISBN-10: 1585039098.
Camba, J.D., Otey, J., Contero, & M., Alcañiz, M. (2013). Visualization and Engineering Design Graphics using Augmented Reality. 2nd Edition. SDC Publications. ISBN: 978-1-58503-905-0|ISBN-10: 1585039055.
Camba, J.D., Otey, J., & Whiteacre, M. (2010). Foundations of Graphics for Engineers. 3rd Edition. Pearson Publishing. Boston, MA. ISBN: 978-1256804451|ISBN-10: 1256804452.

Book Chapters

Camba, J.D., Hartman, N., & Bertoline, G.R. (2023). Computer-Aided Design, Computer-Aided Engineering, and Visualization. In Springer Handbook of Automation, pp. 641-659, 2nd Ed. Cham: Springer International Publishing. Berlin, Heidelberg.

Journal Articles

Bartlett, K., Camba, J.D. (2023). Is this a real 3D shape? An investigation of construct validity and item difficulty in the PSVT:R. Visual Cognition (in press). https://doi.org/10.1080/13506285.2023.2250508.
Bartlett, K., Camba, J.D. (2024). Toward a Broader Understanding of Spatial Ability in CAD Education. Computer Aided Design and Applications, 21(1), 39-54. https://doi.org/10.14733/cadaps.2024.39-54.
Aranburu, A., Camba, J.D., Justel, D., Contero, M. (2023). An Improved Explicit Reference Modeling Strategy for Parametric Design. Computer-Aided Design, 161, 103541. https://doi.org/10.1016/j.cad.2023.103541.
Conesa, J., Mula, F.J., Contero, M., Camba, J.D. (2023). A Multi-Agent Framework for Collaborative Geometric Modeling in Virtual Environments. Engineering Applications of Artificial Intelligence, 123, Part A, 106257. https://doi.org/10.1016/j.engappai.2023.106257.
Contero, M., Pérez-López, D., Company, P., Camba, J.D. (2023). A Quantitative Analysis of Parametric CAD Model Complexity and Its Relationship to Perceived Modeling Complexity. Advanced Engineering Informatics, 56, 101970. https://doi.org/10.1016/j.aei.2023.101970.
Bartlett, K., Camba, J.D. (2023). An RGB-D Sensor-Based Instrument for Sitting Balance Assessment. Multimedia Tools and Applications, 82, 27245–27268. https://doi.org/10.1007/s11042-023-14518-7.
Company, P., Camba, J.D., Patalano, S., Vitolo, F., Lanzotti, A. (2023). A Functional Classification of Text Annotations for Engineering Design. Computer-Aided Design, 158, 103486. https://doi.org/10.1016/j.cad.2023.103486.
Palacios-Ibáñez, A., Pirault, S., Ochando-Martí, F., Contero, M., Camba, J.D. (2023). An Examination of the Relationship between Visualization Media and Consumer Product Evaluation. IEEE Transactions on Visualization and Computer Graphics (in press). https://doi.org/10.1109/TVCG.2023.3238428.
Bartlett, K., Camba, J.D. (2023). Gender differences in spatial ability: A critical review. Educational Psychology Review, 35(1), 8. https://doi.org/10.1007/s10648-023-09728-2.
Palacios-Ibáñez, A., Alonso-García, M., Contero, M., Camba, J.D. (2023). The influence of hand tracking and haptic feedback for virtual prototype evaluation in the product design process. Journal of Mechanical Design, Transactions of the ASME. 145(4): 041402. https://doi.org/10.1115/1.4055952.
Palacios-Ibáñez, A., Navarro-Martínez, R., Blasco-Esteban, J., Contero, M., Camba, J.D. (2023). On the application of extended reality technologies for the evaluation of product characteristics during the initial stages of the product development process. Computers in Industry, 144, 103780. https://doi.org/10.1016/j.compind.2022.103780.
Bartlett, K., Camba, J.D. (2023). The Role of a Graphical Interpretation Factor in the Assessment of Spatial Visualization: A Critical Analysis. Spatial Cognition and Computation, 23:1, 1-30. https://doi.org/10.1080/13875868.2021.2019260.
Aranburu, A., Cotillas, J., Justel, D., Contero, M., Camba, J.D. (2022). How Does the Modeling Strategy Influence Design Optimization and the Automatic Generation of Parametric Geometry Variations? Computer-Aided Design, 151, 103364. https://doi.org/10.1016/j.cad.2022.103364.
Aranburu, A., Justel, D., Contero, M., Camba, J.D. (2022). Geometric variability in parametric 3D models: Implications for engineering design. Procedia CIRP, 109, 383-388. https://doi.org/10.1016/j.procir.2022.05.266.
Camba, J.D., Company, P., Naya, F. (2022). Sketch-Based Modeling in Mechanical Engineering Design: Current Status and Opportunities. Computer-Aided Design, 150, 103283. https://doi.org/10.1016/j.cad.2022.103283.
Camba, J.D., Company, P., Byrd, V. (2022). Identifying Deception as a Critical Component of Visualization Literacy. IEEE Computer Graphics and Applications, 42(1), 116-122. https://doi.org/10.1109/MCG.2021.3132004.
Conesa, J., Camba, J.D., Aranda, J.A., Contero, M. (2022). An Agent-Based Paradigm for Virtual Modeling. Expert Systems with Applications, 192, 116393. https://doi.org/10.1016/j.eswa.2021.116393.
Agost, M.J., Company, P., Contero, M., Camba, J.D. (2022). CAD Training for Digital Product Quality: A Formative Approach with Adaptable Resources for Self-Assessment. International Journal of Technology and Design Education, 32, 1393-1411. https://doi.org/https://doi.org/10.1007/s10798-020-09651-5.
Zhou, J., Camba, J.D. (2021). Computer-Aided Process Planning in Immersive Environments: A Critical Review. Computers in Industry 133, 103547. https://doi.org/10.1016/j.compind.2021.103547.
González-Lluch, C., Plumed, R., Pérez-López, D., Company, P., Contero, M., Camba, J.D. (2021). A Constraint Redundancy Elimination Strategy to Improve Design Reuse in Parametric Modeling. Computers in Industry, 129, 103460. https://doi.org/10.1016/j.compind.2021.103460.
Jones, M., Hutcheson, S., & Camba, J.D. (2021). Past, Present, and Future Barriers to Digital Transformation in Manufacturing: A Review. Journal of Manufacturing Systems, 60, 936-948. https://doi.org/10.1016/j.jmsy.2021.03.006.
Camba, J.D., Contero, M., Company, P., & Hartman, N. (2021). The Cost of Change in Parametric Modeling: A Roadmap. Computer-Aided Design and Applications, 18(3), 634-643. https://doi.org/10.14733/cadaps.2021.634-643.
Plumed, R., González-Lluch, C., Pérez‑López, D., Contero, M., Camba, J.D. (2020). A Voice-Based Annotation System for Collaborative Computer-Aided Design. Journal of Computational Design and Engineering, 1–11. https://doi.org/10.1093/jcde/qwaa092.
Fonseca, D., García-Peñalvo, F.J., & Camba, J.D. (2020). New methods and technologies for enhancing usability and accessibility of educational data. Universal Access in the Information Society, 1-7. https://doi.org/10.1007/s10209-020-00765-0.
Basu, T., Bannova, O., Camba, J.D. (2021). Mixed Reality Architecture in Space Habitats. Acta Astronautica, 178, 548-555. https://doi.org/10.1016/j.actaastro.2020.09.036.
Company, P., Naya, F., Contero, M., Camba, J.D. (2020). On the role of geometric constraints to support design intent communication and model reusability. Computer-Aided Design and Applications, 17(1), 61-76. https://doi.org/10.14733/cadaps.2020.61-76.
Bannova, O., Häuplik-Meusburger, S., Bishop, S., Camba, J.D. (2020). Mixed reality in the design of space habitats. Room - The Space Journal, 1(1), 58–63. http://hdl.handle.net/20.500.12708/140197.
Company, P., Plumed, R., Varley, P., & Camba, J.D. (2019). Algorithmic perception of vertices in sketched drawings of polyhedral shapes. ACM Transactions on Applied Perception, 16(3), 18. https://doi.org/10.1145/3345507.
Company, P., Otey, J., Agost, M.J., Contero, M., & Camba, J.D. (2019). Teachers as designers of formative e-rubrics: A case study on the introduction and validation of Go/No-Go criteria. Universal Access in the Information Society, 18(3), 675-688. https://doi.org/10.1007/s10209-019-00686-7.
Bannova, O., Camba, J.D., Bishop, S. (2019). Projection-Based Visualization Technology and its Design Implications in Space Habitats. Acta Astronautica, 160, 310-316. https://doi.org/10.1016/j.actaastro.2019.04.053.
Otey, J., Company, P., Contero, M., & Camba, J.D. (2018). Assessment of parametric assembly models based on CAD quality dimensions. Computer-Aided Design and Applications, 16(4), 628-653. https://doi.org/10.14733/cadaps.2019.628-653
Camba, J.D., Kimbrough, M., & Kwon, E. (2018) Conceptual product design in digital and traditional sketching environments: a comparative exploratory study. Journal of Design Research, 16(2), 131-154. https://doi.org/10.1504/JDR.2018.10014195.
González-Lluch, C., Company, P., Contero, M., Pérez-López, D., & Camba, J.D. (2018) On the effects of the fix geometric constraint in 2D profiles on the reusability of parametric 3D CAD models. International Journal of Technology and Design Education, 1-21. https://doi.org/10.1007/s10798-018-9458-z.
Salvador-Herranz, G., Camba, J.D., Naya, F., & Contero, M. (2018). Accessibility and tangible interaction in distributed workspaces based on multi-touch surfaces. Universal Access in the Information Society, 17(2), 1-10. https://doi.org/10.1007/s10209-017-0563-7.
González-Lluch, C., Company, P., Contero, M., Camba, J.D., & Colom, J. (2017). A case study on the use of model quality testing tools for the assessment of MCAD models and drawings. International Journal of Engineering Education, 33(5), 1643-1653.
Otey, J., Company, P., Contero, M., & Camba, J.D. (2017). Revisiting the design intent concept in the context of mechanical CAD education. Computer Aided Design and Applications 15(1), 1-14. https://doi.org/10.1080/16864360.2017.1353733.
Camba, J.D., Contero, M., Company, P., & Pérez, D. (2017). On the integration of model-based feature information in product lifecycle management systems. International Journal of Information Management 37(6), 611-621. https://doi.org/10.1016/j.ijinfomgt.2017.06.002.
Company, P., Contero, M., Otey, J., Camba, J.D., Agost, M.J., & Pérez-López, D. (2017). Web-based system for adaptable rubrics: case study on CAD assessment. Journal of Educational Technology & Society, 20(3), 24-41.
Reuter, E. & Camba, J.D. (2017). Understanding emergency workers' behavior and perspectives on design and safety in the workplace. Applied Ergonomics, 59, 73-83. https://doi.org/10.1016/j.apergo.2016.08.023.
González-Lluch, C., Company, P., Contero, M., Camba, J.D., & Plumed, R. (2017). A survey on 3D CAD model quality assurance and testing tools. Computer-Aided Design, 83, 64-79. https://doi.org/10.1016/j.cad.2016.10.003.
Camba, J.D., Contero, M., Salvador-Herranz, G., & Plumed, R. (2016). Synchronous communication in PLM environments using annotated CAD models. Journal of Systems Science and Systems Engineering, 25, 1-17. https://doi.org/10.1007/s11518-016-5305-5.
Camba, J.D., Contero, M., & Company, P. (2016). Parametric CAD modeling: an analysis of strategies for design reusability. Computer-Aided Design, 74, 18-31. https://doi.org/10.1016/j.cad.2016.01.003.
Camba, J.D., & Contero, M. (2015). Assessing the impact of geometric design intent annotations on parametric model alteration activities. Computers in Industry, 71, 35-45. https://doi.org/10.1016/j.compind.2015.03.006.
Camba, J., Contero, M., Johnson, M., & Company, P. (2014). Extended 3D annotations as a new mechanism to explicitly communicate geometric design intent and increase CAD model reusability. Computer-Aided Design, 57, 61-73. https://doi.org/10.1016/j.cad.2014.07.001.

Conference Proceedings

Palacios-Ibáñez, A., Contero, M., Camba, J.D. (2023). Emotion Recognition in Product Evaluation: Leveraging Face Tracking Data in Virtual Reality Environments. 32nd International Conference on Graphical Engineering (INGEGRAF). Cadiz, Spain. June 29-30 (accepted).
Bartlett, K., Young, A., Camba, J.D. (2023). Conceptual Product Development through Parametric Optimization: A Case Study on the Design of an Ophthalmic Instrument. 8th North American Industrial Engineering and Operations Management Conference. Houston, TX. June 13-16.
Company, P., Camba, J.D., Patalano, S., Lanzotti, A. (2023). On the Adoption of the STEP Neutral Format for Procedural Mechanical CAD Models. In: Gerbino, S., Lanzotti, A., Martorelli, M., Mirálbes Buil, R., Rizzi, C., Roucoules, L. (eds.) Advances on Mechanics, Design Engineering and Manufacturing IV. International Joint Conference on Mechanics, Design Engineering and Advanced Manufacturing (JCM 2022). Lecture Notes in Mechanical Engineering. Springer, Cham. Ischia, Italy. June 1-3. https://doi.org/10.1007/978-3-031-15928-2_59.
Bartlett, K.A., Camba, J.D. (2023). Is the PSVT:R Suitable for Evaluating Spatial Skill in Design? A Critique. In: Gero, J.S. (eds) Design Computing and Cognition’22. DCC 2022. Springer, Cham. Glasgow, Scotland, UK. July 4-6. https://doi.org/10.1007/978-3-031-20418-0_8
Contero-López, P., Camba, J.D., Contero, M. (2022). An Analysis of Influencer Marketing Effectiveness in Luxury Brands using Eye Tracking Technology. In: Amic G. Ho (eds) Human Factors in Communication of Design, 49, pp. 167-173. 13th International Conference on Applied Human Factors and Ergonomics (AHFE 2022). New York, NY, July 24-28. http://doi.org/10.54941/ahfe1002051
Palacios-Ibanez, A., Camba, J.D., Contero, M. (2022). The Influence of the Visualization Modality on Consumer Perception: A Case Study with Household Products. In: Amic G. Ho (eds) Human Factors in Communication of Design, 49, pp. 160-166. 13th International Conference on Applied Human Factors and Ergonomics (AHFE 2022). New York, NY, July 24-28. http://doi.org/10.54941/ahfe1002050.
Zhou, J., Camba, J.D., Hartman, N., Li, Z. (2022). An Approach to Extend the Digital Thread from Requirements to Model Geometry. ASME 2022 17th International Manufacturing Science and Engineering Conference. Volume 1: Additive Manufacturing; Biomanufacturing; Life Cycle Engineering; Manufacturing Equipment and Automation; Nano/Micro/Meso Manufacturing. West Lafayette, Indiana, USA. June 27–July 1, 2022. V001T03A001. ASME. https://doi.org/10.1115/MSEC2022-80857.
Kozikowski, E., Hartman, N., Camba, J.D. (2022). Development and Evaluation of a Computer Vision System for Assembly Bolt Pattern Traceability and Poka-Yoke. ASME 2022 17th International Manufacturing Science and Engineering Conference. Volume 2: Manufacturing Processes; Manufacturing Systems. West Lafayette, Indiana, USA. June 27–July 1, 2022. V002T06A023. ASME. https://doi.org/10.1115/MSEC2022-85678.
Bartlett, K., Camba, J.D. (2022). An argument for visualization technologies in spatial skills assessment. In: Zaphiris, P., Ioannou, A. (eds) Learning and Collaboration Technologies. Designing the Learner and Teacher Experience. Lecture Notes in Computer Science, vol 13328, pp. 30-39. Springer, Cham. International Conference on Human-Computer Interaction. (Online due to COVD-19), June 26 – July 1. https://doi.org/10.1007/978-3-031-05657-4_3.
Fentiman, A., Sutherland, J., Delaurentis, D., Douglas, K., Camba, J.D., Kenley, C.R., Raz, A., Koehler, A., Huang, W., Hurt, A., Richardson, J. (2022). Work in Progress: Aligning a Professional Development Program with Industry Needs. American Society for Engineering Education Annual Conference and Exposition. Minneapolis, MN. June 26-29.
Bartlett, K., Camba, J.D. (2022). Isometric Projection as a Threat to Validity in the PSVT:R. American Society for Engineering Education Annual Conference and Exposition. Minneapolis, MN. June 26-29. https://peer.asee.org/40396.
Vázquez-Ingelmo, A., García-Peñalvo, F. J., Therón, R., Byrd, V., Camba, J.D. (2022) A proposal to measure the understanding of data visualization elements in visual analytics applications”. In A. Vázquez-Ingelmo, Y. Dimitriadis, A. Martínez Monés, F. J. García-Peñalvo (Eds.), Proceedings of the Learning Analytics Summer Institute Spain 2022 (LASI Spain 2022). Salamanca, Spain, June 20-21, 2022 (pp. 70-76). CEUR Workshop Proceedings, Vol. 3238. ISSN 1613-0073, online http://ceur-ws.org/Vol-3238/. Aachen, Germany: CEUR-WS.org. October 2022.
Aranburu, A., Justel, D., Contero, M., Camba, J.D. (2022). Geometric Variability in Parametric 3D Models: Implications for Engineering Design. 32nd CIRP DESIGN Conference. International Academy for Production Engineering. Paris, France. March 28-30.
Camba, J.D., Contero, M., Pérez-López, D. (2022). From Emotion to Geometry: The Analysis of Tone in Written Communication as a Computational Design Tool. 5th International Conference on Intelligent Human Systems Integration (IHSI 2022). Venice, Italy. Eds. T. Ahram, W. Karwowski, P. Di Bucchianico, R. Taiar, L. Casarotto and P. Costa, AHFE International. February 22-24. http://doi.org/10.54941/ahfe1001004.
Zhou, J., Camba, J.D., Fuerst, T. (2021). A Comparative Study on the Use and Interpretation of Annotated 3D Models. IFIP 18th International Conference on Product Lifecycle Management. Curitiba, Brazil. July, 11-14. Best Paper Award Nominee.
Byrd, V. & Camba, J.D. (2020). A Worksheet Method for Developing Research Questions: An Examination of Three Graduate Student Cohorts. IEEE Frontiers in Education Conference. (Online due to COVID-19). October 21-24. https://doi.org/10.1109/FIE44824.2020.9273883.
Bishop, S., Hauplik-Meusburger, S., Bannova, O., Camba, J.D., & Jurblum, M. (2020). The Bionomic Design Model - Bionomic Design and Mixed Reality as Passive Countermeasures in Terrestrial Analogs and Extraterrestrial Habitats. 50th International Conference on Environmental Systems (ICES 2020). (Online due to COVID-19). July 12-16.
Camba, J.D., Contero, M., Company, P., & Hartman, N. (2020). The Cost of Change in Parametric Modeling: A Roadmap. CAD’20 - 17th International CAD Conference. (Online due to COVID-19). July 6-8. pp.31-35. DOI: 10.14733/cadconfP.2020.31-35.
Byrd, V. & Camba, J.D. (2020). Design Activity Worksheets for Developing Research Questions. 2020 American Society for Engineering Education Annual Conference and Exposition. (Online due to COVD-19). June 21-24.
Camba, J.D., Naya, F., Perez-Lopez, D., & Contero, M. (2020). From Voice to Knowledge: A Proposal for a Voice Annotation System to Support Collaborative Engineering Design Processes. 53rd Hawaii International Conference on System Sciences (HICSS-53). Maui, HI. January 7-10.
Fuerst, T., Camba, J.D., & Barragato, A. (2020). Promoting Higher-Order Thinking Skills Through Collaborative Project-Based Design Learning and Product Data Management. 18th Annual Hawaii International Conference on Education. Honolulu, HI. January 4-7.
Basu, T., Bannova, O., & Camba, J.D. (2019). Mixed Reality Architecture in Space Habitats. 70th International Astronautical Congress (IAC), 17th IAA Symposium on Visions and Strategies for the Future. Washington, D.C. October 21-25.
Mueller, A., Camba, J.D., Hartman, N., Fuerst, T., & Astheimer, R. (2019). Development and Application of PDM Curriculum in Undergraduate Engineering and Technology Coursework. 11th International Conference on Engineering and Computer Education, ICECE 2019. Guimarães, Portugal. September 8 -11.
Soler-Domínguez, J.L., de-Juan-Ripoll, C., Camba, J.D., Contero, M., Alcañiz, M. (2019). Gaming background influence on VR performance and comfort: A study using different navigation metaphors. In: Antona M., Stephanidis C. (eds) Universal Access in Human Computer Interaction. Theory, Methods and Tools. Lecture Notes in Computer Science, 11572, pp. 646-656. Springer, Cham. International Conference on Human-Computer Interaction, HCI. Orlando, FL. July 26-31. DOI: 10.1007/978-3-030-23560-4_47.
Otey, J., Camba, J.D., Aranda Domingo, J.A., Contero, M. (2019). Barriers to Success in a Collaborative Technological Ecosystem: A Study on the Perception of the Interoperability Problem in Civil Engineering Education. In: Zaphiris P., Ioannou A. (eds.) Learning and Collaboration Technologies. Ubiquitous and Virtual Environments for Learning and Collaboration. Lecture Notes in Computer Science, 11591, pp. 343-352. Springer, Cham. International Conference on Human-Computer Interaction, HCI. Orlando, FL. July 26-31. DOI: 10.1007/978-3-030-21817-1_26.
Camba, J.D., Contero, M., Perez-Lopez, D., & Company, P. (2019). A Database Framework for the Characterization and Classification of Parametric Models Based on Complexity Metrics to Support Data Analytics. ASME 14th International Manufacturing Science and Engineering Conference, MSEC 2019. Erie, PA. June 10-14, 2019.
Del Re, K., Yun, S., Kozikowski, E., Fuerst, T., & Camba, J.D. (2019). Integrating a Project Lifecycle Management System into a Freshman Level Classroom Environment. American Society for Engineering Education Annual Conference and Exposition. Tampa, FL. June 16-19.
Otey, J., Camba, J.D., & Danney, N. (2019). Rethinking Computer-Aided Design in the Civil Engineering Curriculum: Impact and Lessons Learned. American Society for Engineering Education Annual Conference and Exposition. Tampa, FL. June 16-19.
Company, P., Varley, P.A.C., Plumed, R., & Camba, J.D. (2018). Detection of Vertices in Sketched Drawings of Polyhedral Shapes. 23rd Iberoamerican Congress on Pattern Recognition (CIARP-2018). Madrid, Spain. November 19-22.
Contero, M., Naya, F., Pérez-López, D., Company, P., & Camba, J.D. (2018). A Study on Sampling Strategies to Determine the Variability of Parametric History-Based 3D CAD Models. ASME 2018 International Mechanical Engineering Congress and Exposition, IMECE 2018. Pittsburgh, PA. November 9-15.
Bannova, O., Camba, J.D., & Bishop, S. (2018). Projection-Based Visualization Technology and Its Design Implications in Space Habitats. 69th International Astronautical Congress (IAC), 16th IAA Symposium on Visions and Strategies for the Future. Bremen, Germany. October 1-5.
Company, P., Otey, J., Agost, M.J., Contero, M. & Camba, J.D. (2018). Go/No Go Criteria in Formative E-Rubrics. Lecture Notes in Computer Science, 10925 (pp. 254-264). 20th International Conference on Human-Computer Interaction, HCI. Las Vegas, NV. July 15-20. DOI: 10.1007/978-3-319-91152-6_20.
Camba, J.D., Contero, M., Company, P., & Pérez, D., & Otey, J. (2018). Identifying High-Value CAD Models: An Exploratory Study on Dimensional Variability as Complexity Indicator. ASME 13th International Manufacturing Science and Engineering Conference, MSEC 2018. Volume 3: Manufacturing Equipment and Systems. College Station, TX. June 18-22. DOI: 10.1115/MSEC2018-6391.
Bannova, O. & Camba, J.D. (2018). Mars Surface and Transit Habitat Commonality: Design Considerations. 16th Biennial ASCE International Conference on Engineering, Science, Construction and Operations in Challenging Environments. ASCE Earth and Space Conference 2018. Cleveland, OH. April 9-12.
Camba, J.D., Feng, J., & Kwon, E. (2018) Interactive Experiences in Public Spaces: A Novel Floor Display System Based on Luminous Modular Units. 51st Hawaii International Conference on System Sciences (HICSS-51), pp. 303-312. Waikoloa Village, HI. January 3-6. DOI: 10.24251/HICSS.2018.040.
McCormack, C., Bannova, O., Bishop, S., & Camba, J.D. (2017). Designing for Maximum Adaptability Before, During and After Spaceflight. 68th International Astronautical Congress (IAC), 28th IAA Symposium on Space and Society. International Astronautical Federation, IAF, Vol. 18 (pp. 12224-12230). Adelaide, Australia. September 25-29.
Camba, J.D., Soler, J.L., & Contero, M. (2017). Immersive Visualization Technologies to Facilitate Multidisciplinary Design Education. Lecture Notes in Computer Science, 10295 (pp. 3-11). 19th International Conference on Human-Computer Interaction, HCI. Vancouver, Canada. July 9-14. DOI: 10.1007/978-3-319-58509-3_1.
Soler, J.L., Camba, J.D., Contero, M., & Alcañiz, M. (2017). A Proposal for the Selection of Eye-tracking Metrics for the Implementation of Adaptive Gameplay in Virtual Reality Based Games. Lecture Notes in Computer Science, 10280 (pp. 369-380). 19th International Conference on Human-Computer Interaction, HCI. Vancouver, Canada. July 9-14. DOI: 10.1007/978-3-319-57987-0_30.
Lew, E., Alviando, J., Kwon, E., & Camba, J.D. (2017). Gamifying the Eating Experience: An Interactive Companion for Children’s Nutrition Education and Behavior. Lecture Notes in Computer Science, 10295 (pp. 462-473). 19th International Conference on Human-Computer Interaction, HCI. Vancouver, Canada. July 9-14. DOI: 10.1007/978-3-319-58509-3_36.
Camba, J.D., Contero, M., Pérez-López, D., & Company, P. (2017). On the Application of Model-Based Definition Strategies to the Delivery of Technical Training. ASME 12th International Manufacturing Science and Engineering Conference, MSEC 2017. Vol. 3: Manufacturing Equipment and Systems. (pp. V003T04A016-V003T04A016) Los Angeles, CA. June 4-8. DOI: 10.1115/MSEC2017-2825.
Camba, J.D., Contero, M., & Company, P. (2017). CAD Reusability and the Role of Modeling Information in the MBE Context. Model-Based Enterprise Summit 2017. National Institute of Standards and Technology (NIST), US Department of Commerce. NIST Advanced Manufacturing Series 100-11. Gaithersburg, MD. April 3-7. DOI: 10.6028/NIST.AMS.100-11.
Camba, J.D., Bonnet de León, A., De la Torre, J., Saorin, J., & Contero, M. (2016). Application of Low-Cost 3D Scanning Technologies to the Development of Educational Augmented Reality Content. IEEE Frontiers in Education Conference (pp. 1-6). Erie, PA. October 12-15. DOI: 10.1109/FIE.2016.7757673
McEuen, A., Proffitt, J., Camba, J.D., & Kwon, E. (2016). &You: Design of a Sensor-Based Wearable Device for Use in Cognitive Behavioral Therapy. Advances in Human Factors and Ergonomics in Healthcare, Advances in Intelligent Systems and Computing, 482 (pp. 251-260). 7th International Conference on Applied Human Factors and Ergonomics. Orlando, FL. July 27-31. DOI: 10.1007/978-3-319-41652-6_24.
Cebrián Cifuentes, S., Gómez García, S., Puig Andrés-Sebastiá, M., Camba, J.D., & Contero, M. (2016). Augmented Reality Experiences in Therapeutic Pedagogy: A Study with Special Needs Students. IEEE 16th International Conference on Advanced Learning Technologies, ICALT2016 (pp. 431-435). Austin, TX. July 25-28. DOI: 10.1109/ICALT.2016.23.
Salvador-Herranz, G., Camba, J.D., Naya, F., & Contero, M. (2016). On the Integration of Tangible Elements with Multi-Touch Surfaces for the Collaborative Creation of Concept Maps. Lecture Notes in Computer Science, 9753 (pp. 177-186). 18th International Conference on Human-Computer Interaction, HCI. Toronto, Canada. July 17-22. DOI: 10.1007/978-3-319-39483-1_17. Best Paper Award.
Rojas, J.C., Contero, M., Camba, J.D., Castellanos, M.C., García-González, E., & Gil-Macián, S. (2015). Design Perception: Combining Semantic Priming with Eye Tracking and Event-Related Potential (ERP) Techniques to Identify Salient Product Visual Attributes. ASME International Mechanical Engineering Congress and Exposition, IMECE 2015 (pp. V011T14A035-V011T14A035). Houston, TX. November 13-19. DOI: 10.1115/IMECE2015-50956.
Camba, J.D., & Contero, M. (2015). From Reality to Augmented Reality: Rapid Strategies for Developing Marker-Based AR Content Using Image Capturing and Authoring Tools. IEEE Frontiers in Education Conference (pp. 859-864). El Paso, TX. October 21-24. DOI: 10.1109/FIE.2015.7344162.
Camba, J.D., & Contero, M. (2015). Improved Representation of Dependencies in Feature-Based Parametric CAD Models using Acyclic Digraphs. 10th International Conference on Computer Graphics Theory and Applications, GRAPP 2015 (pp. 16-25). Berlin, Germany. March 11-14. DOI: 10.5220/0005261500160025.
Camba, J., Cosín, A., & Contero, M. (2014). An Evaluation of Formal Strategies to Create Stable and Reusable Parametric Feature-Based 3D Models. ASME International Mechanical Engineering Congress and Exposition, IMECE 2014 (pp. V011T14A003-V011T14A003). Montreal, Quebec, Canada. November 14-20. DOI: 10.1115/IMECE2014-37859.
Camba, J., Contero, M., & Salvador-Herranz, G. (2014). Desktop vs. Mobile: A Comparative Study of Augmented Reality Systems for Engineering Visualizations in Education. IEEE Frontiers in Education Conference (pp. 924-931). Madrid, Spain. October 22-25. DOI: 10.1109/FIE.2014.7044138.
Salvador-Herranz, G., Bañó-Hernández, M., Contero, M., & Camba, J. (2014). Evaluation of a Distributed Collaborative Workspace as a Creativity Tool in the Context of Design Education. IEEE Frontiers in Education Conference (pp. 969-975). Madrid, Spain. October 22-25. DOI: 10.1109/FIE.2014.7044144.
Camba, J., Contero, M., & Salvador-Herranz, G. (2014). Implementation Challenges of Annotated 3D Models in Collaborative Design Environments. Lecture Notes in Computer Science 8683 (pp. 222–229). Springer International Publishing. 11th International Conference on Cooperative Design, Visualization, and Engineering, Seattle, WA. September 14-17. DOI: 10.1007/978-3-319-10831-5_33.
Salvador-Herranz, G., Contero, M., & Camba, J. (2014). Use of Tangible Marks with Optical Frame Interactive Surfaces in Collaborative Design Scenarios Based on Blended Spaces. Lecture Notes in Computer Science 8683 (pp. 253-260). Springer International Publishing. 11th International Conference on Cooperative Design, Visualization, and Engineering, Seattle, WA. September 14-17. DOI: 10.1007/978-3-319-10831-5_37.
Camba, J., Contero, M., Otey, J., & Company, P. (2014). Explicit Communication of Geometric Design Intent in CAD: Evaluating Annotated Models in the Context of Reusability. ASME 2014 International Design and Engineering Technical Conferences & Computers and Information in Engineering Conference, IDETC/CIE (pp. V007T07A014-V007T07A014). Buffalo, NY. August 17-20. DOI: 10.1115/DETC2014-34527.
Company, P., Otey, J., Camba, J., & Contero, M. (2014). Leveraging Mechanical 3D CAD Systems through Improved Model Quality based on Best Practices and Rubrics. ASME 2014 International Design and Engineering Technical Conferences & Computers and Information in Engineering Conference, IDETC/CIE (pp. V007T07A013-V007T07A013). Buffalo, NY. August 17-20. DOI: 10.1115/DETC2014-34489.
Camba J., Contero M., & Johnson, M. (2014). Management of Visual Clutter in Annotated 3D CAD Models: A Comparative Study. Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), 8518 (pp. 405–416). 16th International Conference on Human-Computer Interaction, HCI. Crete, Greece. June 22-27. DOI: 10.1007/978-3-319-07626-3_37.
Otey, J., Company, P. Camba, J., & Contero, M. (2014). A Review of the Design Intent Concept in the Context of CAD Model Quality Metrics. American Society for Engineering Education Annual Conference and Exposition (pp. 24.100.1–24.100.10). Indianapolis, IN. June 15-18.
Camba, J., & Contero, M. (2014). Integration of Model-Based Design Annotations in Product Lifecycle Management Systems to Facilitate Design Intent Communication. 10th International Symposium on Tools and Methods of Competitive Engineering, TMCE 2014 (pp. 1067-1076). Budapest, Hungary. May 19-23.
Camba, J., Contero, M., & Salvador-Herranz, G. (2014). Speak with the Annotator: Promoting Interaction in a Knowledge-Based CAD Environment Built on the Extended Annotation Concept. IEEE 18th International Conference on Computer Supported Cooperative Work in Design, CSCWD 2014 (pp. 196-201). Hsinchu, Taiwan. May 21-23. DOI: 10.1109/CSCWD.2014.6846841.
Salvador-Herranz, G., Contero, M., & Camba, J. (2014). A Collaborative Design Graphical Tool Based on Interactive Spaces and Natural Interfaces: A Case Study on an International Design Project. 18th IEEE International Conference on Computer Supported Cooperative Work in Design, CSCWD 2014 (pp. pp. 510-515). Hsinchu, Taiwan. May 21-23. DOI: 10.1109/CSCWD.2014.6846897.
Dorribo-Camba, J., Alducin-Quintero, G., Perona, P., & Contero, M. (2013). Enhancing Model Reuse through 3D Annotations: A Theoretical Proposal for an Annotation-Centered Design Intent and Design Rationale Communication. ASME 2013 International Mechanical Engineering Congress and Exposition, IMECE 2013 (pp. V012T13A010-V012T13A010). San Diego, CA. November 13-21. DOI: 10.1115/IMECE2013-64595.
Dorribo-Camba, J., & Contero, M. (2013). Incorporating Augmented Reality Content in Engineering Design Graphics Materials. 2013 IEEE Frontiers in Education Conference (pp. 35-40). Oklahoma City, OK. October 23-36. DOI: 10.1109/FIE.2013.6684784.
De la Torre, J., Saorín, J., Contero, M., & Dorribo-Camba, J. (2013). Interactive Sketching in Multi-Touch Digital Books. A Prototype for Technical Graphics. 2013 IEEE Frontiers in Education Conference (pp. 190-194). Oklahoma City, OK. October 23-36. DOI: 10.1109/FIE.2013.6684814.
Naya, F., Contero, M., & Dorribo-Camba, J. (2013). A Multi-Touch Application for the Automatic Evaluation of Dimensions in Hand-Drawn Sketches. 2013 IEEE Frontiers in Education Conference (pp. 195-199). Oklahoma City, OK. October 23-36. DOI: 10.1109/FIE.2013.6684815.
Salvador-Herranz, G., Contero, M., & Dorribo-Camba, J. (2013). Management of Distributed Collaborative Learning Environments Based on a Conceptual Map Paradigm and Natural Interfaces. 2013 IEEE Frontiers in Education Conference (pp. 1486-1491). Oklahoma City, OK. October 23-36. DOI:10.1109/FIE.2013.6685084.
Whiteacre, M., & Dorribo Camba, J. (2009). From Virtual to Physical: Rapid Prototyping as a Tool to Integrate Graphics in a Mainline Engineering Class. ASEE Engineering Design Graphics Division 64th Midyear Conference (pp. 183-188). Erie, PA. October 14-16.
Otey, J., & Dorribo Camba, J. (2009). Embedded Video in Engineering Freshmen Robotics Instruction. 12th International Conference in Interactive Computer Aided Learning, ICL 2009 (pp. 324-329). Villach, Austria. September 23-25.
Dorribo Camba, J., & Potter, D. (2007). A Collaborative Approach to Concept Design for 3D Character Modeling. 4th International Digital Media & Arts Association Conference. Philadelphia, PA. November 8-10.
Dorribo Camba, J., & Fitzgerald M. (2007). A Learning Tool to Assist in Animation of Bipedal Walk Cycles. American Society for Engineering Education Annual Conference and Exposition (pp. 12.57.1–12.57.9). Honolulu, HI. June 24-27.

Presentations

Camba, J.D., Fuerst, T., Hutcheson, S., Cappelleri, D., Jun, B.G. (2020). Material Handling for Industry 4.0 in Small and Medium Enterprises (SMEs). Poster presentation. International Exhibition for Manufacturing, Distribution and Supply Chain Marketplace – MODEX 2020. Atlanta, GA. March 9-12.
Camba, J.D. (2020). Aerospace & Defense Roundtable 2020. Invited Panelist. Aras Corp. December 9.
Fuerst, T., Camba, J.D. (2020). Foundational PLM for University Students. Invited panelists, Aras Thought Leadership Webinar. June 18.
Camba, J.D. (2019). Product Data Management in the Engineering Curriculum. Siemens Academic Summit. Cincinnati, OH. August, 28.
Fuerst, T., Camba, J.D., Del Re, K., Kozikowski, E. (2019). Introducing PLM in the Undergraduate Curriculum. Aras Congress and Exposition (ACE 2019). Phoenix, AZ. April 15-18.
Camba, J.D., Bannova, O. (2019). Introducing Visual Novelty in Space Habitats: A Study on Projections as Mechanisms to Augment Perception. 2019 NASA Human Research Program Investigator’s Workshop. Galveston, TX. January 22-25.
Bannova, O. and Camba, J.D. (2018). Immersive Technologies in the Designed Environment and their Role as Psychological Countermeasures in Space Missions. 2018 NASA Human Research Program Investigator’s Workshop. Galveston, TX. January 22-25.
Camba, J.D. (2017). Digital Product Model Quality: Implications for Engineering Design and Manufacturing. Purdue University, West Lafayette, IN. September 28.
Camba, J.D. (2017). Beyond Printed Pages: Interaction and Assessment in Digital Books. The Case of 3D Visualization. 3rd Annual Innovative Teaching & Learning Symposium, ITLS 2017. University of Houston, Houston, TX. April 21.
Camba, J.D., Contero, M., & Company, P. (2017). CAD Reusability and the Role of Modeling Information in the MBE Context. MBE Summit 2017. National Institute of Standards and Technology (NIST), US Department of Commerce. Gaithersburg, MD. April 3-7.
Camba, J.D. (2016). Enhancing Learning Experiences with Augmented 3D Visualizations. 2nd Annual Innovative Teaching & Learning Symposium, ITLS 2016. University of Houston, Houston, TX. April 15.
Camba, J.D. (2015). Interactive Technologies for Engineering and Product Design. Texas A&M University – Corpus Christi (TAMUCC). Corpus Christi, TX. April 15.
Camba, J.D. (2015). Human-Centered Technology to Support Design Activities. Gerald D. Hines College of Architecture. University of Houston. Houston, TX. February 18.
Camba, J.D. (2014). Sustainability in Product Design. Gerald D. Hines College of Architecture. University of Houston. Houston, TX. May 23.
Camba, J.D. (2006). Multimedia Content Creation with Open Source Software. Jornadas Técnicas sobre Software Libre. La Internet estándar (in Spanish). Universidad de Vigo, Spain. June 27.
Camba, J.D. (2005). Cartoon-Style Rendering of 3D models. Niswonger Digital Media Center. East Tennessee State University. Johnson City, TN. June 2.
Camba, J.D. (2003). 2D Image Morphing Generation System. ExpoEnter 2003: Salón Multimedia y de Telecomunicaciones (in Spanish). Ourense, Spain.

Purdue Polytechnic Institute

Global mobile menu

Jorge Camba

Jorge Dorribo Camba

Associate Professor

Education:

Academic Appointments:

Other Appointments:

Books

Book Chapters

Journal Articles

Conference Proceedings

Presentations

College Affiliations

Information

Explore

Resources

About